Add note on flash mode

Some modules require the flash mode to be `dio`, otherwise the module won't boot. I didn't know that at first and was wondering why my new ESP-12F module wouldn't boot. Maybe that is one reason why people are reporting none booting modules recently?
6 years ago · 3036a1f4cc
parent cba426021d
commit 3036a1f4cc
1 changed files with 1 additions and 1 deletions
--- a/FLASHING.md
+++ b/FLASHING.md
@ -83,7 +83,7 @@ esptool.py --port /dev/ttyUSB0 --baud 230400 write_flash -fs 32m -ff 80m \
    0x00000 boot_v1.5.bin 0x1000 user1.bin \
    0x3FC000 esp_init_data_default.bin 0x3FE000 blank.bin
 ```
-I use a high baud rate as shown above because I'm impatient, but that's not required.
+I use a high baud rate as shown above because I'm impatient, but that's not required. Attention: For some modules you have to set the flash mode to `dio` by adding `--fm dio` to the command line above, otherwise they won't boot. 

 ### 4Mbit / 512Kbyte module
 ```