# AS3935
AS3935 Lightning Sensor can detect lightning and display the distance and intensity of the lightning without the disturbance of electric arc and noise.< br >
It can be set as indoor or outdoor mode.< br >
## DFRobot_AS3934 Library for Arduino
---------------------------------------------------------
Provide a library faciltates operations in the as3935 modules.
## Table of Contents
* [Summary ](#summary )
* [Feature ](#feature )
* [Installation ](#installation )
* [Methods ](#methods )
* [Compatibility ](#compatibility )
* [Credits ](#credits )
< snippet >
< content >
## Summary
Input commands and read data from AS3935 modules
## Feature
1. Lightning sensor warns of lightning storm activity within a radius of 40km < br >
2. Distance estimation to the head of the storm from overhead to 40km in 15 steps < br >
3. Detects both cloud-to-ground and intra-cloud(cloud-to-cloud) flashes < br >
4. Embedded man-made disturber rejection algorithm < br >
5. Programmable detection levels enable threshold setting for optimal controls < br >
6. Three i2c interfaces, switch freely to avoid site conflicts < br >
## Installation
Download the library ZIP file and unzip it to the Arduino folder of the library.< br >
## Methods
```C++
#include "DFRobot_AS3935_I2C.h"
/*
* @brief AS3935 object
*
* @param irqx irq pin
* devAddx i2c address
*/
DFRobot_AS3935_I2C(uint8_t irqx, uint8_t devAddx);
/*
* @brief reset registers to default
*/
void defInit(void);
/*
* @brief set i2c address
*
* @param devAddx i2c address
*/
void setI2CAddress(uint8_t devAddx);
/*
* @brief manual calibration
*
* @param capacitance capacitance
* location location
* disturber disturber
*/
void manualCal(uint8_t capacitance, uint8_t location, uint8_t disturber);
/*
* @brief view register data
*/
void printAllRegs(void);
/*
* @brief get interrupt source
*
* @return 0 interrupt result not expected
* 1 lightning caused interrupt
* 2 disturber detected
* 3 Noise level too high
*/
uint8_t getInterruptSrc(void);
/*
* @brief get lightning distance
*
* @return unit kilometer
*/
uint8_t getLightningDistKm(void);
/*
* @brief get lightning energy intensity
*
* @return lightning energy intensity(0-1000)
*/
uint32_t getStrikeEnergyRaw(void);
/*
* @brief Set to the outdoor model
*/
void setOutdoors(void);
/*
* @brief Set to the indoor model
*/
void setIndoors(void);
/*
* @brief Disturber detection enabled
*/
void disturberEn(void);
/*
* @brief Disturber detection disenabled
*/
void disturberDis(void);
/*
* @brief Sets LCO_FDIV register
*
* @param fdiv Set 0, 1, 2 or 3 for ratios of 16, 32, 64 and 128, respectively
*/
void setLcoFdiv(uint8_t fdiv);
/*
* @brief Set interrupt source
*
* @param irqSelect 0 = NONE, 1 = TRCO, 2 = SRCO, 3 = LCO
*/
void setIRQOutputSource(uint8_t irqSelect);
```
## Compatibility
MCU | Work Well | Work Wrong | Untested | Remarks
------------------ | :----------: | :----------: | :---------: | -----
Arduino uno | √ | | |
## Credits
Written by DFRobot_JH, 2018. (Welcome to our [website ](https://www.dfrobot.com/ ))
