## Open Theremin V3 with MIDI interface control software for Arduino UNO Based on Arduino UNO Software for the Open.Theremin version 3.0 Copyright (C) 2010-2016 by Urs Gaudenz https://github.com/GaudiLabs/OpenTheremin_V3 Urs makes also a very clear presentation of this MIDI feature on his website (many thanks !): http://www.gaudi.ch/OpenTheremin/index.php?option=com_content&view=article&id=200&Itemid=121 ### Don't click on the files! Click on the "clone or download" Button to the right. Then unpack the archive. ### Open Source Theremin based on the Arduino Platform Open.Theremin is an arduino shield to build the legendary music instrument invented by Leon Theremin back in 1920. The theremin is played with two antennas, one to control the pitch and one for volume. The electronic shield with two ports to connect those antennas comprises two heterodyne oscillators to measure the distance of the hand to the antenna when playing the instrument. The resulting signal is fed into the arduino. After linearization and filtering the arduino generates the instruments sound that is then played through a high quality digital analog audio converter on the board. The characteristics of the sound can be determined by a wave table on the arduino. For more info on the open source project and on availability of ready made shield see: http://www.gaudi.ch/OpenTheremin/ ### Installation 1. Open up the Arduino IDE 2. Open the File "Open_Theremin_V3.ino" 3. In "Application.cpp", take care of selecting MIDI mode that correponds to your cituation (put "//" in front off inadequate line - MIDI through serial is selected by default here): Serial.begin(115200); // Baudrate for midi to serial. Use a serial to midi router http://projectgus.github.com/hairless-midiserial/ //Serial.begin(31250); // Baudrate for real midi. Use din connection https://www.arduino.cc/en/Tutorial/Midi or HIDUINO https://github.com/ddiakopoulos/hiduino I tested "Hiduino" and "MIDI to serial" modes, both are OK. 4. Selecting the correct usb port on Tools -> Serial Port 5. Select the correct arduino board from Tools -> Board 6. Upload the code by clicking on the upload button. ### Added and removed compare to Open Theremin V3. Serial communication implemented for program monitoring purpose was removed (Particularly during calibration). If you need to monitor calibration for antenna problem fixing, please use original master branch from https://github.com/GaudiLabs/OpenTheremin_V3. Serial port is used to send MIDI messages now. ### How does it work ? PITCH ANTENNA (ROD): It uses first note detected as hand moves away from from volume loop antenna to generate a NOTE ON. Then it can use PITCH BEND messages (if activated) to reach exact pitch as long as pitch bend range will do. Beyond it can generate a new NOTE ON followed by a NOTE OFF for the previous note if legato mode activated. Pitch bend range can be configured (1, 2, 7, 12 or 24 semitones) to align with synth's maximum capabilities. It can also generate a MIDI Continuous Controler (MIDI CC) changes if one is selected. VOLUME ANTENNA (LOOP): It generates selected MIDI Continuous Controler (MIDI CC) changes, starting NOTE ON and ending NOTE OFF (when playing staccato). The volume trigger can be configured so as we have some volume at note attack on percussive sounds. The volume trigger setting is also used to set sensitivity for velocity (how fast volume loop hand is moving when note is triggered). Matter of fact, the higher is this setting, less margin we have for volume variation. It is compensated by increase of velocity sensitivity. CALIBRATION: This device runs normal calibration of antennas after pushing button for 3 seconds as per initial project SETTINGS: "Register" pot becomes "Selected Parameter" pot and have 8 positions. "Timbre" pot becomes "Parameter's Value" and have a variable number of positions depending on selected parameter: 1. Register: 4 positions as in original Open Theremin V3 2. Timbre: 8 positions as in original Open Theremin V3 3. Channel: 16 positions (channel 1 to 16) 4. Rod antenna mode: 4 positions (Legato off/Pitch Bend off, Legato off/Pitch Bend on, Legato on/Pitch Bend off, Legato on/Pitch Bend on) 5. Pitch bend range: 5 positions (1, 2, 7, 12, 24 Semitones). For classical glissando and in order to have same note on audio and MIDI, use exactly same pitch bend range on your synth. Maximum setting possible is recomended. 6. Volume trigger / Velocity sensitivity (how fast moves the volume loop's hand): 128 positions (0 to 127) 7. Rod antenna MIDI CC: 5 positions (None, 8-Balance, 10-Pan, 16-Ribbon controler, 74-cutoff) 8. Loop antenna MIDI CC: 8 positions (1-Modulation, 7-Volume, 11-Expression, 71-Resonnance, 74-Cutoff, 91-Reverb, 93-Chorus, 95-Phaser) Select a Parameter and move "Parameter's Value" to change corresponding setting. Manipulation of "Rod antenna MIDI CC" and "Loop antenna MIDI CC" is not error proof. MIDI newbies should be advised to change their value in MUTE mode. Volume trigger = 127 (Maximum) won't generate any NOTE ON. It can be used to generate MIDI CC only. Default configuration is: Register = Lowest Register, Timbre = 1st Waveform, Channel = MIDI Channel 1, Rod antenna mode = Legato on/Pitch Bend on, Pitch bend range = 2 Semitones, Volume trigger = 0, Rod antenna MIDI CC = None, Loop antenna MIDI CC = 7-Volume. MUTE BUTTON: Sends ALL NOTE OFF on selected channel and stay in mute until it is pushed again. AUDIO: Audio processing from antennas to output jack, including volume and pitch pots, LEDs and button functions, is exactly the same as in open theremin V3. ### What can I do to get a theremin like glissando? Activate picth bend and set pitch bend range of the theremin with a high value (12 semitones or 24 semitones). Set pitch bend range of the synth with the same value. ### If I do not trigger with the volume hand it also seems to trigger a new tone with the pitch antenna. Guess this is how MIDI works. When legato mode is activated, if you trigger a note (with volume loop) and go in one direction (with pitch antenna) a new note will be triggered at the limit of pitch bend range. Legato mode is used as a workaround for a limitation of MIDI (max 24 semitones pitch bend). Maybe some synth can perform pitch bend on more that 2 octaves but none of mine does... ### Tweakable parameters (in application.cpp): Changing this to your taste may require some test and trial. "#define VELOCITY_SENS 7" -> How easy it is to reach highest velocity (127). Something betwen 5 and 12. "#define PLAYER_ACCURACY 0.2" -> Pitch accuracy of player. Tolerance on note center for changing notes when playing legato. From 0 (very accurate players) to 0.5 (may generate note toggling). ### LICENSE Original project written by Urs Gaudenz, GaudiLabs, 2016 GNU license. This Project inherits this 2016 GNU License. Check LICENSE file for more information All text above must be included in any redistribution