/* MicroDexed MicroDexed is a port of the Dexed sound engine (https://github.com/asb2m10/dexed) for the Teensy-3.5/3.6/4.x with audio shield. Dexed ist heavily based on https://github.com/google/music-synthesizer-for-android (c)2018-2021 H. Wirtz This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #pragma once #include #include "midinotes.h" #include "teensy_board_detection.h" // If you want to test the system with Linux and without any keyboard and/or audio equipment, you can do the following: // 1. In Arduino-IDE enable "Tools->USB-Type->Serial + MIDI + Audio" // 2. Build the firmware with "MIDI_DEVICE_USB" enabled in config.h. // 3. Afterconnecting to a Linux system there should be a MIDI an audio device available that is called "MicroMDexed", so you can start the following: // $ aplaymidi -p 20:0 # e.g. test.mid // $ vkeybd --addr 20:0 // $ arecord -f cd -Dhw:1,0 /tmp/.wav // // Tools for testing MIDI: https://github.com/gbevin/SendMIDI // https://github.com/gbevin/ReceiveMIDI // // e.g.: // * sendmidi dev "MicroDexed MIDI" on 80 127 && sleep 1.0 && sendmidi dev "MicroDexed MIDI" off 80 0 // * sendmidi dev "MicroDexed MIDI" syf addon/SD/90/RitCh1.syx // * amidi -p hw:2,0,0 -s addon/SD/90/RitCh1.syx // // Receiving and storing MIDI SYSEX with Linux: // amidi -p hw:2,0,0 -d -r /tmp/bkup1.syx // // For SYSEX Bank upload via USB: // sed -i.orig 's/SYSEX_MAX_LEN = 290/SYSEX_MAX_LEN = 4104/' /usr/local/arduino-teensy/hardware/teensy/avr/libraries/USBHost_t36/USBHost_t36.h // sed -i.orig 's/^#define USB_MIDI_SYSEX_MAX 290/#define USB_MIDI_SYSEX_MAX 4104/' /usr/local/arduino-teensy/hardware/teensy/avr/cores/teensy3/usb_midi.h // sed -i.orig 's/^#define USB_MIDI_SYSEX_MAX 290/#define USB_MIDI_SYSEX_MAX 4104/' /usr/local/arduino-teensy/hardware/teensy/avr/cores/teensy4/usb_midi.h //#define USB_MIDI_SYSEX_MAX 4104 #define VERSION "1.1.1" //************************************************************************************************* //* DEVICE SETTINGS //************************************************************************************************* //************************************************************************************************* //* MIDI HARDWARE SETTINGS //************************************************************************************************* #define MIDI_DEVICE_DIN Serial1 #define MIDI_DEVICE_USB 1 #define MIDI_DEVICE_USB_HOST 1 //************************************************************************************************* //* AUDIO HARDWARE SETTINGS //************************************************************************************************* // If nothing is defined Teensy internal DAC is used as audio output device! // Left and right channel audio signal is presented on pins A21 and A22. #define AUDIO_DEVICE_USB #define TEENSY_AUDIO_BOARD //#define PT8211_AUDIO //#define TGA_AUDIO_BOARD //#define TEENSY_DAC //#define TEENSY_DAC_SYMMETRIC //#define I2S_AUDIO_ONLY //************************************************************************************************* //* MIDI SOFTWARE SETTINGS //************************************************************************************************* #define DEFAULT_MIDI_CHANNEL MIDI_CHANNEL_OMNI #define SYSEXBANK_DEFAULT 0 #define SYSEXSOUND_DEFAULT 0 //************************************************************************************************* //* DEBUG OUTPUT SETTINGS //************************************************************************************************* #define DEBUG 1 #define SERIAL_SPEED 230400 #define SHOW_XRUN 1 #define SHOW_CPU_LOAD_MSEC 5000 //************************************************************************************************* //* DEXED AND EFFECTS SETTINGS //************************************************************************************************* // Number of Dexed instances #if defined(TEENSY3_6) #warning >>> Sorry, only one instance possible for Teensy-3.6 #define NUM_DEXED 1 // 1 or 2 - nothing else! #else #define NUM_DEXED 2 // 1 or 2 - nothing else! #endif // FX-CHAIN ENABLE/DISABLE #define USE_FX 1 // NUMBER OF PARALLEL SAMPLEDRUMS #define NUM_DRUMS 8 // CHORUS parameters #define MOD_DELAY_SAMPLE_BUFFER int32_t(TIME_MS2SAMPLES(20.0)) // 20.0 ms delay buffer. #define MOD_WAVEFORM WAVEFORM_TRIANGLE // WAVEFORM_SINE WAVEFORM_TRIANGLE WAVEFORM_SAWTOOTH WAVEFORM_SAWTOOTH_REVERSE #define MOD_FILTER_OUTPUT MOD_BUTTERWORTH_FILTER_OUTPUT // MOD_LINKWITZ_RILEY_FILTER_OUTPUT MOD_BUTTERWORTH_FILTER_OUTPUT MOD_NO_FILTER_OUTPUT #define MOD_FILTER_CUTOFF_HZ 2000 // SGTL5000 #ifdef TEENSY_AUDIO_BOARD #define SGTL5000_AUDIO_ENHANCE 1 //#define SGTL5000_AUDIO_THRU 1 #define SGTL5000_HEADPHONE_VOLUME 0.8 #endif #if defined(TEENSY4) #define USE_PLATEREVERB 1 #endif // DELAYTIME #if NUM_DEXED > 1 # if defined(TEENSY4) # define DELAY_MAX_TIME 500 # else # define DELAY_MAX_TIME 100 # endif #else # if defined(TEENSY3_6) # define DELAY_MAX_TIME 400 # elif defined(TEENSY4) # define DELAY_MAX_TIME 1000 # else # define DELAY_MAX_TIME 200 # endif #endif //************************************************************************************************* //* AUDIO SOFTWARE SETTINGS //************************************************************************************************* #define SAMPLE_RATE 44100 #ifdef USE_FX #define AUDIO_MEM SAMPLE_RATE * NUM_DEXED * DELAY_MAX_TIME / 128000 + 36 #else #define AUDIO_MEM NUM_DEXED * 15 #endif #ifdef TEENSY_AUDIO_BOARD /* 13: 3.16 Volts p-p 14: 2.98 Volts p-p 15: 2.83 Volts p-p 16: 2.67 Volts p-p 17: 2.53 Volts p-p 18: 2.39 Volts p-p 19: 2.26 Volts p-p 20: 2.14 Volts p-p 21: 2.02 Volts p-p 22: 1.91 Volts p-p 23: 1.80 Volts p-p 24: 1.71 Volts p-p 25: 1.62 Volts p-p 26: 1.53 Volts p-p 27: 1.44 Volts p-p 28: 1.37 Volts p-p 29: 1.29 Volts p-p (default) 30: 1.22 Volts p-p 31: 1.16 Volts p-p */ #define SGTL5000_LINEOUT_LEVEL 29 #endif //************************************************************************************************* //* UI //************************************************************************************************* #define ENABLE_LCD_UI 1 #define STANDARD_LCD_I2C //#define OLED_SPI // LCD Display //I2C_DISPLAY only #ifdef STANDARD_LCD_I2C #define LCD_I2C_ADDRESS 0x27 //#define LCD_I2C_ADDRESS 0x3f //Display size, must be set for U8X8 as well #define LCD_cols 16 #define LCD_rows 2 #define I2C_DISPLAY // [I2C] SCL: Pin 19, SDA: Pin 18 (https://www.pjrc.com/teensy/td_libs_Wire.html) //#define LCD_GFX 1 #endif #ifdef OLED_SPI #define LCD_cols 16 #define LCD_rows 4 //enable U8X8 support #define U8X8_DISPLAY //enable SPI CS switching #define DISPLAY_LCD_SPI #define U8X8_DISPLAY_CLASS U8X8_SSD1322_NHD_256X64_4W_HW_SPI //#define U8X8_DISPLAY_CLASS U8X8_SSD1306_128X64_NONAME_HW_I2C #define U8X8_CS_PIN 9 #define U8X8_DC_PIN 15 #define U8X8_RESET_PIN 14 #endif #define VOICE_SELECTION_MS 60000 #define BACK_FROM_VOLUME_MS 2000 #define MESSAGE_WAIT_TIME 1000 #define MIDI_DECAY_TIMER 50 //************************************************************************************************* //* HARDWARE SETTINGS //************************************************************************************************* // Teensy Audio Shield #define SDCARD_AUDIO_CS_PIN 10 #define SDCARD_AUDIO_MOSI_PIN 7 #define SDCARD_AUDIO_SCK_PIN 14 #ifndef TEENSY4 // Teensy 3.5 & 3.6 SD card #define SDCARD_TEENSY_CS_PIN BUILTIN_SDCARD #define SDCARD_TEENSY_MOSI_PIN 11 #define SDCARD_TEENSY_SCK_PIN 13 #else #define SDCARD_TEENSY_CS_PIN 10 #define SDCARD_TEENSY_MOSI_PIN 11 #define SDCARD_TEENSY_SCK_PIN 13 #endif // Encoder with button //#define ENCODER_USE_INTERRUPTS #define NUM_ENCODER 2 #define ENC_L_PIN_A 3 #define ENC_L_PIN_B 2 #define BUT_L_PIN 4 #if defined(TEENSY3_6) #define ENC_R_PIN_A 28 #define ENC_R_PIN_B 29 #define BUT_R_PIN 30 #else #if defined(TEENSY4_0) #define ENC_R_PIN_A 6 #define ENC_R_PIN_B 5 #define BUT_R_PIN 8 //#define ENC_R_PIN_A 17 //#define ENC_R_PIN_B 16 //#define BUT_R_PIN 5 #else // ARDUINO_TEENSY41 #define ENC_R_PIN_A 24 #define ENC_R_PIN_B 5 #define BUT_R_PIN 9 #endif #endif #define BUT_DEBOUNCE_MS 20 #define LONG_BUTTON_PRESS 500 // Internal timer #define AUTOSTORE_MS 5000 // EEPROM address #define EEPROM_START_ADDRESS 0xFF #define MAX_BANKS 100 #define MAX_VOICES 32 // voices per bank #define MAX_FX 99 #define MAX_PERFORMANCE 99 #define MAX_VOICECONFIG 99 #define BANK_NAME_LEN 11 // 10 (plus '\0') #define VOICE_NAME_LEN 12 // 11 (plus '\0') #define FILENAME_LEN BANK_NAME_LEN + VOICE_NAME_LEN #define DRUM_NAME_LEN 9 #define FX_CONFIG_PATH "FXCFG" #define FX_CONFIG_NAME "FXCFG" #define PERFORMANCE_CONFIG_PATH "PCFG" #define PERFORMANCE_CONFIG_NAME "PCFG" #define VOICE_CONFIG_PATH "VCFG" #define VOICE_CONFIG_NAME "VCFG" #define FAV_CONFIG_PATH "FAVCFG" #define FAV_CONFIG_NAME "FAVCFG" #define SEQ_CONFIG_PATH "SEQ" #define SEQ_CONFIG_NAME "SEQ" #define MAX_PERF_MOD 30 //************************************************************************************************* //* DO NO CHANGE ANYTHING BEYOND IF YOU DON'T KNOW WHAT YOU ARE DOING !!! //************************************************************************************************* #define MAX_DEXED 2 // No! - even don't think about increasing this number! IT _WILL_ PRODUCE MASSIVE PROBLEMS! #define CONTROL_RATE_MS 50 #define VOL_MAX_FLOAT 0.9 #define EEPROM_MARKER 0x4242 #ifndef NUM_DRUMS #define NUM_DRUMS 0 #endif // MAX_NOTES SETTINGS // Teensy-4.x settings #ifdef TEENSY4 #define MAX_NOTES 32 #endif // Teensy-3.6 settings #if defined(TEENSY3_6) # if defined(USE_FX) # warning >>> With enabled FX a maximum of 14 voices is possible (due to CPU limitations) # define MAX_NOTES 14 # if F_CPU > 180000000 # error >>> Enabled FX with clockrate more than 180MHz is not useful due to RAM limitations. # endif # else # if F_CPU == 256000000 # warning >>> Maximum of 24 voices. # define MAX_NOTES 24 # elif F_CPU == 240000000 # warning >>> Maximum of 22 voices. You should consider to use 256MHz overclocking to get a maximum of 24 voices. # define MAX_NOTES 22 # elif F_CPU == 216000000 # warning >>> Maximum of 20 voices. You should consider to use 256MHz overclocking to get a maximum of 24 voices. # define MAX_NOTES 20 # elif F_CPU == 192000000 # warning >>> Maximum of 18 voices. You should consider to use 256MHz overclocking to get a maximum of 24 voices. # define MAX_NOTES 18 # elif F_CPU == 180000000 # warning >>> Maximum of 16 voices. You should consider to use 256MHz overclocking to get a maximum of 24 voices. # define MAX_NOTES 16 # else # error >>> CPU Clock below 180MHz is not supported # endif # endif #endif #ifdef TEENSY3_5 #error >>> Not supported anymore!!! #endif // MIDI #ifdef MIDI_DEVICE_USB #define USBCON 1 #endif // Some optimizations #define USE_TEENSY_DSP 1 // HELPER MACROS #define TIME_MS2SAMPLES(x) floor(uint32_t(x) * AUDIO_SAMPLE_RATE / 1000) * sizeof(int16_t) #define SAMPLES2TIME_MS(x) float(uint32_t(x) * 1000 / AUDIO_SAMPLE_RATE * sizeof(int16_t) #define XSTR(x) STR(x) #define STR(x) #x // Modulated delay options #define MOD_NO_FILTER_OUTPUT 0 #define MOD_BUTTERWORTH_FILTER_OUTPUT 1 #define MOD_LINKWITZ_RILEY_FILTER_OUTPUT 2 #if defined(TEENSY_DAC_SYMMETRIC) #define MONO_MIN 1 #define MONO_MAX 1 #define MONO_DEFAULT 1 #else #define MONO_MIN 0 #define MONO_MAX 3 #define MONO_DEFAULT 0 #endif #define MIDI_CONTROLLER_MODE_MAX 2 #define VOLUME_MIN 0 #define VOLUME_MAX 100 #define VOLUME_DEFAULT 80 //#define VOLUME_ENC_STEPS 5 #define PANORAMA_MIN 0 #define PANORAMA_MAX 40 #define PANORAMA_DEFAULT 20 #define MIDI_CHANNEL_MIN MIDI_CHANNEL_OMNI #define MIDI_CHANNEL_MAX 16 #define MIDI_CHANNEL_DEFAULT MIDI_CHANNEL_OMNI #define INSTANCE_LOWEST_NOTE_MIN 21 #define INSTANCE_LOWEST_NOTE_MAX 108 #define INSTANCE_LOWEST_NOTE_DEFAULT 21 #define INSTANCE_HIGHEST_NOTE_MIN 21 #define INSTANCE_HIGHEST_NOTE_MAX 108 #define INSTANCE_HIGHEST_NOTE_DEFAULT 108 #define CHORUS_FREQUENCY_MIN 0 #define CHORUS_FREQUENCY_MAX 100 #define CHORUS_FREQUENCY_DEFAULT 0 #define CHORUS_WAVEFORM_MIN 0 #define CHORUS_WAVEFORM_MAX 1 #define CHORUS_WAVEFORM_DEFAULT 0 #define CHORUS_DEPTH_MIN 0 #define CHORUS_DEPTH_MAX 100 #define CHORUS_DEPTH_DEFAULT 0 #define CHORUS_LEVEL_MIN 0 #define CHORUS_LEVEL_MAX 100 #define CHORUS_LEVEL_DEFAULT 0 #define DELAY_TIME_MIN 0 #define DELAY_TIME_MAX DELAY_MAX_TIME/10 #define DELAY_TIME_DEFAULT 0 #define DELAY_FEEDBACK_MIN 0 #define DELAY_FEEDBACK_MAX 100 #define DELAY_FEEDBACK_DEFAULT 0 #define DELAY_LEVEL_MIN 0 #define DELAY_LEVEL_MAX 100 #define DELAY_LEVEL_DEFAULT 0 #define DELAY_SYNC_MIN 0 #define DELAY_SYNC_MAX 9 #define DELAY_SYNC_DEFAULT 0 #define REVERB_ROOMSIZE_MIN 0 #define REVERB_ROOMSIZE_MAX 100 #define REVERB_ROOMSIZE_DEFAULT 0 #define REVERB_DAMPING_MIN 0 #define REVERB_DAMPING_MAX 100 #define REVERB_DAMPING_DEFAULT 0 #define REVERB_LOWPASS_MIN 0 #define REVERB_LOWPASS_MAX 100 #define REVERB_LOWPASS_DEFAULT 0 #define REVERB_LODAMP_MIN 0 #define REVERB_LODAMP_MAX 100 #define REVERB_LODAMP_DEFAULT 0 #define REVERB_HIDAMP_MIN 0 #define REVERB_HIDAMP_MAX 100 #define REVERB_HIDAMP_DEFAULT 0 #define REVERB_DIFFUSION_MIN 0 #define REVERB_DIFFUSION_MAX 100 #define REVERB_DIFFUSION_DEFAULT 0 #define REVERB_LEVEL_MIN 0 #define REVERB_LEVEL_MAX 100 #define REVERB_LEVEL_DEFAULT 0 #define REVERB_SEND_MIN 0 #define REVERB_SEND_MAX 100 #define REVERB_SEND_DEFAULT 0 #define FILTER_CUTOFF_MIN 0 #define FILTER_CUTOFF_MAX 100 #define FILTER_CUTOFF_DEFAULT 0 #define FILTER_RESONANCE_MIN 0 #define FILTER_RESONANCE_MAX 100 #define FILTER_RESONANCE_DEFAULT 0 #define TRANSPOSE_MIN 0 #define TRANSPOSE_MAX 48 #define TRANSPOSE_DEFAULT 12 #define TUNE_MIN 1 #define TUNE_MAX 199 #define TUNE_DEFAULT 100 #define SOUND_INTENSITY_MIN 0 #define SOUND_INTENSITY_MAX 127 #define SOUND_INTENSITY_DEFAULT 100 #define SOUND_INTENSITY_AMP_MAX 1.27 #define POLYPHONY_MIN 0 #define POLYPHONY_MAX MAX_NOTES #define POLYPHONY_DEFAULT MAX_NOTES / NUM_DEXED #define MONOPOLY_MIN 0 #define MONOPOLY_MAX 1 #define MONOPOLY_DEFAULT 0 #define NOTE_REFRESH_MIN 0 #define NOTE_REFRESH_MAX 1 #define NOTE_REFRESH_DEFAULT 0 #define PB_RANGE_MIN 0 #define PB_RANGE_MAX 12 #define PB_RANGE_DEFAULT 1 #define PB_STEP_MIN 0 #define PB_STEP_MAX 12 #define PB_STEP_DEFAULT 0 #define MW_RANGE_MIN 0 #define MW_RANGE_MAX 99 #define MW_RANGE_DEFAULT 50 #define MW_ASSIGN_MIN 0 #define MW_ASSIGN_MAX 7 #define MW_ASSIGN_DEFAULT 0 // Bitmapped: 0: Pitch, 1: Amp, 2: Bias #define MW_MODE_MIN 0 #define MW_MODE_MAX MIDI_CONTROLLER_MODE_MAX #define MW_MODE_DEFAULT 0 #define FC_RANGE_MIN 0 #define FC_RANGE_MAX 99 #define FC_RANGE_DEFAULT 50 #define FC_ASSIGN_MIN 0 #define FC_ASSIGN_MAX 7 #define FC_ASSIGN_DEFAULT 0 // Bitmapped: 0: Pitch, 1: Amp, 2: Bias #define FC_MODE_MIN 0 #define FC_MODE_MAX MIDI_CONTROLLER_MODE_MAX #define FC_MODE_DEFAULT 0 #define BC_RANGE_MIN 0 #define BC_RANGE_MAX 99 #define BC_RANGE_DEFAULT 50 #define BC_ASSIGN_MIN 0 #define BC_ASSIGN_MAX 7 #define BC_ASSIGN_DEFAULT 0 // Bitmapped: 0: Pitch, 1: Amp, 2: Bias #define BC_MODE_MIN 0 #define BC_MODE_MAX MIDI_CONTROLLER_MODE_MAX #define BC_MODE_DEFAULT 0 #define AT_RANGE_MIN 0 #define AT_RANGE_MAX 99 #define AT_RANGE_DEFAULT 50 #define AT_ASSIGN_MIN 0 #define AT_ASSIGN_MAX 7 #define AT_ASSIGN_DEFAULT 0 // Bitmapped: 0: Pitch, 1: Amp, 2: Bias #define AT_MODE_MIN 0 #define AT_MODE_MAX MIDI_CONTROLLER_MODE_MAX #define AT_MODE_DEFAULT 0 #define OP_ENABLED_MIN 0 #define OP_ENABLED_MAX 0x3f #define OP_ENABLED_DEFAULT OP_ENABLED_MAX #define PORTAMENTO_MODE_MIN 0 #define PORTAMENTO_MODE_MAX 1 #define PORTAMENTO_MODE_DEFAULT 0 // 0: Retain, 1: Follow #define PORTAMENTO_GLISSANDO_MIN 0 #define PORTAMENTO_GLISSANDO_MAX 1 #define PORTAMENTO_GLISSANDO_DEFAULT 0 #define PORTAMENTO_TIME_MIN 0 #define PORTAMENTO_TIME_MAX 99 #define PORTAMENTO_TIME_DEFAULT 0 #define INSTANCES_MIN 1 #define INSTANCES_MAX NUM_DEXED #define INSTANCES_DEFAULT 1 #define INSTANCE_NOTE_START_MIN MIDI_AIS0 #define INSTANCE_NOTE_START_MAX MIDI_B7 #define INSTANCE_NOTE_START_DEFAULT INSTANCE_NOTE_START_MIN #define INSTANCE_NOTE_END_MIN MIDI_AIS0 #define INSTANCE_NOTE_END_MAX MIDI_B7 #define INSTANCE_NOTE_END_DEFAULT INSTANCE_NOTE_END_MAX #define SOFT_MIDI_THRU_MIN 0 #define SOFT_MIDI_THRU_MAX 1 #define SOFT_MIDI_THRU_DEFAULT 1 #define VELOCITY_LEVEL_MIN 100 #define VELOCITY_LEVEL_MAX 127 #define VELOCITY_LEVEL_DEFAULT 100 #define PERFORMANCE_NUM_MIN 0 #define PERFORMANCE_NUM_MAX MAX_PERFORMANCE #define PERFORMANCE_NUM_DEFAULT -1 #define FX_NUM_MIN 0 #define FX_NUM_MAX MAX_FX #define FX_NUM_DEFAULT -1 #define VOICECONFIG_NUM_MIN 0 #define VOICECONFIG_NUM_MAX MAX_VOICECONFIG #define VOICECONFIG_NUM_DEFAULT -1 #define EQ_1_MIN -10 #define EQ_1_MAX 10 #define EQ_1_DEFAULT 0 #define EQ_2_MIN -10 #define EQ_2_MAX 10 #define EQ_2_DEFAULT 0 #define EQ_3_MIN -10 #define EQ_3_MAX 10 #define EQ_3_DEFAULT 0 #define EQ_4_MIN -10 #define EQ_4_MAX 10 #define EQ_4_DEFAULT 0 #define EQ_5_MIN -10 #define EQ_5_MAX 10 #define EQ_5_DEFAULT 0 #define EQ_6_MIN -10 #define EQ_6_MAX 10 #define EQ65_DEFAULT 0 #define EQ_7_MIN -10 #define EQ_7_MAX 10 #define EQ_7_DEFAULT 0 // Buffer-size define for load/save configuration as JSON #define JSON_BUFFER_SIZE 8192 // Internal configuration structure typedef struct dexed_s { uint8_t lowest_note; uint8_t highest_note; uint8_t transpose; uint8_t tune; uint8_t sound_intensity; uint8_t pan; uint8_t polyphony; uint8_t velocity_level; uint8_t monopoly; uint8_t note_refresh; uint8_t pb_range; uint8_t pb_step; uint8_t mw_range; uint8_t mw_assign; uint8_t mw_mode; uint8_t fc_range; uint8_t fc_assign; uint8_t fc_mode; uint8_t bc_range; uint8_t bc_assign; uint8_t bc_mode; uint8_t at_range; uint8_t at_assign; uint8_t at_mode; uint8_t portamento_mode; uint8_t portamento_glissando; uint8_t portamento_time; uint8_t op_enabled; uint8_t midi_channel; } dexed_t; typedef struct fx_s { uint8_t filter_cutoff[MAX_DEXED]; uint8_t filter_resonance[MAX_DEXED]; uint8_t chorus_frequency[MAX_DEXED]; uint8_t chorus_waveform[MAX_DEXED]; uint8_t chorus_depth[MAX_DEXED]; uint8_t chorus_level[MAX_DEXED]; uint8_t delay_time[MAX_DEXED]; uint8_t delay_feedback[MAX_DEXED]; uint8_t delay_level[MAX_DEXED]; uint8_t delay_sync[MAX_DEXED]; uint8_t reverb_send[MAX_DEXED]; uint8_t reverb_roomsize; uint8_t reverb_damping; uint8_t reverb_lowpass; uint8_t reverb_lodamp; uint8_t reverb_hidamp; uint8_t reverb_diffusion; uint8_t reverb_level; int8_t eq_1; int8_t eq_2; int8_t eq_3; int8_t eq_4; int8_t eq_5; int8_t eq_6; int8_t eq_7; } fx_t; typedef struct performance_s { uint8_t bank[MAX_DEXED]; uint8_t voice[MAX_DEXED]; int8_t voiceconfig_number[MAX_DEXED]; int8_t fx_number; } performance_t; typedef struct sys_s { uint8_t instances; uint8_t vol; uint8_t mono; uint8_t soft_midi_thru; int8_t performance_number; uint8_t favorites; } sys_t; typedef struct configuration_s { sys_t sys; fx_t fx; performance_t performance; dexed_t dexed[MAX_DEXED]; uint16_t _marker_; } config_t; #if !defined(_MAPFLOAT) #define _MAPFLOAT inline float mapfloat(float val, float in_min, float in_max, float out_min, float out_max) { return (val - in_min) * (out_max - out_min) / (in_max - in_min) + out_min; } #endif