diff --git a/examples/AVRUartSlaveMidiClockMonitor/AVRUartSlaveMidiClockMonitor.ino b/examples/AVRUartSlaveMidiClockMonitor/AVRUartSlaveMidiClockMonitor.ino
new file mode 100644
index 0000000..1b255f0
--- /dev/null
+++ b/examples/AVRUartSlaveMidiClockMonitor/AVRUartSlaveMidiClockMonitor.ino
@@ -0,0 +1,155 @@
+/* Uart MIDI Sync Slave Box Monitor
+ *  
+ * This example demonstrates how to create a
+ * MIDI slave clock box with 
+ * monitor support using oled display
+ * 
+ * MIDI in must be provided via an opto-isolator to pin RX/D0 
+ * Tested on an Arduino Uno.
+ *
+ * You need the following libraries to make it work
+ * - Midi Library
+ * - u8g2
+ * - uClock
+ * This example code is in the public domain.
+ *
+ * Code by midilab contact@midilab.co
+ * Example modified by Jackson Devices contact@jacksondevices.com
+ */
+#include <MIDI.h>
+#include <U8x8lib.h>
+
+//
+// BPM Clock support
+//
+#include <uClock.h>
+
+MIDI_CREATE_DEFAULT_INSTANCE();
+U8X8 * u8x8;
+
+// MIDI clock, start, stop, note on and note off byte definitions - based on MIDI 1.0 Standards.
+#define MIDI_CLOCK 0xF8
+#define MIDI_START 0xFA
+#define MIDI_STOP  0xFC
+
+float bpm = 126.0;
+uint8_t bpm_blink_timer = 1;
+uint8_t clock_state = 1;
+uint8_t clock_mode = 0;
+
+void handle_bpm_led(uint32_t tick) {
+  // BPM led indicator
+  if (!(tick % (96)) || (tick == 1)) {  // first compass step will flash longer
+    bpm_blink_timer = 8;
+    digitalWrite(LED_BUILTIN, HIGH);
+  } else if (!(tick % (24))) {  // each quarter led on
+    digitalWrite(LED_BUILTIN, HIGH);
+  } else if (!(tick % bpm_blink_timer)) {  // get led off
+    digitalWrite(LED_BUILTIN, LOW);
+    bpm_blink_timer = 1;
+  }
+}
+
+// Internal clock handlers
+void ClockOut96PPQN(uint32_t tick) {
+  // Send MIDI_CLOCK to external gears
+  MIDI.sendRealTime(MIDI_CLOCK);
+  handle_bpm_led(tick);
+}
+
+void onClockStart() {
+  MIDI.sendRealTime(MIDI_START);
+}
+
+void onClockStop() {
+  MIDI.sendRealTime(MIDI_STOP);
+  digitalWrite(LED_BUILTIN, LOW);
+}
+
+// External clock handlers
+void onExternalClock() {
+  uClock.clockMe();
+}
+
+void onExternalStart() {
+  uClock.start();
+}
+
+void onExternalStop() {
+  uClock.stop();
+  digitalWrite(LED_BUILTIN, LOW);
+}
+
+void setup() {
+  //
+  // MIDI setup
+  //
+  // Initiate MIDI communications, listen to all channels, disable soft MIDI thru
+  MIDI.begin();
+  MIDI.turnThruOff();
+MIDI.setHandleClock(onExternalClock);
+  MIDI.setHandleStart(onExternalStart);
+  MIDI.setHandleStop(onExternalStop);
+
+  // An led to display MIDI reception
+  pinMode(LED_BUILTIN, OUTPUT);
+  digitalWrite(LED_BUILTIN, LOW);
+
+  //
+  // OLED setup
+  // Please check you oled model to correctly init him
+// The complete list is available here: https://github.com/olikraus/u8g2/wiki/u8g2setupcpp
+  //
+  //u8x8 = new U8X8_SH1106_128X64_NONAME_HW_I2C(U8X8_PIN_NONE);
+  u8x8 = new U8X8_SSD1306_128X64_NONAME_HW_I2C(U8X8_PIN_NONE);
+  u8x8->begin();
+  u8x8->setFont(u8x8_font_pressstart2p_r); 
+  u8x8->clear();
+  u8x8->setFlipMode(true);
+  u8x8->drawUTF8(0, 0, "uClock"); 
+
+  //
+  // uClock Setup
+  //
+  uClock.init();
+  uClock.setClock96PPQNOutput(ClockOut96PPQN);
+  // For MIDI Sync Start and Stop
+  uClock.setOnClockStartOutput(onClockStart);
+  uClock.setOnClockStopOutput(onClockStop);
+  uClock.setMode(uClock.EXTERNAL_CLOCK);
+  //uClock.setTempo(136.5);
+  //uClock.start();
+}
+
+void loop() {
+  while(MIDI.read()) {}
+  // DO NOT ADD MORE PROCESS HERE AT THE COST OF LOSING CLOCK SYNC
+  // Since arduino make use of Serial RX interruption we need to 
+  // read Serial as fast as we can on the loop
+  if (bpm != uClock.getTempo()) {
+    bpm = uClock.getTempo();
+    u8x8->drawUTF8(8, 7, String(bpm, 1).c_str());
+    u8x8->drawUTF8(8 + 5, 7, "BPM");
+    // clear display ghost number for 2 digit
+    // coming from 3 digit bpm changes
+    if (bpm < 100) {
+      u8x8->drawUTF8(8 + 4, 7, " ");
+    }
+  }
+  if (clock_state != uClock.state) {
+    clock_state = uClock.state;
+    if (clock_state >= 1) {
+      u8x8->drawUTF8(0, 7, "Playing");
+    } else {
+      u8x8->drawUTF8(0, 7, "Stopped ");
+    }
+  }
+  if (clock_mode != uClock.getMode()) {
+    clock_mode = uClock.getMode();
+    if (clock_mode == uClock.EXTERNAL_CLOCK) {
+      u8x8->drawUTF8(10, 0, "Slave ");
+    } else {
+      u8x8->drawUTF8(10, 0, "Master");
+    }
+  }
+}