wirtz
/
BA_MicroMDAEPiano
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Added the frame for the instrument. There is much missing: MIDI->engine and engine->audio_output communication is still not implemented.

Browse Source
chorus
Holger Wirtz 6 years ago
parent e8f37a99be
commit 0a5735035f
4 changed files with 764 additions and 32 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 744
      MicroMDAPiano.ino
  2. 13
      config.h
  3. 11
      mdaEPiano.cpp
  4. 28
      mdaEPiano.h

744
MicroMDAPiano.ino
Unescape View File

@ -1,22 +1,738 @@
#include <Audio.h>
#include <Wire.h>
#include <SPI.h>
#include <SD.h>
#include <MIDI.h>
#include <EEPROM.h>
#include <limits.h>
#include "mdaEPiano.h"
#include "mdaEPianoData.h"
#include "config.h"
#ifdef USE_ONBOARD_USB_HOST
#include <USBHost_t36.h>
#endif
#ifndef MASTER_KEY_MIDI // selecting sounds by encoder, button and display
#include <Bounce.h>
#include <Encoder.h>
#include <LiquidCrystalPlus_I2C.h>
#endif
void setup() {
Serial.begin(38400);
delay(500);
Serial.println("START");
Serial.println(sizeof(epianoData),DEC);
uint32_t i;
for(i=0;i<sizeof(epianoData)/sizeof(uint16_t); i++)
#ifndef MASTER_KEY_MIDI
// [I2C] SCL: Pin 19, SDA: Pin 18 (https://www.pjrc.com/teensy/td_libs_Wire.html)
#define LCD_I2C_ADDRESS 0x27
#define LCD_CHARS 16
#define LCD_LINES 2
LiquidCrystalPlus_I2C lcd(LCD_I2C_ADDRESS, LCD_CHARS, LCD_LINES);
Encoder enc1(ENC1_PIN_A, ENC1_PIN_B);
Bounce but1 = Bounce(BUT1_PIN, 10); // 10 ms debounce
#endif
// GUItool: begin automatically generated code
AudioPlayQueue queue1; //xy=494,404
AudioAnalyzePeak peak1; //xy=695,491
#ifdef TEENSY_AUDIO_BOARD
AudioOutputI2S i2s1; //xy=1072,364
AudioConnection patchCord1(queue1, peak1);
AudioConnection patchCord2(queue1, 0, i2s1, 0);
AudioConnection patchCord3(queue1, 0, i2s1, 1);
AudioControlSGTL5000 sgtl5000_1; //xy=700,536
#else
AudioOutputPT8211 pt8211_1; //xy=1079,320
AudioAmplifier volume_master; //xy=678,393
AudioAmplifier volume_r; //xy=818,370
AudioAmplifier volume_l; //xy=818,411
AudioConnection patchCord1(queue1, peak1);
AudioConnection patchCord2(queue1, volume_master);
AudioConnection patchCord3(volume_master, volume_r);
AudioConnection patchCord4(volume_master, volume_l);
AudioConnection patchCord5(volume_r, 0, pt8211_1, 0);
AudioConnection patchCord6(volume_l, 0, pt8211_1, 1);
#endif
// GUItool: end automatically generated code
mdaEPiano* ep = new mdaEPiano();
bool sd_card_available = false;
uint8_t midi_channel = DEFAULT_MIDI_CHANNEL;
uint32_t xrun = 0;
uint32_t overload = 0;
uint32_t peak = 0;
uint16_t render_time_max = 0;
uint8_t bank = 0;
uint8_t voice = 0;
float vol = VOLUME;
float vol_right = 1.0;
float vol_left = 1.0;
#ifdef MASTER_KEY_MIDI
bool master_key_enabled = false;
#endif
#ifdef SHOW_CPU_LOAD_MSEC
elapsedMillis cpu_mem_millis;
#endif
#ifdef MIDI_DEVICE
MIDI_CREATE_INSTANCE(HardwareSerial, MIDI_DEVICE, midi_serial);
#endif
#ifdef USE_ONBOARD_USB_HOST
USBHost usb_host;
MIDIDevice midi_usb(usb_host);
#endif
#ifdef TEST_NOTE
IntervalTimer sched_note_on;
IntervalTimer sched_note_off;
uint8_t _voice_counter = 0;
#endif
void setup()
{
//while (!Serial) ; // wait for Arduino Serial Monitor
Serial.begin(SERIAL_SPEED);
delay(220);
#ifndef MASTER_KEY_MIDI
lcd.init();
lcd.blink_off();
lcd.cursor_off();
lcd.backlight();
lcd.noAutoscroll();
lcd.clear();
lcd.display();
lcd.show(0, 0, 20, "MicroDexed");
enc1.write(INITIAL_ENC1_VALUE);
#endif
Serial.println(F("MicroMDAEPiano based on https://sourceforge.net/projects/mda-vst"));
Serial.println(F("(c)2018 H. Wirtz <wirtz@parasitstudio.de>"));
Serial.println(F("https://about.teahub.io/dcoredump/MicroMDAEpiano"));
Serial.print(F("Data in PROGMEM: "));
Serial.print(sizeof(epianoData), DEC);
Serial.println(F(" bytes"));
Serial.println();
Serial.println(F("<setup start>"));
initial_values_from_eeprom();
// start up USB host
#ifdef USE_ONBOARD_USB_HOST
usb_host.begin();
#endif
#ifdef MIDI_DEVICE
// Start serial MIDI
midi_serial.begin(DEFAULT_MIDI_CHANNEL);
#endif
// start audio card
AudioMemory(AUDIO_MEM);
#ifdef TEENSY_AUDIO_BOARD
sgtl5000_1.enable();
//sgtl5000_1.dacVolumeRamp();
sgtl5000_1.dacVolumeRampLinear();
sgtl5000_1.unmuteHeadphone();
sgtl5000_1.autoVolumeDisable(); // turn off AGC
sgtl5000_1.volume(1.0, 1.0);
#endif
//set_volume(vol, vol_left, vol_right);
// start SD card
SPI.setMOSI(SDCARD_MOSI_PIN);
SPI.setSCK(SDCARD_SCK_PIN);
if (!SD.begin(SDCARD_CS_PIN))
{
Serial.println(F("SD card not accessable"));
}
else
{
Serial.println(F("SD card found."));
sd_card_available = true;
}
#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
// Initialize processor and memory measurements
AudioProcessorUsageMaxReset();
AudioMemoryUsageMaxReset();
#endif
Serial.print(F("AUDIO_BLOCK_SAMPLES="));
Serial.print(AUDIO_BLOCK_SAMPLES);
Serial.print(F(" (Time per block="));
Serial.print(1000000 / (SAMPLE_RATE / AUDIO_BLOCK_SAMPLES));
Serial.println(F("ms)"));
#ifdef TEST_NOTE
Serial.println(F("MIDI test enabled"));
sched_note_on.begin(note_on, 2000000);
sched_note_off.begin(note_off, 6333333);
#endif
Serial.println(F("<setup end>"));
#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
show_cpu_and_mem_usage();
cpu_mem_millis = 0;
#endif
}
void loop()
{
int16_t* audio_buffer; // pointer to AUDIO_BLOCK_SAMPLES * int16_t
const uint16_t audio_block_time_ms = 1000000 / (SAMPLE_RATE / AUDIO_BLOCK_SAMPLES);
while (42 == 42) // DON'T PANIC!
{
#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
if (cpu_mem_millis > SHOW_CPU_LOAD_MSEC)
{
show_cpu_and_mem_usage();
cpu_mem_millis = 0;
}
#endif
handle_input();
audio_buffer = queue1.getBuffer();
if (audio_buffer == NULL)
{
Serial.println(F("E: audio_buffer allocation problems!"));
}
if (!queue1.available())
continue;
elapsedMicros t1;
//ep->process(AUDIO_BLOCK_SAMPLES, audio_buffer);
uint32_t t2 = t1;
if (t2 > audio_block_time_ms) // everything greater 2.9ms is a buffer underrun!
xrun++;
if (t2 > render_time_max)
render_time_max = t2;
if (peak1.available())
{
if (peak1.read() > 0.99)
peak++;
}
#ifndef TEENSY_AUDIO_BOARD
for (uint8_t i = 0; i <= AUDIO_BLOCK_SAMPLES; i++)
audio_buffer[i] *= vol;
#endif
queue1.playBuffer();
}
}
void handle_input(void)
{
#ifdef USE_ONBOARD_USB_HOST
usb_host.Task();
while (midi_usb.read())
{
#ifdef DEBUG
Serial.println(F("[MIDI-USB]"));
#endif
/* if (midi_usb.getType() >= 0xf0) // SysEX
{
handle_sysex_parameter(midi_usb.getSysExArray(), midi_usb.getSysExArrayLength());
}
else */ if (queue_midi_event(midi_usb.getType(), midi_usb.getData1(), midi_usb.getData2()))
return;
}
#endif
#ifdef MIDI_DEVICE
while (midi_serial.read())
{
#ifdef DEBUG
Serial.print(F("[MIDI-Serial] "));
#endif
/* if (midi_serial.getType() >= 0xf0) // SYSEX
{
handle_sysex_parameter(midi_serial.getSysExArray(), midi_serial.getSysExArrayLength());
}
else */ if (queue_midi_event(midi_serial.getType(), midi_serial.getData1(), midi_serial.getData2()))
return;
}
#endif
#ifndef MASTER_KEY_MIDI
int enc1_val = enc1.read();
if (but1.update())
;
// place handling of encoder and showing values on lcd here
#endif
}
#ifdef DEBUG
#ifdef SHOW_MIDI_EVENT
void print_midi_event(uint8_t type, uint8_t data1, uint8_t data2)
{
Serial.print(F("MIDI-Channel: "));
if (midi_channel == MIDI_CHANNEL_OMNI)
Serial.print(F("OMNI"));
else
Serial.print(midi_channel, DEC);
Serial.print(F(", MIDI event type: 0x"));
if (type < 16)
Serial.print(F("0"));
Serial.print(type, HEX);
Serial.print(F(", data1: "));
Serial.print(data1, DEC);
Serial.print(F(", data2: "));
Serial.println(data2, DEC);
#ifndef MASTER_KEY_MIDI
lcd.show(1, 0, 3, data1);
lcd.show(1, 4, 3, data2);
#endif
}
#endif
#endif
#ifdef MASTER_KEY_MIDI
bool handle_master_key(uint8_t data)
{
int8_t num = num_key_base_c(data);
#ifdef DEBUG
Serial.print(F("Master-Key: "));
Serial.println(num, DEC);
#endif
if (num > 0)
{
// a white key!
if (num <= 32)
{
if (load_sysex(bank, num))
{
#ifdef DEBUG
Serial.print(F("Loading voice number "));
Serial.println(num, DEC);
#endif
EEPROM.update(EEPROM_OFFSET + EEPROM_VOICE_ADDR, num);
update_eeprom_checksum();
}
#ifdef DEBUG
else
{
Serial.print(F("E: cannot load voice number "));
Serial.println(num, DEC);
}
#endif
}
return (true);
}
else
{
// a black key!
num = abs(num);
if (num <= 10)
{
set_volume(float(num * 0.1), vol_left, vol_right);
}
else if (num > 10 && num <= 20)
{
bank = num - 10;
EEPROM.update(EEPROM_OFFSET + EEPROM_BANK_ADDR, bank);
update_eeprom_checksum();
#ifdef DEBUG
Serial.print(F("Bank switch to: "));
Serial.println(bank, DEC);
#endif
return (true);
}
}
return (false);
}
#endif
bool load_sysex(uint8_t bank, uint8_t num)
{
return (true);
}
bool queue_midi_event(uint8_t type, uint8_t data1, uint8_t data2)
{
bool ret = false;
#if defined(DEBUG) && defined(SHOW_MIDI_EVENT)
print_midi_event(type, data1, data2);
#endif
// check for MIDI channel
if (midi_channel != MIDI_CHANNEL_OMNI)
{
uint8_t c = type & 0x0f;
if (c != midi_channel)
{
#ifdef DEBUG
Serial.print(F("Ignoring MIDI data on channel "));
Serial.print(c);
Serial.print(F("(listening on "));
Serial.print(midi_channel);
Serial.println(F(")"));
#endif
return (false);
}
}
// now throw away the MIDI channel information
type &= 0xf0;
#ifdef MASTER_KEY_MIDI
if (type == 0x80 && data1 == MASTER_KEY_MIDI) // Master key released
{
master_key_enabled = false;
#ifdef DEBUG
Serial.println(F("Master key disabled"));
#endif
}
else if (type == 0x90 && data1 == MASTER_KEY_MIDI) // Master key pressed
{
Serial.print(i,DEC);
Serial.print(F(" "));
Serial.println(epianoData[i], DEC);
master_key_enabled = true;
#ifdef DEBUG
Serial.println(F("Master key enabled"));
#endif
}
else
{
if (master_key_enabled)
{
if (type == 0x80) // handle when note is released
{
//dexed->notesOff();
handle_master_key(data1);
}
}
else
#endif
// ret = dexed->processMidiMessage(type, data1, data2); // TODO!!!
;
#ifdef MASTER_KEY_MIDI
}
#endif
return (ret);
}
#ifdef MASTER_KEY_MIDI
int8_t num_key_base_c(uint8_t midi_note)
{
int8_t num = 0;
switch (midi_note % 12)
{
// positive numbers are white keys, negative black ones
case 0:
num = 1;
break;
case 1:
num = -1;
break;
case 2:
num = 2;
break;
case 3:
num = -2;
break;
case 4:
num = 3;
break;
case 5:
num = 4;
break;
case 6:
num = -3;
break;
case 7:
num = 5;
break;
case 8:
num = -4;
break;
case 9:
num = 6;
break;
case 10:
num = -5;
break;
case 11:
num = 7;
break;
}
if (num > 0)
return (num + (((midi_note - MASTER_NUM1) / 12) * 7));
else
return (num + ((((midi_note - MASTER_NUM1) / 12) * 5) * -1));
}
#endif
void loop() {
Serial.println("LOOP");
delay(10000);
void set_volume(float v, float vr, float vl)
{
vol = v;
vol_right = vr;
vol_left = vl;
EEPROM.update(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR, uint8_t(vol * UCHAR_MAX));
EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR, uint8_t(vol_right * UCHAR_MAX));
EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR, uint8_t(vol_left * UCHAR_MAX));
update_eeprom_checksum();
#ifdef DEBUG
uint8_t tmp;
Serial.print(F("Setting volume: VOL="));
Serial.print(v, DEC);
Serial.print(F("["));
tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR);
Serial.print(tmp, DEC);
Serial.print(F("/"));
Serial.print(float(tmp) / UCHAR_MAX, DEC);
Serial.print(F("] VOL_L="));
Serial.print(vl, DEC);
Serial.print(F("["));
tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR);
Serial.print(tmp, DEC);
Serial.print(F("/"));
Serial.print(float(tmp) / UCHAR_MAX, DEC);
Serial.print(F("] VOL_R="));
Serial.print(vr, DEC);
Serial.print(F("["));
tmp = EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR);
Serial.print(tmp, DEC);
Serial.print(F("/"));
Serial.print(float(tmp) / UCHAR_MAX, DEC);
Serial.println(F("]"));
#endif
#ifdef TEENSY_AUDIO_BOARD
sgtl5000_1.dacVolume(vol * vol_left, vol * vol_right);
#else
volume_master.gain(vol);
volume_r.gain(vr);
volume_l.gain(vl);
#endif
}
/*
void handle_sysex_parameter(const uint8_t* sysex, uint8_t len)
{
if (sysex[1] != 0x43) // check for Yamaha sysex
{
#ifdef DEBUG
Serial.println(F("E: SysEx vendor not Yamaha."));
#endif
return;
}
// parse parameter change
if (len == 7)
{
if ((sysex[3] & 0x7c) != 0 || (sysex[3] & 0x7c) != 2)
{
#ifdef DEBUG
Serial.println(F("E: Not a SysEx parameter or function parameter change."));
#endif
return;
}
if (sysex[6] != 0xf7)
{
#ifdef DEBUG
Serial.println(F("E: SysEx end status byte not detected."));
#endif
return;
}
if ((sysex[3] & 0x7c) == 0)
{
dexed->data[sysex[4]] = sysex[5]; // set parameter
dexed->doRefreshVoice();
}
else
{
dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET - 63 + sysex[4]] = sysex[5]; // set function parameter
dexed->controllers.values_[kControllerPitchRange] = dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_PITCHBEND_RANGE];
dexed->controllers.values_[kControllerPitchStep] = dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_PITCHBEND_STEP];
dexed->controllers.wheel.setRange(dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_MODWHEEL_RANGE]);
dexed->controllers.wheel.setTarget(dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_MODWHEEL_ASSIGN]);
dexed->controllers.foot.setRange(dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_FOOTCTRL_RANGE]);
dexed->controllers.foot.setTarget(dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_FOOTCTRL_ASSIGN]);
dexed->controllers.breath.setRange(dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_BREATHCTRL_RANGE]);
dexed->controllers.breath.setTarget(dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_BREATHCTRL_ASSIGN]);
dexed->controllers.at.setRange(dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_AT_RANGE]);
dexed->controllers.at.setTarget(dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_AT_ASSIGN]);
dexed->controllers.masterTune = (dexed->data[DEXED_GLOBAL_PARAMETER_OFFSET + DEXED_MASTER_TUNE] * 0x4000 << 11) * (1.0 / 12);
dexed->controllers.refresh();
}
#ifdef DEBUG
Serial.print(F("SysEx"));
if ((sysex[3] & 0x7c) == 0)
Serial.print(F(" function"));
Serial.print(F(" parameter "));
Serial.print(sysex[4], DEC);
Serial.print(F(" = "));
Serial.println(sysex[5], DEC);
#endif
}
#ifdef DEBUG
else
Serial.println(F("E: SysEx parameter length wrong."));
#endif
}
*/
void initial_values_from_eeprom(void)
{
uint32_t crc_eeprom = read_eeprom_checksum();
uint32_t crc = eeprom_crc32(EEPROM_OFFSET, EEPROM_DATA_LENGTH);
#ifdef DEBUG
Serial.print(F("EEPROM checksum: 0x"));
Serial.print(crc_eeprom, HEX);
Serial.print(F(" / 0x"));
Serial.print(crc, HEX);
#endif
if (crc_eeprom != crc)
{
#ifdef DEBUG
Serial.print(F(" - mismatch -> initializing EEPROM!"));
#endif
EEPROM.update(EEPROM_OFFSET + EEPROM_BANK_ADDR, bank);
EEPROM.update(EEPROM_OFFSET + EEPROM_VOICE_ADDR, voice);
EEPROM.update(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR, uint8_t(vol * UCHAR_MAX));
EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR, uint8_t(vol_right * UCHAR_MAX));
EEPROM.update(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR, uint8_t(vol_left * UCHAR_MAX));
update_eeprom_checksum();
}
else
{
bank = EEPROM.read(EEPROM_OFFSET + EEPROM_BANK_ADDR);
voice = EEPROM.read(EEPROM_OFFSET + EEPROM_VOICE_ADDR);
vol = float(EEPROM.read(EEPROM_OFFSET + EEPROM_MASTER_VOLUME_ADDR)) / UCHAR_MAX;
vol_right = float(EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_RIGHT_ADDR)) / UCHAR_MAX;
vol_left = float(EEPROM.read(EEPROM_OFFSET + EEPROM_VOLUME_LEFT_ADDR)) / UCHAR_MAX;
}
#ifdef DEBUG
Serial.println();
#endif
}
uint32_t read_eeprom_checksum(void)
{
return (EEPROM.read(EEPROM_CRC32_ADDR) << 24 | EEPROM.read(EEPROM_CRC32_ADDR + 1) << 16 | EEPROM.read(EEPROM_CRC32_ADDR + 2) << 8 | EEPROM.read(EEPROM_CRC32_ADDR + 3));
}
void update_eeprom_checksum(void)
{
write_eeprom_checksum(eeprom_crc32(EEPROM_OFFSET, EEPROM_DATA_LENGTH)); // recalculate crc and write to eeprom
}
void write_eeprom_checksum(uint32_t crc)
{
EEPROM.update(EEPROM_CRC32_ADDR, (crc & 0xff000000) >> 24);
EEPROM.update(EEPROM_CRC32_ADDR + 1, (crc & 0x00ff0000) >> 16);
EEPROM.update(EEPROM_CRC32_ADDR + 2, (crc & 0x0000ff00) >> 8);
EEPROM.update(EEPROM_CRC32_ADDR + 3, crc & 0x000000ff);
}
uint32_t eeprom_crc32(uint16_t calc_start, uint16_t calc_bytes) // base code from https://www.arduino.cc/en/Tutorial/EEPROMCrc
{
const uint32_t crc_table[16] =
{
0x00000000, 0x1db71064, 0x3b6e20c8, 0x26d930ac,
0x76dc4190, 0x6b6b51f4, 0x4db26158, 0x5005713c,
0xedb88320, 0xf00f9344, 0xd6d6a3e8, 0xcb61b38c,
0x9b64c2b0, 0x86d3d2d4, 0xa00ae278, 0xbdbdf21c
};
uint32_t crc = ~0L;
if (calc_start + calc_bytes > EEPROM.length())
calc_bytes = EEPROM.length() - calc_start;
for (uint16_t index = calc_start ; index < (calc_start + calc_bytes) ; ++index)
{
crc = crc_table[(crc ^ EEPROM[index]) & 0x0f] ^ (crc >> 4);
crc = crc_table[(crc ^ (EEPROM[index] >> 4)) & 0x0f] ^ (crc >> 4);
crc = ~crc;
}
return (crc);
}
#if defined (DEBUG) && defined (SHOW_CPU_LOAD_MSEC)
void show_cpu_and_mem_usage(void)
{
Serial.print(F("CPU: "));
Serial.print(AudioProcessorUsage(), DEC);
Serial.print(F(" CPU MAX: "));
Serial.print(AudioProcessorUsageMax(), DEC);
Serial.print(F(" MEM: "));
Serial.print(AudioMemoryUsage(), DEC);
Serial.print(F(" MEM MAX: "));
Serial.print(AudioMemoryUsageMax(), DEC);
Serial.print(F(" RENDER_TIME_MAX: "));
Serial.print(render_time_max, DEC);
Serial.print(F(" XRUN: "));
Serial.print(xrun, DEC);
Serial.print(F(" OVERLOAD: "));
Serial.print(overload, DEC);
Serial.print(F(" PEAK: "));
Serial.print(peak, DEC);
Serial.println();
AudioProcessorUsageMaxReset();
AudioMemoryUsageMaxReset();
render_time_max = 0;
}
#endif
#ifdef TEST_NOTE
void note_on(void)
{
randomSeed(analogRead(A0));
queue_midi_event(0x90, TEST_NOTE, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 1
queue_midi_event(0x90, TEST_NOTE + 5, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 2
queue_midi_event(0x90, TEST_NOTE + 8, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 3
queue_midi_event(0x90, TEST_NOTE + 12, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 4
queue_midi_event(0x90, TEST_NOTE + 17, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 5
queue_midi_event(0x90, TEST_NOTE + 20, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 6
queue_midi_event(0x90, TEST_NOTE + 24, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 7
queue_midi_event(0x90, TEST_NOTE + 29, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 8
queue_midi_event(0x90, TEST_NOTE + 32, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 9
queue_midi_event(0x90, TEST_NOTE + 37, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 10
queue_midi_event(0x90, TEST_NOTE + 40, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 11
queue_midi_event(0x90, TEST_NOTE + 46, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 12
queue_midi_event(0x90, TEST_NOTE + 49, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 13
queue_midi_event(0x90, TEST_NOTE + 52, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 14
queue_midi_event(0x90, TEST_NOTE + 57, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 15
queue_midi_event(0x90, TEST_NOTE + 60, random(TEST_VEL_MIN, TEST_VEL_MAX)); // 16
}
void note_off(void)
{
queue_midi_event(0x80, TEST_NOTE, 0); // 1
queue_midi_event(0x80, TEST_NOTE + 5, 0); // 2
queue_midi_event(0x80, TEST_NOTE + 8, 0); // 3
queue_midi_event(0x80, TEST_NOTE + 12, 0); // 4
queue_midi_event(0x80, TEST_NOTE + 17, 0); // 5
queue_midi_event(0x80, TEST_NOTE + 20, 0); // 6
queue_midi_event(0x80, TEST_NOTE + 24, 0); // 7
queue_midi_event(0x80, TEST_NOTE + 29, 0); // 8
queue_midi_event(0x80, TEST_NOTE + 32, 0); // 9
queue_midi_event(0x80, TEST_NOTE + 37, 0); // 10
queue_midi_event(0x80, TEST_NOTE + 40, 0); // 11
queue_midi_event(0x80, TEST_NOTE + 46, 0); // 12
queue_midi_event(0x80, TEST_NOTE + 49, 0); // 13
queue_midi_event(0x80, TEST_NOTE + 52, 0); // 14
queue_midi_event(0x80, TEST_NOTE + 57, 0); // 15
queue_midi_event(0x80, TEST_NOTE + 60, 0); // 16
bool success = load_sysex(DEFAULT_SYSEXBANK, (++_voice_counter) - 1);
if (success == false)
#ifdef DEBUG
Serial.println(F("E: Cannot load SYSEX data"));
#endif
else
show_patch();
}
#endif

13
config.h
Unescape View File

@ -29,10 +29,14 @@
// 128 to 64 in <ARDUINO-IDE-DIR>/cores/teensy3/AudioStream.h
// Initial values
#define MIDI_DEVICE Serial1
#define USE_ONBOARD_USB_HOST 1
#define TEENSY_AUDIO_BOARD 1
#define VOLUME 0.6
#define DEFAULT_MIDI_CHANNEL MIDI_CHANNEL_OMNI
#define DEFAULT_SYSEXBANK 0
#define DEFAULT_SYSEXSOUND 0
//#define DEXED_ENGINE DEXED_ENGINE_MODERN
#define AUDIO_MEM 2
#define SAMPLE_RATE 44100
@ -43,6 +47,10 @@
#define MAX_NOTES 16 // Yes
#endif
// Master key handling (comment for disabling)
#define MASTER_KEY_MIDI MIDI_C7
#define MASTER_NUM1 MIDI_C2
// Debug output
#define SERIAL_SPEED 38400
#define DEBUG 1
@ -50,6 +58,11 @@
#define SHOW_XRUN 1
#define SHOW_CPU_LOAD_MSEC 5000
// Enable TEST_NOTE for adding code to drop some midi notes for testing without keyboard
//#define TEST_NOTE MIDI_E2
#define TEST_VEL_MIN 60
#define TEST_VEL_MAX 110
// Use these with the Teensy Audio Shield
//#define SDCARD_CS_PIN 10
//#define SDCARD_MOSI_PIN 7

11
mdaEPiano.cpp
Unescape View File

@ -4,6 +4,8 @@
#include <stdio.h>
#include <math.h>
#include "config.h"
// AudioEffect *createEffectInstance(audioMasterCallback audioMaster)
//{
// return new mdaEPiano(audioMaster);
@ -11,7 +13,7 @@
mdaEPiano::mdaEPiano() // mdaEPiano::mdaEPiano(audioMasterCallback audioMaster) : AudioEffectX(audioMaster, NPROGS, NPARAMS)
{
Fs = 44100.0f; iFs = 1.0f/Fs; //just in case...
Fs = SAMPLE_RATE; iFs = 1.0f/Fs; //just in case...
programs = new mdaEPianoProgram[NPROGS];
if(programs)
@ -154,7 +156,7 @@ void mdaEPiano::update() //parameter change
void mdaEPiano::resume()
{
//Fs = getSampleRate();
Fs=44100;
Fs=SAMPLE_RATE;
iFs = 1.0f / Fs;
dlfo = 6.283f * iFs * (float)exp(6.22f * programs[curProgram].param[5] - 2.61f); //lfo rate
@ -198,8 +200,8 @@ void mdaEPiano::fillpatch(int32_t p, char *name, float p0, float p1, float p2, f
programs[p].param[10]= p10; programs[p].param[11] = p11;
}
/*
float mdaEPiano::getParameter(int32_t index) { return programs[curProgram].param[index]; }
/*
void mdaEPiano::setProgramName(char *name) { strcpy(programs[curProgram].name, name); }
void mdaEPiano::getProgramName(char *name) { strcpy(name, programs[curProgram].name); }
void mdaEPiano::setBlockSize(int32_t blockSize) { AudioEffectX::setBlockSize(blockSize); }
@ -544,10 +546,11 @@ void mdaEPiano::noteOn(int32_t note, int32_t velocity)
int32_t mdaEPiano::processEvents()
{
/*
float * param = programs[curProgram].param;
int32_t npos=0;
/*
for (int32_t i=0; i<ev->numEvents; i++)
{
if((ev->events[i])->type != kVstMidiType) continue;

28
mdaEPiano.h
Unescape View File

@ -64,24 +64,24 @@ public:
virtual int32_t processEvents(); // virtual int32_t processEvents(VstEvents* events);
virtual void setProgram(int32_t program);
virtual void setProgramName(char *name);
virtual void getProgramName(char *name);
//virtual void setProgramName(char *name);
//virtual void getProgramName(char *name);
virtual void setParameter(int32_t index, float value);
virtual float getParameter(int32_t index);
virtual void getParameterLabel(int32_t index, char *label);
virtual void getParameterDisplay(int32_t index, char *text);
virtual void getParameterName(int32_t index, char *text);
virtual void setBlockSize(int32_t blockSize);
//virtual void getParameterLabel(int32_t index, char *label);
//virtual void getParameterDisplay(int32_t index, char *text);
//virtual void getParameterName(int32_t index, char *text);
//virtual void setBlockSize(int32_t blockSize);
virtual void resume();
virtual bool getOutputProperties (int32_t index); // virtual bool getOutputProperties (int32_t index, VstPinProperties* properties);
virtual bool getProgramNameIndexed (int32_t category, int32_t index, char* text);
virtual bool copyProgram (int32_t destination);
virtual bool getEffectName (char* name);
virtual bool getVendorString (char* text);
virtual bool getProductString (char* text);
virtual int32_t getVendorVersion () {return 1;}
virtual int32_t canDo (char* text);
//virtual bool getOutputProperties (int32_t index); // virtual bool getOutputProperties (int32_t index, VstPinProperties* properties);
//virtual bool getProgramNameIndexed (int32_t category, int32_t index, char* text);
//virtual bool copyProgram (int32_t destination);
//virtual bool getEffectName (char* name);
//virtual bool getVendorString (char* text);
//virtual bool getProductString (char* text);
//virtual int32_t getVendorVersion () {return 1;}
//virtual int32_t canDo (char* text);
virtual int32_t getNumMidiInputChannels () { return 1; }

Write Preview
Loading…
Cancel
Save