/* I2C.cpp - I2C library Copyright (c) 2011-2012 Wayne Truchsess. All right reserved. Rev 5.0 - January 24th, 2012 - Removed the use of interrupts completely from the library so TWI state changes are now polled. - Added calls to lockup() function in most functions to combat arbitration problems - Fixed scan() procedure which left timeouts enabled and set to 80msec after exiting procedure - Changed scan() address range back to 0 - 0x7F - Removed all Wire legacy functions from library - A big thanks to Richard Baldwin for all the testing and feedback with debugging bus lockups! Rev 4.0 - January 14th, 2012 - Updated to make compatible with 8MHz clock frequency Rev 3.0 - January 9th, 2012 - Modified library to be compatible with Arduino 1.0 - Changed argument type from boolean to uint8_t in pullUp(), setSpeed() and receiveByte() functions for 1.0 compatability - Modified return values for timeout feature to report back where in the transmission the timeout occured. - added function scan() to perform a bus scan to find devices attached to the I2C bus. Similar to work done by Todbot and Nick Gammon Rev 2.0 - September 19th, 2011 - Added support for timeout function to prevent and recover from bus lockup (thanks to PaulS and CrossRoads on the Arduino forum) - Changed return type for stop() from void to uint8_t to handle timeOut function Rev 1.0 - August 8th, 2011 This is a modified version of the Arduino Wire/TWI library. Functions were rewritten to provide more functionality and also the use of Repeated Start. Some I2C devices will not function correctly without the use of a Repeated Start. The initial version of this library only supports the Master. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #if(ARDUINO >= 100) #include #else #include #endif #include #include "I2C.h" uint8_t I2C::bytesAvailable = 0; uint8_t I2C::bufferIndex = 0; uint8_t I2C::totalBytes = 0; uint16_t I2C::timeOutDelay = 0; I2C::I2C() { } ////////////// Public Methods //////////////////////////////////////// void I2C::begin() { #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__) // activate internal pull-ups for twi // as per note from atmega8 manual pg167 sbi(PORTC, 4); sbi(PORTC, 5); #else // activate internal pull-ups for twi // as per note from atmega128 manual pg204 sbi(PORTD, 0); sbi(PORTD, 1); #endif // initialize twi prescaler and bit rate cbi(TWSR, TWPS0); cbi(TWSR, TWPS1); TWBR = ((F_CPU / 100000) - 16) / 2; // enable twi module and acks TWCR = _BV(TWEN) | _BV(TWEA); } void I2C::end() { TWCR = 0; } void I2C::timeOut(uint16_t _timeOut) { timeOutDelay = _timeOut; } void I2C::setSpeed(uint8_t _fast) { if(!_fast) { TWBR = ((F_CPU / 100000) - 16) / 2; } else { TWBR = ((F_CPU / 400000) - 16) / 2; } } void I2C::pullup(uint8_t activate) { if(activate) { #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__) // activate internal pull-ups for twi // as per note from atmega8 manual pg167 sbi(PORTC, 4); sbi(PORTC, 5); #else // activate internal pull-ups for twi // as per note from atmega128 manual pg204 sbi(PORTD, 0); sbi(PORTD, 1); #endif } else { #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__) // deactivate internal pull-ups for twi // as per note from atmega8 manual pg167 cbi(PORTC, 4); cbi(PORTC, 5); #else // deactivate internal pull-ups for twi // as per note from atmega128 manual pg204 cbi(PORTD, 0); cbi(PORTD, 1); #endif } } void I2C::scan() { uint16_t tempTime = timeOutDelay; timeOut(80); uint8_t totalDevicesFound = 0; Serial.println(F("Scanning for devices...please wait")); Serial.println(); for(uint8_t s = 0; s <= 0x7F; s++) { returnStatus = 0; returnStatus = start(); if(!returnStatus) { returnStatus = sendAddress(SLA_W(s)); } if(returnStatus) { if(returnStatus == 1) { Serial.println(F("There is a problem with the bus, could not complete scan")); timeOutDelay = tempTime; return; } } else { Serial.print(F("Found device at address - ")); Serial.print(F(" 0x")); Serial.println(s,HEX); totalDevicesFound++; } stop(); } if(!totalDevicesFound){Serial.println(F("No devices found"));} timeOutDelay = tempTime; } uint8_t I2C::available() { return(bytesAvailable); } uint8_t I2C::receive() { bufferIndex = totalBytes - bytesAvailable; if(!bytesAvailable) { bufferIndex = 0; return(0); } bytesAvailable--; return(data[bufferIndex]); } /*return values for new functions that use the timeOut feature will now return at what point in the transmission the timeout occurred. Looking at a full communication sequence between a master and slave (transmit data and then readback data) there a total of 7 points in the sequence where a timeout can occur. These are listed below and correspond to the returned value: 1 - Waiting for successful completion of a Start bit 2 - Waiting for ACK/NACK while addressing slave in transmit mode (MT) 3 - Waiting for ACK/NACK while sending data to the slave 4 - Waiting for successful completion of a Repeated Start 5 - Waiting for ACK/NACK while addressing slave in receiver mode (MR) 6 - Waiting for ACK/NACK while receiving data from the slave 7 - Waiting for successful completion of the Stop bit All possible return values: 0 Function executed with no errors 1 - 7 Timeout occurred, see above list 8 - 0xFF See datasheet for exact meaning */ ///////////////////////////////////////////////////// uint8_t I2C::write(uint8_t address, uint8_t registerAddress) { returnStatus = 0; returnStatus = start(); if(returnStatus){return(returnStatus);} returnStatus = sendAddress(SLA_W(address)); if(returnStatus) { if(returnStatus == 1){return(2);} return(returnStatus); } returnStatus = sendByte(registerAddress); if(returnStatus) { if(returnStatus == 1){return(3);} return(returnStatus); } returnStatus = stop(); if(returnStatus) { if(returnStatus == 1){return(7);} return(returnStatus); } return(returnStatus); } uint8_t I2C::write(int address, int registerAddress) { return(write((uint8_t) address, (uint8_t) registerAddress)); } uint8_t I2C::write(uint8_t address, uint8_t registerAddress, uint8_t data) { returnStatus = 0; returnStatus = start(); if(returnStatus){return(returnStatus);} returnStatus = sendAddress(SLA_W(address)); if(returnStatus) { if(returnStatus == 1){return(2);} return(returnStatus); } returnStatus = sendByte(registerAddress); if(returnStatus) { if(returnStatus == 1){return(3);} return(returnStatus); } returnStatus = sendByte(data); if(returnStatus) { if(returnStatus == 1){return(3);} return(returnStatus); } returnStatus = stop(); if(returnStatus) { if(returnStatus == 1){return(7);} return(returnStatus); } return(returnStatus); } uint8_t I2C::write(int address, int registerAddress, int data) { return(write((uint8_t) address, (uint8_t) registerAddress, (uint8_t) data)); } uint8_t I2C::write(uint8_t address, uint8_t registerAddress, char *data) { uint8_t bufferLength = strlen(data); returnStatus = 0; returnStatus = write(address, registerAddress, (uint8_t*)data, bufferLength); return(returnStatus); } uint8_t I2C::write(uint8_t address, uint8_t registerAddress, uint8_t *data, uint8_t numberBytes) { returnStatus = 0; returnStatus = start(); if(returnStatus){return(returnStatus);} returnStatus = sendAddress(SLA_W(address)); if(returnStatus) { if(returnStatus == 1){return(2);} return(returnStatus); } returnStatus = sendByte(registerAddress); if(returnStatus) { if(returnStatus == 1){return(3);} return(returnStatus); } for (uint8_t i = 0; i < numberBytes; i++) { returnStatus = sendByte(data[i]); if(returnStatus) { if(returnStatus == 1){return(3);} return(returnStatus); } } returnStatus = stop(); if(returnStatus) { if(returnStatus == 1){return(7);} return(returnStatus); } return(returnStatus); } uint8_t I2C::read(int address, int numberBytes) { return(read((uint8_t) address, (uint8_t) numberBytes)); } uint8_t I2C::read(uint8_t address, uint8_t numberBytes) { bytesAvailable = 0; bufferIndex = 0; if(numberBytes == 0){numberBytes++;} nack = numberBytes - 1; returnStatus = 0; returnStatus = start(); if(returnStatus){return(returnStatus);} returnStatus = sendAddress(SLA_R(address)); if(returnStatus) { if(returnStatus == 1){return(5);} return(returnStatus); } for(uint8_t i = 0; i < numberBytes; i++) { if( i == nack ) { returnStatus = receiveByte(0); if(returnStatus == 1){return(6);} if(returnStatus != MR_DATA_NACK){return(returnStatus);} } else { returnStatus = receiveByte(1); if(returnStatus == 1){return(6);} if(returnStatus != MR_DATA_ACK){return(returnStatus);} } data[i] = TWDR; bytesAvailable = i+1; totalBytes = i+1; } returnStatus = stop(); if(returnStatus) { if(returnStatus == 1){return(7);} return(returnStatus); } return(returnStatus); } uint8_t I2C::read(int address, int registerAddress, int numberBytes) { return(read((uint8_t) address, (uint8_t) registerAddress, (uint8_t) numberBytes)); } uint8_t I2C::read(uint8_t address, uint8_t registerAddress, uint8_t numberBytes) { bytesAvailable = 0; bufferIndex = 0; if(numberBytes == 0){numberBytes++;} nack = numberBytes - 1; returnStatus = 0; returnStatus = start(); if(returnStatus){return(returnStatus);} returnStatus = sendAddress(SLA_W(address)); if(returnStatus) { if(returnStatus == 1){return(2);} return(returnStatus); } returnStatus = sendByte(registerAddress); if(returnStatus) { if(returnStatus == 1){return(3);} return(returnStatus); } returnStatus = start(); if(returnStatus) { if(returnStatus == 1){return(4);} return(returnStatus); } returnStatus = sendAddress(SLA_R(address)); if(returnStatus) { if(returnStatus == 1){return(5);} return(returnStatus); } for(uint8_t i = 0; i < numberBytes; i++) { if( i == nack ) { returnStatus = receiveByte(0); if(returnStatus == 1){return(6);} if(returnStatus != MR_DATA_NACK){return(returnStatus);} } else { returnStatus = receiveByte(1); if(returnStatus == 1){return(6);} if(returnStatus != MR_DATA_ACK){return(returnStatus);} } data[i] = TWDR; bytesAvailable = i+1; totalBytes = i+1; } returnStatus = stop(); if(returnStatus) { if(returnStatus == 1){return(7);} return(returnStatus); } return(returnStatus); } uint8_t I2C::read(uint8_t address, uint8_t numberBytes, uint8_t *dataBuffer) { bytesAvailable = 0; bufferIndex = 0; if(numberBytes == 0){numberBytes++;} nack = numberBytes - 1; returnStatus = 0; returnStatus = start(); if(returnStatus){return(returnStatus);} returnStatus = sendAddress(SLA_R(address)); if(returnStatus) { if(returnStatus == 1){return(5);} return(returnStatus); } for(uint8_t i = 0; i < numberBytes; i++) { if( i == nack ) { returnStatus = receiveByte(0); if(returnStatus == 1){return(6);} if(returnStatus != MR_DATA_NACK){return(returnStatus);} } else { returnStatus = receiveByte(1); if(returnStatus == 1){return(6);} if(returnStatus != MR_DATA_ACK){return(returnStatus);} } dataBuffer[i] = TWDR; bytesAvailable = i+1; totalBytes = i+1; } returnStatus = stop(); if(returnStatus) { if(returnStatus == 1){return(7);} return(returnStatus); } return(returnStatus); } uint8_t I2C::read(uint8_t address, uint8_t registerAddress, uint8_t numberBytes, uint8_t *dataBuffer) { bytesAvailable = 0; bufferIndex = 0; if(numberBytes == 0){numberBytes++;} nack = numberBytes - 1; returnStatus = 0; returnStatus = start(); if(returnStatus){return(returnStatus);} returnStatus = sendAddress(SLA_W(address)); if(returnStatus) { if(returnStatus == 1){return(2);} return(returnStatus); } returnStatus = sendByte(registerAddress); if(returnStatus) { if(returnStatus == 1){return(3);} return(returnStatus); } returnStatus = start(); if(returnStatus) { if(returnStatus == 1){return(4);} return(returnStatus); } returnStatus = sendAddress(SLA_R(address)); if(returnStatus) { if(returnStatus == 1){return(5);} return(returnStatus); } for(uint8_t i = 0; i < numberBytes; i++) { if( i == nack ) { returnStatus = receiveByte(0); if(returnStatus == 1){return(6);} if(returnStatus != MR_DATA_NACK){return(returnStatus);} } else { returnStatus = receiveByte(1); if(returnStatus == 1){return(6);} if(returnStatus != MR_DATA_ACK){return(returnStatus);} } dataBuffer[i] = TWDR; bytesAvailable = i+1; totalBytes = i+1; } returnStatus = stop(); if(returnStatus) { if(returnStatus == 1){return(7);} return(returnStatus); } return(returnStatus); } /////////////// Private Methods //////////////////////////////////////// uint8_t I2C::start() { unsigned long startingTime = millis(); TWCR = (1<= timeOutDelay) { lockUp(); return(1); } } if ((TWI_STATUS == START) || (TWI_STATUS == REPEATED_START)) { return(0); } if (TWI_STATUS == LOST_ARBTRTN) { uint8_t bufferedStatus = TWI_STATUS; lockUp(); return(bufferedStatus); } return(TWI_STATUS); } uint8_t I2C::sendAddress(uint8_t i2cAddress) { TWDR = i2cAddress; unsigned long startingTime = millis(); TWCR = (1<= timeOutDelay) { lockUp(); return(1); } } if ((TWI_STATUS == MT_SLA_ACK) || (TWI_STATUS == MR_SLA_ACK)) { return(0); } uint8_t bufferedStatus = TWI_STATUS; if ((TWI_STATUS == MT_SLA_NACK) || (TWI_STATUS == MR_SLA_NACK)) { stop(); return(bufferedStatus); } else { lockUp(); return(bufferedStatus); } } uint8_t I2C::sendByte(uint8_t i2cData) { TWDR = i2cData; unsigned long startingTime = millis(); TWCR = (1<= timeOutDelay) { lockUp(); return(1); } } if (TWI_STATUS == MT_DATA_ACK) { return(0); } uint8_t bufferedStatus = TWI_STATUS; if (TWI_STATUS == MT_DATA_NACK) { stop(); return(bufferedStatus); } else { lockUp(); return(bufferedStatus); } } uint8_t I2C::receiveByte(uint8_t ack) { unsigned long startingTime = millis(); if(ack) { TWCR = (1<= timeOutDelay) { lockUp(); return(1); } } if (TWI_STATUS == LOST_ARBTRTN) { uint8_t bufferedStatus = TWI_STATUS; lockUp(); return(bufferedStatus); } return(TWI_STATUS); } uint8_t I2C::receiveByte(uint8_t ack, uint8_t *target) { uint8_t stat = I2C::receiveByte(ack); if (stat == 1) { return(6); } if (ack) { if(stat != MR_DATA_ACK) { *target = 0x0; return(stat); } } else { if(stat != MR_DATA_NACK) { *target = 0x0; return(stat); } } *target = TWDR; // I suppose that if we get this far we're ok return 0; } uint8_t I2C::stop() { unsigned long startingTime = millis(); TWCR = (1<= timeOutDelay) { lockUp(); return(1); } } return(0); } void I2C::lockUp() { TWCR = 0; //releases SDA and SCL lines to high impedance TWCR = _BV(TWEN) | _BV(TWEA); //reinitialize TWI } I2C I2c = I2C();