You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
uClock/examples/AVRUartSlaveMidiClockMonitor/AVRUartSlaveMidiClockMonito...

155 lines
3.8 KiB

/* Uart MIDI Sync Slave Box Monitor
*
* This example demonstrates how to create a
* MIDI slave clock box with
* monitor support using oled display
*
* MIDI in must be provided via an opto-isolator to pin RX/D0
* Tested on an Arduino Uno.
*
* You need the following libraries to make it work
* - Midi Library
* - u8g2
* - uClock
* This example code is in the public domain.
*
* Code by midilab contact@midilab.co
* Example modified by Jackson Devices contact@jacksondevices.com
*/
#include <MIDI.h>
#include <U8x8lib.h>
//
// BPM Clock support
//
#include <uClock.h>
MIDI_CREATE_DEFAULT_INSTANCE();
U8X8 * u8x8;
// MIDI clock, start, stop, note on and note off byte definitions - based on MIDI 1.0 Standards.
#define MIDI_CLOCK 0xF8
#define MIDI_START 0xFA
#define MIDI_STOP 0xFC
float bpm = 126.0;
uint8_t bpm_blink_timer = 1;
uint8_t clock_state = 1;
uint8_t clock_mode = 0;
void handle_bpm_led(uint32_t tick) {
// BPM led indicator
if (!(tick % (96)) || (tick == 1)) { // first compass step will flash longer
bpm_blink_timer = 8;
digitalWrite(LED_BUILTIN, HIGH);
} else if (!(tick % (24))) { // each quarter led on
digitalWrite(LED_BUILTIN, HIGH);
} else if (!(tick % bpm_blink_timer)) { // get led off
digitalWrite(LED_BUILTIN, LOW);
bpm_blink_timer = 1;
}
}
// Internal clock handlers
void onSync24Callback(uint32_t tick) {
// Send MIDI_CLOCK to external gears
MIDI.sendRealTime(MIDI_CLOCK);
handle_bpm_led(tick);
}
void onClockStart() {
MIDI.sendRealTime(MIDI_START);
}
void onClockStop() {
MIDI.sendRealTime(MIDI_STOP);
digitalWrite(LED_BUILTIN, LOW);
}
// External clock handlers
void onExternalClock() {
uClock.clockMe();
}
void onExternalStart() {
uClock.start();
}
void onExternalStop() {
uClock.stop();
digitalWrite(LED_BUILTIN, LOW);
}
void setup() {
//
// MIDI setup
//
// Initiate MIDI communications, listen to all channels, disable soft MIDI thru
MIDI.begin();
MIDI.turnThruOff();
MIDI.setHandleClock(onExternalClock);
MIDI.setHandleStart(onExternalStart);
MIDI.setHandleStop(onExternalStop);
// An led to display MIDI reception
pinMode(LED_BUILTIN, OUTPUT);
digitalWrite(LED_BUILTIN, LOW);
//
// OLED setup
// Please check you oled model to correctly init him
// The complete list is available here: https://github.com/olikraus/u8g2/wiki/u8g2setupcpp
//
//u8x8 = new U8X8_SH1106_128X64_NONAME_HW_I2C(U8X8_PIN_NONE);
u8x8 = new U8X8_SSD1306_128X64_NONAME_HW_I2C(U8X8_PIN_NONE);
u8x8->begin();
u8x8->setFont(u8x8_font_pressstart2p_r);
u8x8->clear();
u8x8->setFlipMode(true);
u8x8->drawUTF8(0, 0, "uClock");
//
// uClock Setup
//
uClock.init();
uClock.setOnSync24(onSync24Callback);
// For MIDI Sync Start and Stop
uClock.setOnClockStart(onClockStart);
uClock.setOnClockStop(onClockStop);
uClock.setMode(uClock.EXTERNAL_CLOCK);
//uClock.setTempo(136.5);
//uClock.start();
}
void loop() {
while(MIDI.read()) {}
// DO NOT ADD MORE PROCESS HERE AT THE COST OF LOSING CLOCK SYNC
// Since arduino make use of Serial RX interruption we need to
// read Serial as fast as we can on the loop
if (bpm != uClock.getTempo()) {
bpm = uClock.getTempo();
u8x8->drawUTF8(8, 7, String(bpm, 1).c_str());
u8x8->drawUTF8(8 + 5, 7, "BPM");
// clear display ghost number for 2 digit
// coming from 3 digit bpm changes
if (bpm < 100) {
u8x8->drawUTF8(8 + 4, 7, " ");
}
}
if (clock_state != uClock.state) {
clock_state = uClock.state;
if (clock_state >= 1) {
u8x8->drawUTF8(0, 7, "Playing");
} else {
u8x8->drawUTF8(0, 7, "Stopped ");
}
}
if (clock_mode != uClock.getMode()) {
clock_mode = uClock.getMode();
if (clock_mode == uClock.EXTERNAL_CLOCK) {
u8x8->drawUTF8(10, 0, "Slave ");
} else {
u8x8->drawUTF8(10, 0, "Master");
}
}
}