You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
OpenAudio_ArduinoLibrary/input_i2s_f32.cpp

230 lines
7.5 KiB

/* Audio Library for Teensy 3.X
* Copyright (c) 2014, Paul Stoffregen, paul@pjrc.com
*
* Development of this audio library was funded by PJRC.COM, LLC by sales of
* Teensy and Audio Adaptor boards. Please support PJRC's efforts to develop
* open source software by purchasing Teensy or other PJRC products.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice, development funding notice, and this permission
* notice shall be included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "input_i2s_f32.h"
#include "output_i2s_f32.h"
#include <arm_math.h>
DMAMEM static uint32_t i2s_rx_buffer[AUDIO_BLOCK_SAMPLES];
audio_block_t * AudioInputI2S_F32::block_left = NULL;
audio_block_t * AudioInputI2S_F32::block_right = NULL;
uint16_t AudioInputI2S_F32::block_offset = 0;
bool AudioInputI2S_F32::update_responsibility = false;
DMAChannel AudioInputI2S_F32::dma(false);
void AudioInputI2S_F32::begin(void)
{
dma.begin(true); // Allocate the DMA channel first
//block_left_1st = NULL;
//block_right_1st = NULL;
// TODO: should we set & clear the I2S_RCSR_SR bit here?
AudioOutputI2S_F32::config_i2s();
CORE_PIN13_CONFIG = PORT_PCR_MUX(4); // pin 13, PTC5, I2S0_RXD0
#if defined(KINETISK)
dma.TCD->SADDR = &I2S0_RDR0;
dma.TCD->SOFF = 0;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = 0;
dma.TCD->DADDR = i2s_rx_buffer;
dma.TCD->DOFF = 2;
dma.TCD->CITER_ELINKNO = sizeof(i2s_rx_buffer) / 2;
dma.TCD->DLASTSGA = -sizeof(i2s_rx_buffer);
dma.TCD->BITER_ELINKNO = sizeof(i2s_rx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
#endif
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_RX);
update_responsibility = update_setup();
dma.enable();
I2S0_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // TX clock enable, because sync'd to TX
dma.attachInterrupt(isr);
}
void AudioInputI2S_F32::isr(void)
{
uint32_t daddr, offset;
const int16_t *src, *end;
int16_t *dest_left, *dest_right;
audio_block_t *left, *right;
//digitalWriteFast(3, HIGH);
#if defined(KINETISK)
daddr = (uint32_t)(dma.TCD->DADDR);
#endif
dma.clearInterrupt();
if (daddr < (uint32_t)i2s_rx_buffer + sizeof(i2s_rx_buffer) / 2) {
// DMA is receiving to the first half of the buffer
// need to remove data from the second half
src = (int16_t *)&i2s_rx_buffer[AUDIO_BLOCK_SAMPLES/2];
end = (int16_t *)&i2s_rx_buffer[AUDIO_BLOCK_SAMPLES];
if (AudioInputI2S_F32::update_responsibility) AudioStream_F32::update_all();
} else {
// DMA is receiving to the second half of the buffer
// need to remove data from the first half
src = (int16_t *)&i2s_rx_buffer[0];
end = (int16_t *)&i2s_rx_buffer[AUDIO_BLOCK_SAMPLES/2];
}
left = AudioInputI2S_F32::block_left;
right = AudioInputI2S_F32::block_right;
if (left != NULL && right != NULL) {
offset = AudioInputI2S_F32::block_offset;
if (offset <= AUDIO_BLOCK_SAMPLES/2) {
dest_left = &(left->data[offset]);
dest_right = &(right->data[offset]);
AudioInputI2S_F32::block_offset = offset + AUDIO_BLOCK_SAMPLES/2;
do {
//n = *src++;
//*dest_left++ = (int16_t)n;
//*dest_right++ = (int16_t)(n >> 16);
*dest_left++ = *src++;
*dest_right++ = *src++;
} while (src < end);
}
}
//digitalWriteFast(3, LOW);
}
void AudioInputI2S_F32::update(void)
{
audio_block_t *new_left=NULL, *new_right=NULL, *out_left=NULL, *out_right=NULL;
// allocate 2 new blocks, but if one fails, allocate neither
new_left = AudioStream::allocate();
if (new_left != NULL) {
new_right = AudioStream::allocate();
if (new_right == NULL) {
AudioStream::release(new_left);
new_left = NULL;
}
}
__disable_irq();
if (block_offset >= AUDIO_BLOCK_SAMPLES) {
// the DMA filled 2 blocks, so grab them and get the
// 2 new blocks to the DMA, as quickly as possible
out_left = block_left;
block_left = new_left;
out_right = block_right;
block_right = new_right;
block_offset = 0;
__enable_irq();
// then transmit the DMA's former blocks
// but, first, convert them to F32
audio_block_f32_t *out_left_f32=NULL, *out_right_f32=NULL;
out_left_f32 = AudioStream_F32::allocate_f32();
if (out_left_f32 != NULL) {
out_right_f32 = AudioStream_F32::allocate_f32();
if (out_right_f32 == NULL) {
AudioStream_F32::release(out_left_f32);
out_left_f32 = NULL;
}
}
if (out_left_f32 != NULL) {
//convert to f32
arm_q15_to_float((q15_t *)out_left->data, (float32_t *)out_left_f32->data, AUDIO_BLOCK_SAMPLES);
arm_q15_to_float((q15_t *)out_right->data, (float32_t *)out_right_f32->data, AUDIO_BLOCK_SAMPLES);
//transmit the f32 data!
AudioStream_F32::transmit(out_left_f32,0);
AudioStream_F32::transmit(out_right_f32,1);
AudioStream_F32::release(out_left_f32);
AudioStream_F32::release(out_right_f32);
}
AudioStream::release(out_left);
AudioStream::release(out_right);
//Serial.print(".");
} else if (new_left != NULL) {
// the DMA didn't fill blocks, but we allocated blocks
if (block_left == NULL) {
// the DMA doesn't have any blocks to fill, so
// give it the ones we just allocated
block_left = new_left;
block_right = new_right;
block_offset = 0;
__enable_irq();
} else {
// the DMA already has blocks, doesn't need these
__enable_irq();
AudioStream::release(new_left);
AudioStream::release(new_right);
}
} else {
// The DMA didn't fill blocks, and we could not allocate
// memory... the system is likely starving for memory!
// Sadly, there's nothing we can do.
__enable_irq();
}
}
/******************************************************************/
/*
void AudioInputI2Sslave::begin(void)
{
dma.begin(true); // Allocate the DMA channel first
//block_left_1st = NULL;
//block_right_1st = NULL;
AudioOutputI2Sslave::config_i2s();
CORE_PIN13_CONFIG = PORT_PCR_MUX(4); // pin 13, PTC5, I2S0_RXD0
#if defined(KINETISK)
dma.TCD->SADDR = &I2S0_RDR0;
dma.TCD->SOFF = 0;
dma.TCD->ATTR = DMA_TCD_ATTR_SSIZE(1) | DMA_TCD_ATTR_DSIZE(1);
dma.TCD->NBYTES_MLNO = 2;
dma.TCD->SLAST = 0;
dma.TCD->DADDR = i2s_rx_buffer;
dma.TCD->DOFF = 2;
dma.TCD->CITER_ELINKNO = sizeof(i2s_rx_buffer) / 2;
dma.TCD->DLASTSGA = -sizeof(i2s_rx_buffer);
dma.TCD->BITER_ELINKNO = sizeof(i2s_rx_buffer) / 2;
dma.TCD->CSR = DMA_TCD_CSR_INTHALF | DMA_TCD_CSR_INTMAJOR;
#endif
dma.triggerAtHardwareEvent(DMAMUX_SOURCE_I2S0_RX);
update_responsibility = update_setup();
dma.enable();
I2S0_RCSR |= I2S_RCSR_RE | I2S_RCSR_BCE | I2S_RCSR_FRDE | I2S_RCSR_FR;
I2S0_TCSR |= I2S_TCSR_TE | I2S_TCSR_BCE; // TX clock enable, because sync'd to TX
dma.attachInterrupt(isr);
}
*/