AutoConnectConfig API

Constructor

AutoConnectConfig

AutoConnectConfig()

AutoConnectConfig(const char* ap, const char* password)

AutoConnectConfig(const char* ap, const char* password, const unsigned long timeout)

AutoConnectConfig(const char* ap, const char* password, const unsigned long timeout, const uint8_t channel)

Parameters

apSSID for SoftAP. The length should be up to 31. The default value is esp8266ap for ESP8266, esp32ap for ESP32.

passwordPassword for SodtAP. The length should be from 8 to up to 63. The default value is 12345678.

timeoutThe timeout value of the captive portal in [ms] units. The default value is 0.

channelThe channel number of WIFi when SoftAP starts. The default values is 1.

Public member variables

apid

SoftAP's SSID.

Type

String The default value is esp8266ap for ESP8266, esp32ap for ESP32.

apip

Sets IP address for Soft AP in captive portal. When AutoConnect fails the initial WiFi.begin, it starts the captive portal with the IP address specified this.

Type

IPAddressThe default value is 192.168.244.1

autoReconnect

Automatically will try to reconnect with the past established access point (BSSID) when the current configured SSID in ESP8266/ESP32 could not be connected. By enabling this option, AutoConnect::begin() function will attempt to reconnect to a known access point using credentials stored in the EEPROM, even if the connection failed by current SSID.
If the connection fails, starts the captive portal in SoftAP+STA mode.

Type

bool

Value

trueReconnect automatically.

falseStarts Captive Portal in SoftAP + STA mode without trying to reconnect. This is the default.

When the autoReconnect option is enabled, an automatic connection will behave if the following conditions are satisfied.

• Invokes AutoConnect::begin without user name and password parameter as begin().
• If one of the saved BSSIDs (not the SSID) of the credentials matches the BSSID detected by the network scan.

autoReset

Reset ESP8266 module automatically after WLAN disconnected.

Type

bool

Value

trueReset after WiFi disconnected automatically.

falseNo reset.

autoRise

Captive portal activation switch. False for disabling the captive portal. It prevents starting the captive portal even if the connection at the first WiFi.begin fails.

Type

bool

Value

trueEnable the captive portal. This is the default.

falseDisable the captive portal.

autoSave

The credential saved automatically at the connection establishment.

Type

AC_SAVECREDENTIAL_t

Value

AC_SAVECREDENTIAL_AUTO The credential saved automatically. This is the default.

AC_SAVECREDENTIAL_NEVER The credential no saved.

bootUri

Specify the location to be redirected after module reset in the AutoConnect menu. It is given as an enumeration value of AC_ONBOOTURI_t indicating either the AutoConnect root path or the user screen home path.

Type

AC_ONBOOTURI_t

Value

AC_ONBOOTURI_ROOT Resetting the module redirects it to the AutoConnect root path. The root path is assumed to be AUTOCONNECT_URI defined in AutoConnectDefs.h.

AC_ONBOOTURI_HOME It is redirected to the uri specified by AutoConnectConfig::homeUri.

boundaryOffset

Sets the offset address of the credential storage area for EEPROM. This value must be between greater than 4 and less than flash sector size. (4096 by SDK)
The default value is 0.

Type

uint16_t

It will conflict with user data.

If the sketch leaves this offset at zero, it will conflict the storage area of credentials with the user sketch owned data. It needs to use the behind of credential area.

channel

The channel number of WIFi when SoftAP starts.

Type

uint8_t

Value

1 ~ 14. The default value is 1.

How do I choose Channel

Espressif Systems had announced the application note about Wi-Fi channel selection.

dns1

Set primary DNS server address when using static IP address.

Type

IPAddress

dns2

Set secondary DNS server address when using static IP address.

Type

IPAddress

gateway

Sets gateway address for Soft AP in captive portal. When AutoConnect fails the initial WiFi.begin, it starts the captive portal with the IP address specified this.

Type

IPAddressThe default value is 192.168.244.1

hidden

Sets SoftAP to hidden SSID.

Type

uint8_t

Value

0SSID will be appeared. This is the default.

1SSID will be hidden.

homeUri

Sets the home path of user sketch. This path would be linked from 'HOME' in the AutoConnect menu. The default for homeUri is "/".

Type

String

hostName

Sets the station host name of ESP8266/ESP32.

Type

String

immediateStart

Disable the first WiFi.begin() and start the captive portal. If this option is enabled, the module will be in AP_STA mode and the captive portal will be activated regardless of AutoConnectConfig::autoRise specification.

Type

bool

Value

trueStart the captive portal with AutoConnect::begin.

falseEnable the first WiFi.begin() and it will start captive portal when connection failed. This is default.

netmask

Sets subnet mask for Soft AP in captive portal. When AutoConnect fails the initial WiFi.begin, it starts the captive portal with the IP address specified this.

Type

IPAddressThe default value is 255.255.255.0

portalTimeout

Specify the timeout value of the captive portal in [ms] units. It is valid when the station is not connected and does not time out if the station is connected to the ESP module in SoftAP mode (ie Attempting WiFi connection with the portal function). If 0, the captive portal will not be timed-out.

Type

unsigned longCaptive portal timeout value. The default value is 0.

psk

Sets password for SoftAP. The length should be from 8 to up to 63. The default value is 12345678.

Type

String

retainPortal

Specify whether to continue the portal function even if the captive portal timed out. If the true, when a timeout occurs, the AutoConnect::begin function is exited with returns false, but the portal facility remains alive. So SoftAP remains alive and you can invoke AutoConnect while continuing sketch execution. The default is false.

Type

bool

Value

trueContinue the portal function even if the captive portal times out. The STA + SoftAP mode of the ESP module continues and accepts the connection request to the AP.

falseWhen the captive portal times out, STA + SoftAP mode of the ESP module is stopped. This is default.

Connection request after timed-out

With the retainPortal, even if AutoConnect::begin in the setup() is timed out, you can execute the sketch and the portal function as a WiFi connection attempt by calling AutoConnect::handleClient in the loop().

All unresolved addresses redirects to /_ac

If you enable the retainPortal option, all unresolved URIs will be redirected to SoftAPIP/_ac. It happens frequently as client devices repeat captive portal probes in particular. To avoid this, you need to exit from the WiFi connection Apps on your device once.

staip

Set a static IP address. The IP will behave with STA mode.

Type

IPAddress

staGateway

Set the gateway address when using static IP address.

Type

IPAddress

staNetmask

Set the subnetmask when using static IP address.

Type

IPAddress

title

Set the menu title.

Type

String

AutoConnectConfig example

AutoConenct        Portal;
AutoConenctConfig  Config("", "passpass");    // SoftAp name is determined at runtime
Config.apid = ESP.hostname();                 // Retrieve host name to SotAp identification
Config.apip = IPAddress(192,168,10,101);      // Sets SoftAP IP address
Config.gateway = IPAddress(192,168,10,1);     // Sets WLAN router IP address
Config.netmask = IPAddress(255,255,255,0);    // Sets WLAN scope
Config.autoReconnect = true;                  // Enable auto-reconnect
Config.autoSave = AC_SAVECREDENTIAL_NEVER;    // No save credential
Config.boundaryOffet = 64;                    // Reserve 64 bytes for the user data in EEPROM.
Config.portalTimeout = 60000;                 // Sets timeout value for the captive portal
Config.retainPortal = true;                   // Retains the portal function after timed-out
Config.homeUri = "/index.html";               // Sets home path of the sketch application
Config.title ="My menu";                      // Customize the menu title
Config.staip = IPAddress(192,168,10,10);      // Sets static IP
Config.staGateway = IPAddress(192,168,10,1);  // Sets WiFi router address
Config.staNetmask = IPAddress(255,255,255,0); // Sets WLAN scope
Config.dns1 = IPAddress(192,168,10,1);        // Sets primary DNS address
Portal.config(Config);                        // Configure AutoConnect
Portal.begin();                               // Starts and behaves captive portal