# --------------- esphttpd config options --------------- # If GZIP_COMPRESSION is set to "yes" then the static css, js, and html files will be compressed with gzip before added to the espfs image # and will be served with gzip Content-Encoding header. # This could speed up the downloading of these files, but might break compatibility with older web browsers not supporting gzip encoding # because Accept-Encoding is simply ignored. Enable this option if you have large static files to serve (for e.g. JQuery, Twitter bootstrap) # By default only js, css and html files are compressed. # If you have text based static files with different extensions what you want to serve compressed then you will need to add the extension to the following places: # - Add the extension to this Makefile at the webpages.espfs target to the find command # - Add the extension to the gzippedFileTypes array in the user/httpd.c file # # Adding JPG or PNG files (and any other compressed formats) is not recommended, because GZIP compression does not works effectively on compressed files. #Static gzipping is disabled by default. GZIP_COMPRESSION ?= no # If COMPRESS_W_YUI is set to "yes" then the static css and js files will be compressed with yui-compressor # This option works only when GZIP_COMPRESSION is set to "yes" # http://yui.github.io/yuicompressor/ #Disabled by default. COMPRESS_W_YUI ?= no YUI-COMPRESSOR ?= /usr/bin/yui-compressor #If USE_HEATSHRINK is set to "yes" then the espfs files will be compressed with Heatshrink and decompressed #on the fly while reading the file. Because the decompression is done in the esp8266, it does not require #any support in the browser. USE_HEATSHRINK ?= yes # -------------- End of esphttpd config options ------------- # Output directors to store intermediate compiled files # relative to the project directory BUILD_BASE = build FW_BASE = firmware # Base directory for the compiler. Needs a / at the end; if not set it'll use the tools that are in # the PATH. XTENSA_TOOLS_ROOT ?= # base directory of the ESP8266 SDK package, absolute SDK_BASE ?= /opt/Espressif/ESP8266_SDK #Esptool.py path and port ESPTOOL ?= esptool.py ESPPORT ?= /dev/ttyUSB0 #ESPDELAY indicates seconds to wait between flashing the two binary images ESPDELAY ?= 3 ESPBAUD ?= 460800 # name for the target project TARGET = httpd # espressif tool to concatenate sections for OTA upload using bootloader v1.2+ APPGEN_TOOL ?= gen_appbin.py ESP_SPI_SIZE ?= 0 # 0->512KB ESP_FLASH_MODE ?= 0 # 0->QIO ESP_FLASH_FREQ_DIV ?= 0 # 0->40Mhz # which modules (subdirectories) of the project to include in compiling #MODULES = driver user lwip/api lwip/app lwip/core lwip/core/ipv4 lwip/netif MODULES = espfs httpd user EXTRA_INCDIR = include \ . \ lib/heatshrink/ # libraries used in this project, mainly provided by the SDK LIBS = c gcc hal phy pp net80211 wpa main lwip # compiler flags using during compilation of source files CFLAGS = -Os -ggdb -std=c99 -Werror -Wpointer-arith -Wundef -Wall -Wl,-EL -fno-inline-functions \ -nostdlib -mlongcalls -mtext-section-literals -D__ets__ -DICACHE_FLASH -D_STDINT_H \ -Wno-address -DESPFS_POS=$(ESPFS_POS) -DESPFS_SIZE=$(ESPFS_SIZE) # linker flags used to generate the main object file LDFLAGS = -nostdlib -Wl,--no-check-sections -u call_user_start -Wl,-static # linker script used for the above linker step LD_SCRIPT := build/eagle.esphttpd.v6.ld LD_SCRIPT1 := build/eagle.esphttpd1.v6.ld LD_SCRIPT2 := build/eagle.esphttpd2.v6.ld # various paths from the SDK used in this project SDK_LIBDIR = lib SDK_LDDIR = ld SDK_INCDIR = include include/json SDK_TOOLSDIR = tools # select which tools to use as compiler, librarian and linker CC := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-gcc AR := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-ar LD := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-gcc OBJCP := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-objcopy OBJDP := $(XTENSA_TOOLS_ROOT)xtensa-lx106-elf-objdump #### #### no user configurable options below here #### SRC_DIR := $(MODULES) BUILD_DIR := $(addprefix $(BUILD_BASE)/,$(MODULES)) SDK_LIBDIR := $(addprefix $(SDK_BASE)/,$(SDK_LIBDIR)) SDK_LDDIR := $(addprefix $(SDK_BASE)/,$(SDK_LDDIR)) SDK_INCDIR := $(addprefix -I$(SDK_BASE)/,$(SDK_INCDIR)) SDK_TOOLS := $(addprefix $(SDK_BASE)/,$(SDK_TOOLSDIR)) APPGEN_TOOL := $(addprefix $(SDK_TOOLS)/,$(APPGEN_TOOL)) SRC := $(foreach sdir,$(SRC_DIR),$(wildcard $(sdir)/*.c)) OBJ := $(patsubst %.c,$(BUILD_BASE)/%.o,$(SRC)) $(BUILD_BASE)/espfs_img.o LIBS := $(addprefix -l,$(LIBS)) APP_AR := $(addprefix $(BUILD_BASE)/,$(TARGET)_app.a) TARGET_OUT := $(addprefix $(BUILD_BASE)/,$(TARGET).out) USER1_OUT := $(addprefix $(BUILD_BASE)/,$(TARGET).user1.out) USER2_OUT := $(addprefix $(BUILD_BASE)/,$(TARGET).user2.out) INCDIR := $(addprefix -I,$(SRC_DIR)) EXTRA_INCDIR := $(addprefix -I,$(EXTRA_INCDIR)) MODULE_INCDIR := $(addsuffix /include,$(INCDIR)) V ?= $(VERBOSE) ifeq ("$(V)","1") Q := vecho := @true else Q := @ vecho := @echo endif ifeq ("$(GZIP_COMPRESSION)","yes") CFLAGS += -DGZIP_COMPRESSION endif ifeq ("$(USE_HEATSHRINK)","yes") CFLAGS += -DESPFS_HEATSHRINK endif vpath %.c $(SRC_DIR) define compile-objects $1/%.o: %.c $(vecho) "CC $$<" $(Q) $(CC) $(INCDIR) $(MODULE_INCDIR) $(EXTRA_INCDIR) $(SDK_INCDIR) $(CFLAGS) -c $$< -o $$@ endef .PHONY: all checkdirs clean webpages.espfs all: checkdirs $(FW_BASE) firmware/user1.bin firmware/user2.bin $(TARGET_OUT): $(APP_AR) $(LD_SCRIPT) $(vecho) "LD $@" $(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@ $(OBJDP) -x $(TARGET_OUT) | egrep '(espfs_img)' $(USER1_OUT): $(APP_AR) $(LD_SCRIPT1) $(vecho) "LD $@" $(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT1) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@ # $(Q) $(OBJDP) -x $(TARGET_OUT) | egrep espfs_img $(USER2_OUT): $(APP_AR) $(LD_SCRIPT2) $(vecho) "LD $@" $(Q) $(LD) -L$(SDK_LIBDIR) -T$(LD_SCRIPT2) $(LDFLAGS) -Wl,--start-group $(LIBS) $(APP_AR) -Wl,--end-group -o $@ # $(Q) $(OBJDP) -x $(TARGET_OUT) | egrep espfs_img $(FW_BASE): $(TARGET_OUT) $(vecho) "FW $@" $(Q) mkdir -p $@ $(Q) $(ESPTOOL) elf2image $(TARGET_OUT) --output $@/ firmware/user1.bin: $(USER1_OUT) $(Q) $(OBJCP) --only-section .text -O binary $(USER1_OUT) eagle.app.v6.text.bin $(Q) $(OBJCP) --only-section .data -O binary $(USER1_OUT) eagle.app.v6.data.bin $(Q) $(OBJCP) --only-section .rodata -O binary $(USER1_OUT) eagle.app.v6.rodata.bin $(Q) $(OBJCP) --only-section .irom0.text -O binary $(USER1_OUT) eagle.app.v6.irom0text.bin ls -ls eagle*bin $(Q) COMPILE=gcc PATH=$(XTENSA_TOOLS_ROOT):$(PATH) python $(APPGEN_TOOL) $(USER1_OUT) 2 $(ESP_FLASH_MODE) $(ESP_FLASH_FREQ_DIV) $(ESP_SPI_SIZE) $(Q) rm -f eagle.app.v6.*.bin $(Q) mv eagle.app.flash.bin $@ firmware/user2.bin: $(USER1_OUT) $(Q) $(OBJCP) --only-section .text -O binary $(USER2_OUT) eagle.app.v6.text.bin $(Q) $(OBJCP) --only-section .data -O binary $(USER2_OUT) eagle.app.v6.data.bin $(Q) $(OBJCP) --only-section .rodata -O binary $(USER2_OUT) eagle.app.v6.rodata.bin $(Q) $(OBJCP) --only-section .irom0.text -O binary $(USER2_OUT) eagle.app.v6.irom0text.bin ls -ls eagle*bin $(Q) COMPILE=gcc PATH=$(XTENSA_TOOLS_ROOT):$(PATH) python $(APPGEN_TOOL) $(USER2_OUT) 2 $(ESP_FLASH_MODE) $(ESP_FLASH_FREQ_DIV) $(ESP_SPI_SIZE) $(Q) rm -f eagle.app.v6.*.bin $(Q) mv eagle.app.flash.bin $@ $(APP_AR): $(OBJ) $(vecho) "AR $@" $(Q) $(AR) cru $@ $^ checkdirs: $(BUILD_DIR) $(BUILD_DIR): $(Q) mkdir -p $@ flash: $(TARGET_OUT) $(FW_BASE) $(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash 0x00000 $(FW_BASE)/0x00000.bin 0x40000 $(FW_BASE)/0x40000.bin $(BUILD_BASE)/espfs_img.o: html/ html/wifi/ espfs/mkespfsimage/mkespfsimage ifeq ("$(COMPRESS_W_YUI)","yes") $(Q) rm -rf html_compressed; $(Q) cp -r html html_compressed; $(Q) echo "Compression assets with yui-compressor. This may take a while..." $(Q) for file in `find html_compressed -type f -name "*.js"`; do $(YUI-COMPRESSOR) --type js $$file -o $$file; done $(Q) for file in `find html_compressed -type f -name "*.css"`; do $(YUI-COMPRESSOR) --type css $$file -o $$file; done $(Q) awk "BEGIN {printf \"YUI compression ratio was: %.2f%%\\n\", (`du -b -s html_compressed/ | sed 's/\([0-9]*\).*/\1/'`/`du -b -s html/ | sed 's/\([0-9]*\).*/\1/'`)*100}" # mkespfsimage will compress html, css and js files with gzip by default if enabled # override with -g cmdline parameter $(Q) cd html_compressed; find | ../espfs/mkespfsimage/mkespfsimage > ../build/espfs.img; cd ..; else $(Q) cd html; find . \! -name \*- | ../espfs/mkespfsimage/mkespfsimage > ../build/espfs.img; cd .. endif $(Q) cd build; $(OBJCP) -I binary -O elf32-xtensa-le -B xtensa --rename-section .data=.espfs \ espfs.img espfs_img.o; cd .. # edit the loader script to add the espfs section to the end of irom with a 4KB alignment to # allow the section to be reflashed at runtime, if you run tight in space you could change the # alignment to 4 and forego the reflash capability # we also adjust the sizes of the segments 'cause we need more irom0 build/eagle.esphttpd.v6.ld: $(SDK_LDDIR)/eagle.app.v6.ld sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4096);' -e 'a *(.espfs)' -e '}' \ $(SDK_LDDIR)/eagle.app.v6.ld >$@ build/eagle.esphttpd1.v6.ld: $(SDK_LDDIR)/eagle.app.v6.new.512.app1.ld sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4096);' -e 'a *(.espfs)' -e '}' \ -e '/^ irom0_0_seg/ s/2B000/32000/' \ $(SDK_LDDIR)/eagle.app.v6.new.512.app1.ld >$@ build/eagle.esphttpd2.v6.ld: $(SDK_LDDIR)/eagle.app.v6.new.512.app2.ld sed -e '/\.irom\.text/{' -e 'a . = ALIGN (4096);' -e 'a *(.espfs)' -e '}' \ -e '/^ irom0_0_seg/ s/2B000/32000/' \ $(SDK_LDDIR)/eagle.app.v6.new.512.app2.ld >$@ blankflash: $(Q) $(ESPTOOL) --port $(ESPPORT) --baud $(ESPBAUD) write_flash 0x7E000 $(SDK_BASE)/bin/blank.bin espfs/mkespfsimage/mkespfsimage: espfs/mkespfsimage/ $(Q) $(MAKE) -C espfs/mkespfsimage USE_HEATSHRINK="$(USE_HEATSHRINK)" GZIP_COMPRESSION="$(GZIP_COMPRESSION)" clean: $(Q) rm -f $(APP_AR) $(Q) rm -f $(TARGET_OUT) $(Q) find $(BUILD_BASE) -type f | xargs rm -f $(Q) make -C espfs/mkespfsimage/ clean $(Q) rm -rf $(FW_BASE) $(Q) rm -f webpages.espfs ifeq ("$(COMPRESS_W_YUI)","yes") $(Q) rm -rf html_compressed endif $(foreach bdir,$(BUILD_DIR),$(eval $(call compile-objects,$(bdir))))