You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
BA_MicroMDAEPiano/config.h

136 lines
4.3 KiB

/*
MicroMDAEPiano
MicroMDAEPiano is a port of the MDA-EPiano sound engine
(https://sourceforge.net/projects/mda-vst/) for the Teensy-3.5/3.6 with audio shield.
(c)2019 H. Wirtz <wirtz@parasitstudio.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef CONFIG_H_INCLUDED
#define CONFIG_H_INCLUDED
#include "midinotes.h"
// ATTENTION! For better latency you have to redefine AUDIO_BLOCK_SAMPLES from
// 128 to 64 in <ARDUINO-IDE-DIR>/cores/teensy3/AudioStream.h
//*************************************************************************************************
//* DEVICE SETTINGS
//*************************************************************************************************
// MIDI
//#define MIDI_DEVICE_DIN Serial1
#define MIDI_DEVICE_USB 1
#define MIDI_DEVICE_USB_HOST 1
// AUDIO
//#define TEENSY_AUDIO_BOARD 1
//*************************************************************************************************
//* MIDI SETTINGS
//*************************************************************************************************
#define DEFAULT_MIDI_CHANNEL MIDI_CHANNEL_OMNI
#define MIDI_MERGE_THRU 1
//*************************************************************************************************
//* AUDIO SETTINGS
//*************************************************************************************************
#define VOLUME 0.8
#define AUDIO_MEM 128
#define SAMPLE_RATE 44100
#define REDUCE_LOUDNESS 1
#define USE_XFADE_DATA 1
//*************************************************************************************************
//* DEBUG OUTPUT SETTINGS
//*************************************************************************************************
#define DEBUG 1
#define SERIAL_SPEED 38400
//#define SHOW_MIDI_EVENT 1
#define SHOW_XRUN 1
#define SHOW_CPU_LOAD_MSEC 5000
//*************************************************************************************************
//* HARDWARE SETTINGS
//*************************************************************************************************
// Teensy Audio Shield:
//#define SDCARD_CS_PIN 10
//#define SDCARD_MOSI_PIN 7
//#define SDCARD_SCK_PIN 14
// Teensy 3.5 & 3.6 SD card
#define SDCARD_CS_PIN BUILTIN_SDCARD
#define SDCARD_MOSI_PIN 11 // not actually used
#define SDCARD_SCK_PIN 13 // not actually used
// Encoder with button
#define NUM_ENCODER 2
#define ENC_L_PIN_A 3
#define ENC_L_PIN_B 2
#define BUT_L_PIN 4
#define INITIAL_ENC_L_VALUE 0
#define ENC_R_PIN_A 28
#define ENC_R_PIN_B 29
#define BUT_R_PIN 30
#define INITIAL_ENC_R_VALUE 0
#define BUT_DEBOUNCE_MS 20
#define LONG_BUTTON_PRESS 500
// LCD display (I2C)
// [I2C] SCL: Pin 19, SDA: Pin 18 (https://www.pjrc.com/teensy/td_libs_Wire.html)
#define LCD_I2C_ADDRESS 0x27
#define LCD_CHARS 16
#define LCD_LINES 2
// EEPROM address
#define EEPROM_OFFSET 0
#define EEPROM_DATA_LENGTH 5
#define EEPROM_CRC32_ADDR EEPROM.length()-sizeof(uint32_t)
#define EEPROM_BANK_ADDR 0
#define EEPROM_VOICE_ADDR 1
#define EEPROM_MASTER_VOLUME_ADDR 2
#define EEPROM_VOLUME_RIGHT_ADDR 3
#define EEPROM_VOLUME_LEFT_ADDR 4
//*************************************************************************************************
//* DO NO CHANGE ANYTHING BEYOND IF YOU DON'T KNOW WHAT YOU ARE DOING !!!
//*************************************************************************************************
// MIDI
#ifdef MIDI_DEVICE_USB
#define USBCON 1
#endif
#if defined(__MK66FX1M0__)
// Teensy-3.6 settings
#define MIDI_DEVICE_USB_HOST 1
#else
// Teensy-3.5 settings
#undef MIDI_DEVICE_USB_HOST
#endif
// Engine
#if defined(__MK66FX1M0__)
// Teensy-3.6 settings
#define NVOICES 64
#else
#define NVOICES 32
#endif
#endif