// Copyright 2015 by Thorsten von Eicken, see LICENSE.txt

#include <esp8266.h>
#include <config.h>
#include <serled.h>

static ETSTimer serledTimer;

static void ICACHE_FLASH_ATTR setSerled(int on) {
  int8_t pin = flashConfig.ser_led_pin;
  if (pin < 0) return; // disabled
  // LED is active-low
  if (on) {
    gpio_output_set(0, (1<<pin), (1<<pin), 0);
  } else {
    gpio_output_set((1<<pin), 0, (1<<pin), 0);
  }
}

static void ICACHE_FLASH_ATTR serledTimerCb(void *v) {
  setSerled(0);
}

void ICACHE_FLASH_ATTR serledFlash(int duration) {
  setSerled(1);
  os_timer_disarm(&serledTimer);
  os_timer_setfn(&serledTimer, serledTimerCb, NULL);
  os_timer_arm(&serledTimer, duration, 0);
}

void ICACHE_FLASH_ATTR serledInit(void) {
  return;
  int8_t pin = flashConfig.ser_led_pin;
  if (pin >= 0) {
    makeGpio(pin);
    gpio_output_set(0, 0, (1<<pin), 0);
    serledFlash(1000); // turn it on for 1 second
  }
#ifdef SERLED_DBG
	os_printf("SER led=%d\n", pin);
#endif
}

// Make a pin be GPIO, i.e. set the mux so the pin has the gpio function
void ICACHE_FLASH_ATTR makeGpio(uint8_t pin) {
  uint32_t addr;
  uint8_t func = 3;
  switch (pin) {
  case 0:
    addr = PERIPHS_IO_MUX_GPIO0_U;
    func = 0;
    break;
  case 1:
    addr = PERIPHS_IO_MUX_U0TXD_U;
    break;
  case 2:
    addr = PERIPHS_IO_MUX_GPIO2_U;
    func = 0;
    break;
  case 3:
    addr = PERIPHS_IO_MUX_U0RXD_U;
    break;
  case 4:
    addr = PERIPHS_IO_MUX_GPIO4_U;
    func = 0;
    break;
  case 5:
    addr = PERIPHS_IO_MUX_GPIO5_U;
    func = 0;
    break;
  case 6:
  case 7:
  case 8:
  case 9:
  case 10:
  case 11:
    addr = PERIPHS_IO_MUX_SD_CMD_U - 4 * (11-pin);
    break;
  case 12:
  case 13:
  case 14:
  case 15:
    addr = PERIPHS_IO_MUX_MTDO_U - 4 * (15-pin);
    break;
  default:
    return;
  }
  PIN_FUNC_SELECT(addr, func);
}