From 065a4674d29837ff9c3342520ab2589834d9e90a Mon Sep 17 00:00:00 2001 From: tangjie133 <1334875503@qq.com> Date: Tue, 24 Aug 2021 14:17:06 +0800 Subject: [PATCH] compatibility esp8266 --- DFRobot_AS3935_I2C.cpp | 77 +- DFRobot_AS3935_I2C.h | 41 +- Lib_I2C.cpp | 728 ------------------ Lib_I2C.h | 76 -- ...Robot_AS3935_lightning_sensor_detailed.ino | 50 +- ...Robot_AS3935_lightning_sensor_ordinary.ino | 36 +- readme.md | 3 +- 7 files changed, 153 insertions(+), 858 deletions(-) delete mode 100644 Lib_I2C.cpp delete mode 100644 Lib_I2C.h diff --git a/DFRobot_AS3935_I2C.cpp b/DFRobot_AS3935_I2C.cpp index b499b39..ce1e83c 100644 --- a/DFRobot_AS3935_I2C.cpp +++ b/DFRobot_AS3935_I2C.cpp @@ -12,7 +12,10 @@ DFRobot_AS3935_I2C::DFRobot_AS3935_I2C(uint8_t irqx) { irq = irqx; // initalize the IRQ pins + // pinMode(irq, OUTPUT); + // digitalWrite(irq,1); pinMode(irq, INPUT); + } void DFRobot_AS3935_I2C::setI2CAddress(uint8_t devAddx) @@ -34,11 +37,14 @@ void DFRobot_AS3935_I2C::setI2CAddress(uint8_t devAddx) uint8_t DFRobot_AS3935_I2C::singRegRead(uint8_t regAdd) { // I2C address Register address num bytes - I2c.read((uint8_t)devAdd, (uint8_t)regAdd, (uint8_t)0x01); // Use I2C library to read register - uint8_t regData = I2c.receive(); // receive the I2C data - return regData; + //I2c.read((uint8_t)devAdd, (uint8_t)regAdd, (uint8_t)0x01); // Use I2C library to read register + //uint8_t regData = I2c.receive(); // receive the I2C data + uint8_t buf[1]; + readReg(regAdd, buf, 1); + return buf[0]; } + void DFRobot_AS3935_I2C::singRegWrite(uint8_t regAdd, uint8_t dataMask, uint8_t regData) { // start by reading original register data (only modifying what we need to) @@ -48,9 +54,12 @@ void DFRobot_AS3935_I2C::singRegWrite(uint8_t regAdd, uint8_t dataMask, uint8_t // note: 'DataMask' must be bits targeted for replacement // add'l note: this function does NOT shift values into the proper place... they need to be there already uint8_t newRegData = ((origRegData & ~dataMask) | (regData & dataMask)); + uint8_t buf[1]; + buf[0] = newRegData; // finally, write the data to the register - I2c.write(devAdd, regAdd, newRegData); + //I2c.write(devAdd, regAdd, newRegData); + writeReg(regAdd, buf, 1); //Serial.print("wrt: "); //Serial.print(newRegData,HEX); //Serial.print(" Act: "); @@ -65,15 +74,21 @@ int DFRobot_AS3935_I2C::defInit() int DFRobot_AS3935_I2C::reset() { // run PRESET_DEFAULT Direct Command to set all registers in default state - int error = I2c.write(devAdd, (uint8_t)0x3C, (uint8_t)0x96); - delay(2); // wait 2ms to complete - return error; + //int error = I2c.write(devAdd, (uint8_t)0x3C, (uint8_t)0x96); + uint8_t buf[1]; + buf[0] = 0x96; + + writeReg(0x3c, buf, 1); + return 0; } void DFRobot_AS3935_I2C::calRCO() { // run ALIB_RCO Direct Command to cal internal RCO - I2c.write(devAdd, (uint8_t)0x3D, (uint8_t)0x96); + //I2c.write(devAdd, (uint8_t)0x3D, (uint8_t)0x96); + uint8_t buf[1]; + buf[0] = 0x96; + writeReg(0x3D, buf, 1); delay(2); // wait 2ms to complete } @@ -369,3 +384,49 @@ void DFRobot_AS3935_I2C::manualCal(uint8_t capacitance, uint8_t location, uint8_ } // a nice function would be to read the last 'x' strike data values.... +uint8_t DFRobot_AS3935_I2C::begin(void) +{ + uint8_t buf[2]; + Wire.begin(); + Wire.setClock(400000); + DBG("i2c init"); + if(readReg(0, buf, 2) == 2){ + DBG("return"); + return 0; + } + return 1; +} + +void DFRobot_AS3935_I2C::writeReg(uint8_t reg, void *pBuf, size_t size) +{ + if(pBuf == NULL){ + DBG("pBuf ERROR!! :null pointer"); + } + uint8_t *_pBuf = (uint8_t*)pBuf; + Wire.beginTransmission(devAdd); + Wire.write(reg); + for(size_t i = 0; i < size; i++){ + Wire.write(_pBuf[i]); + } + Wire.endTransmission(); + DBG("i2c write"); +} + +size_t DFRobot_AS3935_I2C::readReg(uint8_t reg, void *pBuf, size_t size) +{ + if(pBuf == NULL){ + DBG("pBuf ERROR!!:null pointer"); + return 0; + } + uint8_t *_pBuf = (uint8_t*)pBuf; + Wire.beginTransmission(devAdd); + Wire.write(reg); + Wire.endTransmission(false); + Wire.requestFrom(devAdd, size); + for(size_t i = 0; i < size; i++){ + _pBuf[i] = Wire.read(); + DBG(_pBuf[i], HEX); + } + return size; +} + diff --git a/DFRobot_AS3935_I2C.h b/DFRobot_AS3935_I2C.h index 4b775c1..b491db4 100644 --- a/DFRobot_AS3935_I2C.h +++ b/DFRobot_AS3935_I2C.h @@ -2,21 +2,30 @@ #define DFRobot_AS3935_I2C_h #include "Arduino.h" -#include "avr/pgmspace.h" -#include "util/delay.h" #include "stdlib.h" -#include "Lib_I2C.h" + +#include "Wire.h" // I2C address #define AS3935_ADD1 0x01 // A0=high, A1=low #define AS3935_ADD3 0x03 // A0=high, A1=high #define AS3935_ADD2 0x02 // A0=low, A1=high +//#define ENABLE_DBG +#ifdef ENABLE_DBG +#define DBG(...){Serial.print("[");Serial.print(__FUNCTION__);\ + Serial.print("():");Serial.print(__LINE__);\ + Serial.print("]");Serial.print(__VA_ARGS__); Serial.println("");} +#else +#define DBG(...) +#endif + class DFRobot_AS3935_I2C { public: DFRobot_AS3935_I2C(uint8_t irqx, uint8_t devAddx); DFRobot_AS3935_I2C(uint8_t irqx); + uint8_t begin(void); /*! Set i2c address */ void setI2CAddress(uint8_t devAddx); /*! Manual calibration */ @@ -50,11 +59,33 @@ class DFRobot_AS3935_I2C private: uint8_t irq, devAdd; - uint8_t singRegRead(uint8_t regAdd); - void singRegWrite(uint8_t regAdd, uint8_t dataMask, uint8_t regData); + uint8_t singRegRead(uint8_t regAdd);//原始I2C数据读取 + void singRegWrite(uint8_t regAdd, uint8_t dataMask, uint8_t regData);//原始数据发送 int reset(void); void powerDown(void); void calRCO(void); + + /** + * @brief Write register value through IIC bus + * + * @param reg Register address 8bits + * @param pBuf Storage cache to write data in + * @param size The length of data to be written + */ + void writeReg(uint8_t reg, void *pBuf, size_t size); + //void writeRegNoStop(uint8_t reg, void *pBuf, size_t size) + + /** + * @brief Read register value through IIC bus + * + * @param reg Register address 8bits + * @param pBuf Read data storage cache + * @param size Read the length of data + * @return Return the read length + */ + size_t readReg(uint8_t reg, void *pBuf, size_t size); + + }; #endif diff --git a/Lib_I2C.cpp b/Lib_I2C.cpp deleted file mode 100644 index 31d6ce6..0000000 --- a/Lib_I2C.cpp +++ /dev/null @@ -1,728 +0,0 @@ -/* - I2C.cpp - I2C library - Copyright (c) 2011-2012 Wayne Truchsess. All right reserved. - Rev 5.0 - January 24th, 2012 - - Removed the use of interrupts completely from the library - so TWI state changes are now polled. - - Added calls to lockup() function in most functions - to combat arbitration problems - - Fixed scan() procedure which left timeouts enabled - and set to 80msec after exiting procedure - - Changed scan() address range back to 0 - 0x7F - - Removed all Wire legacy functions from library - - A big thanks to Richard Baldwin for all the testing - and feedback with debugging bus lockups! - Rev 4.0 - January 14th, 2012 - - Updated to make compatible with 8MHz clock frequency - Rev 3.0 - January 9th, 2012 - - Modified library to be compatible with Arduino 1.0 - - Changed argument type from boolean to uint8_t in pullUp(), - setSpeed() and receiveByte() functions for 1.0 compatability - - Modified return values for timeout feature to report - back where in the transmission the timeout occured. - - added function scan() to perform a bus scan to find devices - attached to the I2C bus. Similar to work done by Todbot - and Nick Gammon - Rev 2.0 - September 19th, 2011 - - Added support for timeout function to prevent - and recover from bus lockup (thanks to PaulS - and CrossRoads on the Arduino forum) - - Changed return type for stop() from void to - uint8_t to handle timeOut function - Rev 1.0 - August 8th, 2011 - - This is a modified version of the Arduino Wire/TWI - library. Functions were rewritten to provide more functionality - and also the use of Repeated Start. Some I2C devices will not - function correctly without the use of a Repeated Start. The - initial version of this library only supports the Master. - - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -*/ - -#if(ARDUINO >= 100) -#include -#else -#include -#endif - -#include -#include "Lib_I2C.h" - -uint8_t I2C::bytesAvailable = 0; -uint8_t I2C::bufferIndex = 0; -uint8_t I2C::totalBytes = 0; -uint16_t I2C::timeOutDelay = 0; - -I2C::I2C() -{ -} - -////////////// Public Methods //////////////////////////////////////// - -void I2C::begin() -{ - #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__) - // activate internal pull-ups for twi - // as per note from atmega8 manual pg167 - sbi(PORTC, 4); - sbi(PORTC, 5); - #else - // activate internal pull-ups for twi - // as per note from atmega128 manual pg204 - sbi(PORTD, 0); - sbi(PORTD, 1); - #endif - // initialize twi prescaler and bit rate - cbi(TWSR, TWPS0); - cbi(TWSR, TWPS1); - TWBR = ((F_CPU / 100000) - 16) / 2; - // enable twi module and acks - TWCR = _BV(TWEN) | _BV(TWEA); -} - -void I2C::end() -{ - TWCR = 0; -} - -void I2C::timeOut(uint16_t _timeOut) -{ - timeOutDelay = _timeOut; -} - -void I2C::setSpeed(uint8_t _fast) -{ - if(!_fast) - { - TWBR = ((F_CPU / 100000) - 16) / 2; - } - else - { - TWBR = ((F_CPU / 400000) - 16) / 2; - } -} - -void I2C::pullup(uint8_t activate) -{ - if(activate) - { - #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__) - // activate internal pull-ups for twi - // as per note from atmega8 manual pg167 - sbi(PORTC, 4); - sbi(PORTC, 5); - #else - // activate internal pull-ups for twi - // as per note from atmega128 manual pg204 - sbi(PORTD, 0); - sbi(PORTD, 1); - #endif - } - else - { - #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega8__) || defined(__AVR_ATmega328P__) - // deactivate internal pull-ups for twi - // as per note from atmega8 manual pg167 - cbi(PORTC, 4); - cbi(PORTC, 5); - #else - // deactivate internal pull-ups for twi - // as per note from atmega128 manual pg204 - cbi(PORTD, 0); - cbi(PORTD, 1); - #endif - } -} - -void I2C::scan() -{ - uint16_t tempTime = timeOutDelay; - timeOut(80); - uint8_t totalDevicesFound = 0; - Serial.println(F("Scanning for devices...please wait")); - Serial.println(); - for(uint8_t s = 0; s <= 0x7F; s++) - { - returnStatus = 0; - returnStatus = start(); - if(!returnStatus) - { - returnStatus = sendAddress(SLA_W(s)); - } - if(returnStatus) - { - if(returnStatus == 1) - { - Serial.println(F("There is a problem with the bus, could not complete scan")); - timeOutDelay = tempTime; - return; - } - } - else - { - Serial.print(F("Found device at address - ")); - Serial.print(F(" 0x")); - Serial.println(s,HEX); - totalDevicesFound++; - } - stop(); - } - if(!totalDevicesFound){Serial.println(F("No devices found"));} - timeOutDelay = tempTime; -} - - -uint8_t I2C::available() -{ - return(bytesAvailable); -} - -uint8_t I2C::receive() -{ - bufferIndex = totalBytes - bytesAvailable; - if(!bytesAvailable) - { - bufferIndex = 0; - return(0); - } - bytesAvailable--; - return(data[bufferIndex]); -} - -/*return values for new functions that use the timeOut feature - will now return at what point in the transmission the timeout - occurred. Looking at a full communication sequence between a - master and slave (transmit data and then readback data) there - a total of 7 points in the sequence where a timeout can occur. - These are listed below and correspond to the returned value: - 1 - Waiting for successful completion of a Start bit - 2 - Waiting for ACK/NACK while addressing slave in transmit mode (MT) - 3 - Waiting for ACK/NACK while sending data to the slave - 4 - Waiting for successful completion of a Repeated Start - 5 - Waiting for ACK/NACK while addressing slave in receiver mode (MR) - 6 - Waiting for ACK/NACK while receiving data from the slave - 7 - Waiting for successful completion of the Stop bit - - All possible return values: - 0 Function executed with no errors - 1 - 7 Timeout occurred, see above list - 8 - 0xFF See datasheet for exact meaning */ - -///////////////////////////////////////////////////// - -uint8_t I2C::write(uint8_t address, uint8_t registerAddress) -{ - returnStatus = 0; - returnStatus = start(); - if(returnStatus){return(returnStatus);} - returnStatus = sendAddress(SLA_W(address)); - if(returnStatus) - { - if(returnStatus == 1){return(2);} - return(returnStatus); - } - returnStatus = sendByte(registerAddress); - if(returnStatus) - { - if(returnStatus == 1){return(3);} - return(returnStatus); - } - returnStatus = stop(); - if(returnStatus) - { - if(returnStatus == 1){return(7);} - return(returnStatus); - } - return(returnStatus); -} - -uint8_t I2C::write(int address, int registerAddress) -{ - return(write((uint8_t) address, (uint8_t) registerAddress)); -} - -uint8_t I2C::write(uint8_t address, uint8_t registerAddress, uint8_t data) -{ - returnStatus = 0; - returnStatus = start(); - if(returnStatus){return(returnStatus);} - returnStatus = sendAddress(SLA_W(address)); - if(returnStatus) - { - if(returnStatus == 1){return(2);} - return(returnStatus); - } - returnStatus = sendByte(registerAddress); - if(returnStatus) - { - if(returnStatus == 1){return(3);} - return(returnStatus); - } - returnStatus = sendByte(data); - if(returnStatus) - { - if(returnStatus == 1){return(3);} - return(returnStatus); - } - returnStatus = stop(); - if(returnStatus) - { - if(returnStatus == 1){return(7);} - return(returnStatus); - } - return(returnStatus); -} - -uint8_t I2C::write(int address, int registerAddress, int data) -{ - return(write((uint8_t) address, (uint8_t) registerAddress, (uint8_t) data)); -} - -uint8_t I2C::write(uint8_t address, uint8_t registerAddress, char *data) -{ - uint8_t bufferLength = strlen(data); - returnStatus = 0; - returnStatus = write(address, registerAddress, (uint8_t*)data, bufferLength); - return(returnStatus); -} - -uint8_t I2C::write(uint8_t address, uint8_t registerAddress, uint8_t *data, uint8_t numberBytes) -{ - returnStatus = 0; - returnStatus = start(); - if(returnStatus){return(returnStatus);} - returnStatus = sendAddress(SLA_W(address)); - if(returnStatus) - { - if(returnStatus == 1){return(2);} - return(returnStatus); - } - returnStatus = sendByte(registerAddress); - if(returnStatus) - { - if(returnStatus == 1){return(3);} - return(returnStatus); - } - for (uint8_t i = 0; i < numberBytes; i++) - { - returnStatus = sendByte(data[i]); - if(returnStatus) - { - if(returnStatus == 1){return(3);} - return(returnStatus); - } - } - returnStatus = stop(); - if(returnStatus) - { - if(returnStatus == 1){return(7);} - return(returnStatus); - } - return(returnStatus); -} - -uint8_t I2C::read(int address, int numberBytes) -{ - return(read((uint8_t) address, (uint8_t) numberBytes)); -} - -uint8_t I2C::read(uint8_t address, uint8_t numberBytes) -{ - bytesAvailable = 0; - bufferIndex = 0; - if(numberBytes == 0){numberBytes++;} - nack = numberBytes - 1; - returnStatus = 0; - returnStatus = start(); - if(returnStatus){return(returnStatus);} - returnStatus = sendAddress(SLA_R(address)); - if(returnStatus) - { - if(returnStatus == 1){return(5);} - return(returnStatus); - } - for(uint8_t i = 0; i < numberBytes; i++) - { - if( i == nack ) - { - returnStatus = receiveByte(0); - if(returnStatus == 1){return(6);} - - if(returnStatus != MR_DATA_NACK){return(returnStatus);} - } - else - { - returnStatus = receiveByte(1); - if(returnStatus == 1){return(6);} - if(returnStatus != MR_DATA_ACK){return(returnStatus);} - } - data[i] = TWDR; - bytesAvailable = i+1; - totalBytes = i+1; - } - returnStatus = stop(); - if(returnStatus) - { - if(returnStatus == 1){return(7);} - return(returnStatus); - } - return(returnStatus); -} - -uint8_t I2C::read(int address, int registerAddress, int numberBytes) -{ - return(read((uint8_t) address, (uint8_t) registerAddress, (uint8_t) numberBytes)); -} - -uint8_t I2C::read(uint8_t address, uint8_t registerAddress, uint8_t numberBytes) -{ - bytesAvailable = 0; - bufferIndex = 0; - if(numberBytes == 0){numberBytes++;} - nack = numberBytes - 1; - returnStatus = 0; - returnStatus = start(); - if(returnStatus){return(returnStatus);} - returnStatus = sendAddress(SLA_W(address)); - if(returnStatus) - { - if(returnStatus == 1){return(2);} - return(returnStatus); - } - returnStatus = sendByte(registerAddress); - if(returnStatus) - { - if(returnStatus == 1){return(3);} - return(returnStatus); - } - returnStatus = start(); - if(returnStatus) - { - if(returnStatus == 1){return(4);} - return(returnStatus); - } - returnStatus = sendAddress(SLA_R(address)); - if(returnStatus) - { - if(returnStatus == 1){return(5);} - return(returnStatus); - } - for(uint8_t i = 0; i < numberBytes; i++) - { - if( i == nack ) - { - returnStatus = receiveByte(0); - if(returnStatus == 1){return(6);} - if(returnStatus != MR_DATA_NACK){return(returnStatus);} - } - else - { - returnStatus = receiveByte(1); - if(returnStatus == 1){return(6);} - if(returnStatus != MR_DATA_ACK){return(returnStatus);} - } - data[i] = TWDR; - bytesAvailable = i+1; - totalBytes = i+1; - } - returnStatus = stop(); - if(returnStatus) - { - if(returnStatus == 1){return(7);} - return(returnStatus); - } - return(returnStatus); -} - -uint8_t I2C::read(uint8_t address, uint8_t numberBytes, uint8_t *dataBuffer) -{ - bytesAvailable = 0; - bufferIndex = 0; - if(numberBytes == 0){numberBytes++;} - nack = numberBytes - 1; - returnStatus = 0; - returnStatus = start(); - if(returnStatus){return(returnStatus);} - returnStatus = sendAddress(SLA_R(address)); - if(returnStatus) - { - if(returnStatus == 1){return(5);} - return(returnStatus); - } - for(uint8_t i = 0; i < numberBytes; i++) - { - if( i == nack ) - { - returnStatus = receiveByte(0); - if(returnStatus == 1){return(6);} - if(returnStatus != MR_DATA_NACK){return(returnStatus);} - } - else - { - returnStatus = receiveByte(1); - if(returnStatus == 1){return(6);} - if(returnStatus != MR_DATA_ACK){return(returnStatus);} - } - dataBuffer[i] = TWDR; - bytesAvailable = i+1; - totalBytes = i+1; - } - returnStatus = stop(); - if(returnStatus) - { - if(returnStatus == 1){return(7);} - return(returnStatus); - } - return(returnStatus); -} - -uint8_t I2C::read(uint8_t address, uint8_t registerAddress, uint8_t numberBytes, uint8_t *dataBuffer) -{ - bytesAvailable = 0; - bufferIndex = 0; - if(numberBytes == 0){numberBytes++;} - nack = numberBytes - 1; - returnStatus = 0; - returnStatus = start(); - if(returnStatus){return(returnStatus);} - returnStatus = sendAddress(SLA_W(address)); - if(returnStatus) - { - if(returnStatus == 1){return(2);} - return(returnStatus); - } - returnStatus = sendByte(registerAddress); - if(returnStatus) - { - if(returnStatus == 1){return(3);} - return(returnStatus); - } - returnStatus = start(); - if(returnStatus) - { - if(returnStatus == 1){return(4);} - return(returnStatus); - } - returnStatus = sendAddress(SLA_R(address)); - if(returnStatus) - { - if(returnStatus == 1){return(5);} - return(returnStatus); - } - for(uint8_t i = 0; i < numberBytes; i++) - { - if( i == nack ) - { - returnStatus = receiveByte(0); - if(returnStatus == 1){return(6);} - if(returnStatus != MR_DATA_NACK){return(returnStatus);} - } - else - { - returnStatus = receiveByte(1); - if(returnStatus == 1){return(6);} - if(returnStatus != MR_DATA_ACK){return(returnStatus);} - } - dataBuffer[i] = TWDR; - bytesAvailable = i+1; - totalBytes = i+1; - } - returnStatus = stop(); - if(returnStatus) - { - if(returnStatus == 1){return(7);} - return(returnStatus); - } - return(returnStatus); -} - -/////////////// Private Methods //////////////////////////////////////// - -uint8_t I2C::start() -{ - unsigned long startingTime = millis(); - TWCR = (1 << TWINT) | (1 << TWSTA) | (1 << TWEN); - while (!(TWCR & (1 << TWINT))) - { - if(!timeOutDelay){continue;} - if((millis() - startingTime) >= timeOutDelay) - { - lockUp(); - return(1); - } - - } - if ((TWI_STATUS == START) || (TWI_STATUS == REPEATED_START)) - { - return(0); - } - if (TWI_STATUS == LOST_ARBTRTN) - { - uint8_t bufferedStatus = TWI_STATUS; - lockUp(); - return(bufferedStatus); - } - return(TWI_STATUS); -} - -uint8_t I2C::sendAddress(uint8_t i2cAddress) -{ - TWDR = i2cAddress; - unsigned long startingTime = millis(); - TWCR = (1 << TWINT) | (1 << TWEN); - while (!(TWCR & (1 << TWINT))) - { - if(!timeOutDelay){continue;} - if((millis() - startingTime) >= timeOutDelay) - { - lockUp(); - return(1); - } - - } - if ((TWI_STATUS == MT_SLA_ACK) || (TWI_STATUS == MR_SLA_ACK)) - { - return(0); - } - uint8_t bufferedStatus = TWI_STATUS; - if ((TWI_STATUS == MT_SLA_NACK) || (TWI_STATUS == MR_SLA_NACK)) - { - stop(); - return(bufferedStatus); - } - else - { - lockUp(); - return(bufferedStatus); - } -} - -uint8_t I2C::sendByte(uint8_t i2cData) -{ - TWDR = i2cData; - unsigned long startingTime = millis(); - TWCR = (1 << TWINT) | (1 << TWEN); - while (!(TWCR & (1 << TWINT))) - { - if(!timeOutDelay){continue;} - if((millis() - startingTime) >= timeOutDelay) - { - lockUp(); - return(1); - } - - } - if (TWI_STATUS == MT_DATA_ACK) - { - return(0); - } - uint8_t bufferedStatus = TWI_STATUS; - if (TWI_STATUS == MT_DATA_NACK) - { - stop(); - return(bufferedStatus); - } - else - { - lockUp(); - return(bufferedStatus); - } -} - -uint8_t I2C::receiveByte(uint8_t ack) -{ - unsigned long startingTime = millis(); - if(ack) - { - TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWEA); - - } - else - { - TWCR = (1 << TWINT) | (1 << TWEN); - } - while (!(TWCR & (1 << TWINT))) - { - if(!timeOutDelay){continue;} - if((millis() - startingTime) >= timeOutDelay) - { - lockUp(); - return(1); - } - } - if (TWI_STATUS == LOST_ARBTRTN) - { - uint8_t bufferedStatus = TWI_STATUS; - lockUp(); - return(bufferedStatus); - } - return(TWI_STATUS); -} - -uint8_t I2C::receiveByte(uint8_t ack, uint8_t *target) -{ - uint8_t stat = I2C::receiveByte(ack); - if (stat == 1) - { - return(6); - } - if (ack) - { - if(stat != MR_DATA_ACK) - { - *target = 0x0; - return(stat); - } - } - else - { - if(stat != MR_DATA_NACK) - { - *target = 0x0; - return(stat); - } - } - *target = TWDR; - // I suppose that if we get this far we're ok - return 0; -} - -uint8_t I2C::stop() -{ - unsigned long startingTime = millis(); - TWCR = (1 << TWINT)|(1 << TWEN)| (1 << TWSTO); - while ((TWCR & (1 << TWSTO))) - { - if(!timeOutDelay){continue;} - if((millis() - startingTime) >= timeOutDelay) - { - lockUp(); - return(1); - } - - } - return(0); -} - -void I2C::lockUp() -{ - TWCR = 0; //releases SDA and SCL lines to high impedance - TWCR = _BV(TWEN) | _BV(TWEA); //reinitialize TWI -} - -I2C I2c = I2C(); - diff --git a/Lib_I2C.h b/Lib_I2C.h deleted file mode 100644 index 52999e1..0000000 --- a/Lib_I2C.h +++ /dev/null @@ -1,76 +0,0 @@ -#if(ARDUINO >= 100) -#include -#else -#include -#endif - -#include - -#ifndef I2C_h -#define I2C_h - -#define START 0x08 -#define REPEATED_START 0x10 -#define MT_SLA_ACK 0x18 -#define MT_SLA_NACK 0x20 -#define MT_DATA_ACK 0x28 -#define MT_DATA_NACK 0x30 -#define MR_SLA_ACK 0x40 -#define MR_SLA_NACK 0x48 -#define MR_DATA_ACK 0x50 -#define MR_DATA_NACK 0x58 -#define LOST_ARBTRTN 0x38 -#define TWI_STATUS (TWSR & 0xF8) -#define SLA_W(address) (address << 1) -#define SLA_R(address) ((address << 1) + 0x01) -#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) - -#define MAX_BUFFER_SIZE 32 - -class I2C -{ - public: - I2C(); - void begin(); - void end(); - void timeOut(uint16_t); - void setSpeed(uint8_t); - void pullup(uint8_t); - void scan(); - uint8_t available(); - uint8_t receive(); - uint8_t write(uint8_t, uint8_t); - uint8_t write(int, int); - uint8_t write(uint8_t, uint8_t, uint8_t); - uint8_t write(int, int, int); - uint8_t write(uint8_t, uint8_t, char*); - uint8_t write(uint8_t, uint8_t, uint8_t*, uint8_t); - uint8_t read(uint8_t, uint8_t); - uint8_t read(int, int); - uint8_t read(uint8_t, uint8_t, uint8_t); - uint8_t read(int, int, int); - uint8_t read(uint8_t, uint8_t, uint8_t*); - uint8_t read(uint8_t, uint8_t, uint8_t, uint8_t*); - - uint8_t start(); - uint8_t sendAddress(uint8_t); - uint8_t sendByte(uint8_t); - uint8_t receiveByte(uint8_t); - uint8_t receiveByte(uint8_t, uint8_t *target); - uint8_t stop(); - private: - void lockUp(); - uint8_t returnStatus; - uint8_t nack; - uint8_t data[MAX_BUFFER_SIZE]; - static uint8_t bytesAvailable; - static uint8_t bufferIndex; - static uint8_t totalBytes; - static uint16_t timeOutDelay; - -}; - -extern I2C I2c; - -#endif diff --git a/examples/DFRobot_AS3935_lightning_sensor_detailed/DFRobot_AS3935_lightning_sensor_detailed.ino b/examples/DFRobot_AS3935_lightning_sensor_detailed/DFRobot_AS3935_lightning_sensor_detailed.ino index 30d0618..67a3c72 100644 --- a/examples/DFRobot_AS3935_lightning_sensor_detailed/DFRobot_AS3935_lightning_sensor_detailed.ino +++ b/examples/DFRobot_AS3935_lightning_sensor_detailed/DFRobot_AS3935_lightning_sensor_detailed.ino @@ -13,16 +13,22 @@ Copyright [DFRobot](http://www.dfrobot.com), 2018 Copyright GNU Lesser General Public License - version V1.0 - date 2018-11-28 + version V1.1 + date 2021-08-24 */ -#include "Lib_I2C.h" #include "DFRobot_AS3935_I2C.h" volatile int8_t AS3935IsrTrig = 0; -#define IRQ_PIN 2 + +#if defined(ESP32) || defined(ESP8266) +#define IRQ_PIN 0 +#else +#define IRQ_PIN 2 +#endif + + // Antenna tuning capcitance (must be integer multiple of 8, 8 - 120 pf) #define AS3935_CAPACITANCE 96 @@ -40,18 +46,14 @@ void setup() Serial.begin(115200); Serial.println("DFRobot AS3935 lightning sensor begin!"); - // Setup for the the I2C library: (enable pullups, set speed to 400kHz) - I2c.begin(); - I2c.pullup(true); - I2c.setSpeed(1); - delay(2); - lightning0.setI2CAddress(AS3935_ADD3); - // Set registers to default - if(lightning0.defInit() != 0){ - Serial.println("I2C init fail"); - while(1){} + + while (lightning0.begin() != 0) + { + Serial.print("."); } + lightning0.defInit(); + // Configure sensor lightning0.powerUp(); @@ -64,12 +66,18 @@ void setup() //lightning0.disturberDis(); lightning0.setIRQOutputSource(0); + + #if defined(ESP32) || defined(ESP8266) + attachInterrupt(digitalPinToInterrupt(IRQ_PIN),AS3935_ISR,RISING); + #else + attachInterrupt(/*Interrupt No*/0,AS3935_ISR,RISING); + #endif delay(500); //set capacitance lightning0.setTuningCaps(AS3935_CAPACITANCE); Serial.println("AS3935 manual cal complete"); - // Enable interrupt (connect IRQ pin IRQ_PIN: 2, default) +// Enable interrupt (connect IRQ pin IRQ_PIN: 2, default) // Connect the IRQ and GND pin to the oscilloscope. // uncomment the following sentences to fine tune the antenna for better performance. // This will dispaly the antenna's resonance frequency/16 on IRQ pin (The resonance frequency will be divided by 16 on this pin) @@ -85,23 +93,20 @@ void setup() lightning0.setWatchdogThreshold(2); //uint8_t wtdgThreshold = lightning0.getWatchdogThreshold(); -//used to modify SREJ (spike rejection),values should only be between 0x00 and 0x0F (0 and 7) + //used to modify SREJ (spike rejection),values should only be between 0x00 and 0x0F (0 and 7) lightning0.setSpikeRejection(2); //uint8_t spikeRejection = lightning0.getSpikeRejection(); - - attachInterrupt(0, AS3935_ISR, RISING); - } void loop() { // It does nothing until an interrupt is detected on the IRQ pin. - while (AS3935IsrTrig == 0) {} + while (AS3935IsrTrig == 0) {delay(1);} delay(5); - + // Reset interrupt flag AS3935IsrTrig = 0; - + // Get interrupt source uint8_t intSrc = lightning0.getInterruptSrc(); if (intSrc == 1) @@ -137,4 +142,3 @@ void AS3935_ISR() { AS3935IsrTrig = 1; } - diff --git a/examples/DFRobot_AS3935_lightning_sensor_ordinary/DFRobot_AS3935_lightning_sensor_ordinary.ino b/examples/DFRobot_AS3935_lightning_sensor_ordinary/DFRobot_AS3935_lightning_sensor_ordinary.ino index 1c4a9c8..27949db 100644 --- a/examples/DFRobot_AS3935_lightning_sensor_ordinary/DFRobot_AS3935_lightning_sensor_ordinary.ino +++ b/examples/DFRobot_AS3935_lightning_sensor_ordinary/DFRobot_AS3935_lightning_sensor_ordinary.ino @@ -12,16 +12,19 @@ Copyright [DFRobot](http://www.dfrobot.com), 2018 Copyright GNU Lesser General Public License - version V1.0 - date 2018-11-28 + version V1.1 + date 2021-08-24 */ -#include "Lib_I2C.h" #include "DFRobot_AS3935_I2C.h" volatile int8_t AS3935IsrTrig = 0; -#define IRQ_PIN 2 +#if defined(ESP32) || defined(ESP8266) +#define IRQ_PIN 0 +#else +#define IRQ_PIN 2 +#endif // Antenna tuning capcitance (must be integer multiple of 8, 8 - 120 pf) #define AS3935_CAPACITANCE 96 @@ -49,17 +52,18 @@ void setup() Serial.begin(115200); Serial.println("DFRobot AS3935 lightning sensor begin!"); - // Setup for the the I2C library: (enable pullups, set speed to 400kHz) - I2c.begin(); - I2c.pullup(true); - I2c.setSpeed(1); - delay(2); - - // Set registers to default - if(lightning0.defInit() != 0){ - Serial.println("I2C init fail"); - while(1){} + while (lightning0.begin() != 0) + { + Serial.print("."); } + lightning0.defInit(); + + #if defined(ESP32) || defined(ESP8266) + attachInterrupt(digitalPinToInterrupt(IRQ_PIN),AS3935_ISR,RISING); + #else + attachInterrupt(/*Interrupt No*/0,AS3935_ISR,RISING); + #endif + // Configure sensor lightning0.manualCal(AS3935_CAPACITANCE, AS3935_MODE, AS3935_DIST); // Enable interrupt (connect IRQ pin IRQ_PIN: 2, default) @@ -71,14 +75,12 @@ void setup() // lightning0.setLcoFdiv(0); // lightning0.setIRQOutputSource(3); - attachInterrupt(0, AS3935_ISR, RISING); - } void loop() { // It does nothing until an interrupt is detected on the IRQ pin. - while (AS3935IsrTrig == 0) {} + while (AS3935IsrTrig == 0) {delay(1);} delay(5); // Reset interrupt flag diff --git a/readme.md b/readme.md index 09a9283..07adc41 100644 --- a/readme.md +++ b/readme.md @@ -193,7 +193,8 @@ uint8_t getSpikeRejection(void); MCU | Work Well | Work Wrong | Untested | Remarks ------------------ | :----------: | :----------: | :---------: | ----- -Arduino uno | √ | | | +Arduino uno | √ | | | + esp8266 | √ | | | ## Credits