mirror of https://github.com/jeelabs/esp-link.git
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
137 lines
4.4 KiB
137 lines
4.4 KiB
// Copyright 2015 by Thorsten von Eicken, see LICENSE.txt
|
|
/* Configuration stored in flash */
|
|
|
|
#include <esp8266.h>
|
|
#include <osapi.h>
|
|
#include "config.h"
|
|
#include "espfs.h"
|
|
|
|
// hack: this from LwIP
|
|
extern uint16_t inet_chksum(void *dataptr, uint16_t len);
|
|
|
|
FlashConfig flashConfig;
|
|
FlashConfig flashDefault = {
|
|
33, 0, 0,
|
|
MCU_RESET_PIN, MCU_ISP_PIN, LED_CONN_PIN, LED_SERIAL_PIN,
|
|
115200,
|
|
"esp-link\0 ", // hostname
|
|
0, 0x00ffffff, 0, // static ip, netmask, gateway
|
|
0, // log mode
|
|
0, // swap uart (don't by default)
|
|
};
|
|
|
|
typedef union {
|
|
FlashConfig fc;
|
|
uint8_t block[128];
|
|
} FlashFull;
|
|
|
|
// magic number to recognize thet these are our flash settings as opposed to some random stuff
|
|
#define FLASH_MAGIC (0xaa55)
|
|
|
|
// size of the setting sector
|
|
#define FLASH_SECT (4096)
|
|
|
|
// address where to flash the settings: there are 16KB of reserved space at the end of the first
|
|
// flash partition, we use the upper 8KB (2 sectors)
|
|
#define FLASH_ADDR (FLASH_SECT + FIRMWARE_SIZE + 2*FLASH_SECT)
|
|
|
|
static int flash_pri; // primary flash sector (0 or 1, or -1 for error)
|
|
|
|
#if 0
|
|
static void memDump(void *addr, int len) {
|
|
for (int i=0; i<len; i++) {
|
|
os_printf("0x%02x", ((uint8_t *)addr)[i]);
|
|
}
|
|
os_printf("\n");
|
|
}
|
|
#endif
|
|
|
|
bool ICACHE_FLASH_ATTR configSave(void) {
|
|
FlashFull ff;
|
|
memset(&ff, 0, sizeof(ff));
|
|
memcpy(&ff, &flashConfig, sizeof(FlashConfig));
|
|
uint32_t seq = ff.fc.seq+1;
|
|
// erase secondary
|
|
uint32_t addr = FLASH_ADDR + (1-flash_pri)*FLASH_SECT;
|
|
if (spi_flash_erase_sector(addr>>12) != SPI_FLASH_RESULT_OK)
|
|
goto fail; // no harm done, give up
|
|
// calculate CRC
|
|
ff.fc.seq = seq;
|
|
ff.fc.magic = FLASH_MAGIC;
|
|
ff.fc.crc = 0;
|
|
//os_printf("cksum of: ");
|
|
//memDump(&ff, sizeof(ff));
|
|
ff.fc.crc = inet_chksum(&ff, sizeof(ff));
|
|
//os_printf("cksum is %04x\n", ff.fc.crc);
|
|
// write primary with incorrect seq
|
|
ff.fc.seq = 0xffffffff;
|
|
if (spi_flash_write(addr, (void *)&ff, sizeof(ff)) != SPI_FLASH_RESULT_OK)
|
|
goto fail; // no harm done, give up
|
|
// fill in correct seq
|
|
ff.fc.seq = seq;
|
|
if (spi_flash_write(addr, (void *)&ff, sizeof(uint32_t)) != SPI_FLASH_RESULT_OK)
|
|
goto fail; // most likely failed, but no harm if successful
|
|
// now that we have safely written the new version, erase old primary
|
|
addr = FLASH_ADDR + flash_pri*FLASH_SECT;
|
|
flash_pri = 1-flash_pri;
|
|
if (spi_flash_erase_sector(addr>>12) != SPI_FLASH_RESULT_OK)
|
|
return true; // no back-up but we're OK
|
|
// write secondary
|
|
ff.fc.seq = 0xffffffff;
|
|
if (spi_flash_write(addr, (void *)&ff, sizeof(ff)) != SPI_FLASH_RESULT_OK)
|
|
return true; // no back-up but we're OK
|
|
ff.fc.seq = seq;
|
|
spi_flash_write(addr, (void *)&ff, sizeof(uint32_t));
|
|
return true;
|
|
fail:
|
|
os_printf("*** Failed to save config ***\n");
|
|
return false;
|
|
}
|
|
|
|
void ICACHE_FLASH_ATTR configWipe(void) {
|
|
spi_flash_erase_sector(FLASH_ADDR>>12);
|
|
spi_flash_erase_sector((FLASH_ADDR+FLASH_SECT)>>12);
|
|
}
|
|
|
|
static int ICACHE_FLASH_ATTR selectPrimary(FlashFull *fc0, FlashFull *fc1);
|
|
|
|
bool ICACHE_FLASH_ATTR configRestore(void) {
|
|
FlashFull ff0, ff1;
|
|
// read both flash sectors
|
|
if (spi_flash_read(FLASH_ADDR, (void *)&ff0, sizeof(ff0)) != SPI_FLASH_RESULT_OK)
|
|
memset(&ff0, 0, sizeof(ff0)); // clear in case of error
|
|
if (spi_flash_read(FLASH_ADDR+FLASH_SECT, (void *)&ff1, sizeof(ff1)) != SPI_FLASH_RESULT_OK)
|
|
memset(&ff1, 0, sizeof(ff1)); // clear in case of error
|
|
// figure out which one is good
|
|
flash_pri = selectPrimary(&ff0, &ff1);
|
|
// if neither is OK, we revert to defaults
|
|
if (flash_pri < 0) {
|
|
memcpy(&flashConfig, &flashDefault, sizeof(FlashConfig));
|
|
flash_pri = 0;
|
|
return false;
|
|
}
|
|
// copy good one into global var and return
|
|
memcpy(&flashConfig, flash_pri == 0 ? &ff0.fc : &ff1.fc, sizeof(FlashConfig));
|
|
return true;
|
|
}
|
|
|
|
static int ICACHE_FLASH_ATTR selectPrimary(FlashFull *ff0, FlashFull *ff1) {
|
|
// check CRC of ff0
|
|
uint16_t crc = ff0->fc.crc;
|
|
ff0->fc.crc = 0;
|
|
bool ff0_crc_ok = inet_chksum(ff0, sizeof(FlashFull)) == crc;
|
|
|
|
// check CRC of ff1
|
|
crc = ff1->fc.crc;
|
|
ff1->fc.crc = 0;
|
|
bool ff1_crc_ok = inet_chksum(ff1, sizeof(FlashFull)) == crc;
|
|
|
|
// decided which we like better
|
|
if (ff0_crc_ok)
|
|
if (!ff1_crc_ok || ff0->fc.seq >= ff1->fc.seq)
|
|
return 0; // use first sector as primary
|
|
else
|
|
return 1; // second sector is newer
|
|
else
|
|
return ff1_crc_ok ? 1 : -1;
|
|
}
|
|
|