From 1c761abaf7962eb77b0efe7a12f3110e13fbd0c9 Mon Sep 17 00:00:00 2001 From: Thorsten von Eicken Date: Sat, 29 Aug 2015 13:38:07 -0700 Subject: [PATCH] update readme for v2.0.beta2 --- README.md | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-) diff --git a/README.md b/README.md index e7898ae..34d3090 100644 --- a/README.md +++ b/README.md @@ -7,16 +7,24 @@ It implements a number of features: - flash-programming attached Arduino/AVR microcontrollers as well as LPC800-series and other ARM microcontrollers via Wifi - outbound TCP (and thus HTTP) connections from the attached micro-controller to the internet +- outbound REST HTTP requests from the attached micro-controller to the internet, protocol + based on espduino and compatible with [tuanpmt/espduino](https://github.com/tuanpmt/espduino) The firmware includes a tiny HTTP server based on [esphttpd](http://www.esp8266.com/viewforum.php?f=34) with a simple web interface, many thanks to Jeroen Domburg for making it available! +Many thanks to https://github.com/brunnels for contributions around the espduino functionality. -[![Chat at https://gitter.im/jeelabs/esp-link](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/jeelabs/esp-link?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge) +###[Releases](https://github.com/jeelabs/esp-link/releases) + +- [V2.0.beta2](https://github.com/jeelabs/esp-link/releases/tag/v2.0.beta2) has REST support but + requires a 1MByte or 4MByte ESP8266 flash, e.g. esp-12 or wroom-02 +- [V1.0.1](https://github.com/jeelabs/esp-link/releases/tag/v1.0.1) is _stable_ + and has the web server, transparent bridge, flash-programming support, but lacks + the REST and upcoming MQTT support. V1 works with 512KB flash, e.g. esp-1, esp-3, ... -###[Latest release](https://github.com/jeelabs/esp-link/releases) -Note that the [stable V1.0 release](https://github.com/jeelabs/esp-link/releases/tag/v1.0.0) is -recommended if you do not need the outbound TCP connections and have a 512KB flash chip. +For quick support and questions: +[![Chat at https://gitter.im/jeelabs/esp-link](https://badges.gitter.im/Join%20Chat.svg)](https://gitter.im/jeelabs/esp-link?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge) Eye Candy --------- @@ -31,7 +39,7 @@ attached microcontroller, and the pin assignments card: Hardware info ------------- This firmware is designed for esp8266 modules which have most ESP I/O pins available and -512KB flash. +at least 1MB flash. (The V1 firmware supports modules with 512KB flash). The default connections are: - URXD: connect to TX of microcontroller - UTXD: connect to RX of microcontroller @@ -42,6 +50,9 @@ The default connections are: If you are using an FTDI connector, GPIO12 goes to DTR and GPIO13 goes to CTS. +If you are using an esp-12 module, you can avoid the initial boot message from the esp8266 +bootloader by using the swap-pins option. This swaps the esp8266 TX/RX to gpio15/gpio13 respectively. + The GPIO pin assignments can be changed dynamically in the web UI and are saved in flash. Initial flashing