The upload handler needs to implement processing based on the enumeration value of HTTPUpload.status as **HTTPUploadStatus** enum type. HTTPUploadStatus enumeration is as follows:
An upload handler needs to implement a procedure corresponding with **HTTPUploadStatus** enum value indicated by the uploading process of ESP8266WebServer class, which contained in HTTPUpload.status as following values:
- **`UPLOAD_FILE_START`** : Invokes to the \_open.
- **`UPLOAD_FILE_WRITE`** : Invokes to the \_write.
@ -224,7 +224,7 @@ Executing the above sketch will rewrite the menu title for the **FSBrowser** as
### <iclass="fa fa-caret-right"></i> Change the menu labels
You can change the label of the AutoConnect menu item by rewriting the default label letter in [AutoConnectLabels.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectLabels.h) macros. However, changing menu items letter influences all the sketch's build scenes.
You can change the label of the AutoConnect menu item by rewriting the default label letter in [AutoConnectLabels.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectLabels.h) macros. However, changing menu items letter influences all build scenes for the Sketch.
```cpp
#define AUTOCONNECT_MENULABEL_CONFIGNEW "Configure new AP"
@ -234,6 +234,7 @@ You can change the label of the AutoConnect menu item by rewriting the default l
#define AUTOCONNECT_MENULABEL_HOME "HOME"
#define AUTOCONNECT_BUTTONLABEL_RESET "RESET"
```
See also: [*Change label text*](changelabel.md)
### <iclass="fa fa-caret-right"></i> Combination with mDNS
@ -486,7 +487,7 @@ But this method is not recommended. The broadcast radio of SSID emitted from Sof
### <iclass="fa fa-caret-right"></i> Relocate the AutoConnect home path
A home path of AutoConnect is **/\_ac** by default. You can access from the browser with http://IPADDRESS/\_ac. You can change the home path by revising [**AUTOCONNECT_URI**](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDefs.h#L62) macro in the include header file as [AutoConnectDef.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDef.h).
A home path of AutoConnect is **/\_ac** by default. You can access from the browser with http://IPADDRESS/\_ac. You can change the home path by revising [**AUTOCONNECT_URI**](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDefs.h#L69) macro in the include header file as [AutoConnectDef.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDef.h).
@ -97,7 +97,7 @@ Specify the location to be redirected after module reset in the AutoConnect menu
<dt>**Type**</dt>
<dd>AC_ONBOOTURI_t</dd>
<dt>**Value**</dt>
<dd><spanclass="apidef">AC_ONBOOTURI_ROOT</span><spanclass="apidesc"></span><spanclass="apidef"> </span><spanclass="apidesc">Resetting the module redirects it to the AutoConnect root path. The root path is assumed to be AUTOCONNECT_URI defined in AutoConnectDefs.h.</span></dd>
<dd><spanclass="apidef">AC_ONBOOTURI_ROOT</span><spanclass="apidesc"></span><spanclass="apidef"> </span><spanclass="apidesc">Resetting the module redirects it to the AutoConnect root path. The root path is assumed to be AUTOCONNECT_URI defined in [`AutoConnectDefs.h`](api.md#defined-macros).</span></dd>
<dd><spanclass="apidef">AC_ONBOOTURI_HOME</span><spanclass="apidesc"></span><spanclass="apidef"> </span><spanclass="apidesc">It is redirected to the URI specified by [**AutoConnectConfig::homeUri**](apiconfig.md#homeuri).</span></dd>
</dl>
@ -291,7 +291,7 @@ Set flicker signal output according to WiFi connection status during AutoConnect
### <iclass="fa fa-caret-right"></i> tickerPort
Specifies the GPIO port number to output the flicker signal of the ticker. The default assumes on the board dependent definition LED_BUILTIN macro redefined by **AUTOCONNECT_TICKER_PORT** in `AutoConnectDefs.h`.
Specifies the GPIO port number to output the flicker signal of the ticker. The default assumes on the board dependent definition LED_BUILTIN macro redefined by **AUTOCONNECT_TICKER_PORT** in [`AutoConnectDefs.h`](api.md#defined-macros).
<dd><spanclass="apidef">host</span><spanclass="apidesc">Update server address. Specifies IP address or FQDN.</span></dd>
<dd><spanclass="apidef">port</span><spanclass="apidesc">Specifies HTTP port for the updating process. The default is defined as the **AUTOCONNECT_UPDATE_PORT** macro in the `AutoConnectDefs.h` header file.</span></dd>
<dd><spanclass="apidef">port</span><spanclass="apidesc">Specifies HTTP port for the updating process. The default is defined as the **AUTOCONNECT_UPDATE_PORT** macro in the [`AutoConnectDefs.h`](api.md#defined-macros) header file.</span></dd>
<dd><spanclass="apidef">uri</span><spanclass="apidesc">Specifies a URI on the update server that has deployed available binary sketch files.</span></dd>
<dd><spanclass="apidef">timeout</span><spanclass="apidesc">Specifies the maximum response time for the update server. The default is defined as the **AUTOCONNECT_UPDATE_TIMEOUT** macro in the `AutoConnectDefs.h` header file.</span></dt>
<dd><spanclass="apidef">timeout</span><spanclass="apidesc">Specifies the maximum response time for the update server. The default is defined as the **AUTOCONNECT_UPDATE_TIMEOUT** macro in the [`AutoConnectDefs.h`](api.md#defined-macros) header file.</span></dt>
<dd><spanclass="apidef">ledOn</span><spanclass="apidesc">Active signal to light the LED ticker during the update. Specifies **HIGH** or **LOW**</span></dt>
Sets the port and the ON signal level of the externally connected LED that should act as a ticker during the update process.
<dlclass="apidl">
<dt>**Parameter**</dt>
<dd><spanclass="apidef">ledPin</span><spanclass="apidesc">Specifies the PIN connected external LED for the ticker. The default is defined as the **AUTOCONNECT_TICKER_PORT** macro in the `AutoConnectDefs.h` header file and it is derived from the board-specific **LED_BUILTIN**. By default, the AutoConnectUpdate class does not use the ticker for boards without the LED_BUILTIN definition. If you connect the ticker LED externally, you need to specify the PIN using the [setLedPin](#setledpin) function.</span></dd>
<dd><spanclass="apidef">ledPin</span><spanclass="apidesc">Specifies the PIN connected external LED for the ticker. The default is defined as the **AUTOCONNECT_TICKER_PORT** macro in the [`AutoConnectDefs.h`](api.md#defined-macros) header file and it is derived from the board-specific **LED_BUILTIN**. By default, the AutoConnectUpdate class does not use the ticker for boards without the LED_BUILTIN definition. If you connect the ticker LED externally, you need to specify the PIN using the [setLedPin](#setledpin) function.</span></dd>
<dd><spanclass="apidef">ledOn</span><spanclass="apidesc">Specifies the the ON signal level of the LED PIN port. It is **HIGH** or **LOW**.</span></dd>
</dl>
@ -123,7 +123,7 @@ Update server address. Specifies IP address or FQDN.
HTTP port for the updating process.
<dlclass="apidl">
<dt>**Type**</dt>
<dd><spanclass="apidef">String</span><spanclass="apidesc">The default is defined as the **AUTOCONNECT_UPDATE_PORT** macro in the `AutoConnectDefs.h` header file.</span></dd>
<dd><spanclass="apidef">String</span><spanclass="apidesc">The default is defined as the **AUTOCONNECT_UPDATE_PORT** macro in the [`AutoConnectDefs.h`](api.md#defined-macros) header file.</span></dd>
@ -32,7 +32,7 @@ You can avoid a compile error in one of two ways:
1. Disable an AutoConnectUpdate feature if you don't need.
You can disable the AutoConnectUpdate feature by commenting out the **AUTOCONNECT_USE_UPDATE** macro in the `AutoConnectDefs.h` header file.
You can disable the AutoConnectUpdate feature by commenting out the [**AUTOCONNECT_USE_UPDATE**](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDefs.h#L34) macro in the [`AutoConnectDefs.h`](api.md#defined-macros) header file.
```cpp
#define AUTOCONNECT_USE_UPDATE
```
@ -137,7 +137,7 @@ You can use the [AutoConnect::onDetect](api.md#ondetect) exit routine. For more
## <iclass="fa fa-question-circle"></i> How change HTTP port?
HTTP port number is defined as a macro in [AutoConnectDefs.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDefs.h#L112) header file. You can change it directly with several editors and must re-compile.
HTTP port number is defined as a macro in [AutoConnectDefs.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDefs.h#L123) header file. You can change it directly with several editors and must re-compile.
Hieromon Ikasamo
5 years ago