You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
BALibrary_HW/examples/Delay/SoundOnSoundDemo/SoundOnSoundDemo.ino

191 lines
5.9 KiB

/*************************************************************************
* This demo uses the BAGuitar library to provide enhanced control of
* the TGA Pro board.
*
* The latest copy of the BA Guitar library can be obtained from
* https://github.com/Blackaddr/BAGuitar
*
* This demo will provide an audio passthrough, as well as exercise the
* MIDI interface.
*
* It can optionally exercise the SPI MEM0 if installed on the TGA Pro board.
*
*/
#include <Wire.h>
#include <Audio.h>
#include <MIDI.h>
#include <SPI.h>
#include "BAGuitar.h"
#include <midi_UsbTransport.h>
static const unsigned sUsbTransportBufferSize = 16;
typedef midi::UsbTransport<sUsbTransportBufferSize> UsbTransport;
UsbTransport sUsbTransport;
MIDI_CREATE_INSTANCE(UsbTransport, sUsbTransport, uMIDI);
MIDI_CREATE_DEFAULT_INSTANCE();
using namespace midi;
using namespace BAEffects;
#define MIDI_DEBUG
using namespace BALibrary;
AudioInputI2S i2sIn;
AudioOutputI2S i2sOut;
BAAudioControlWM8731 codec;
// External SRAM is required for this effect due to the very long
// delays required.
ExternalSramManager externalSram;
ExtMemSlot delaySlot; // Declare an external memory slot.
AudioEffectSOS sos(&delaySlot);
// Add some effects for our soloing channel
AudioEffectDelay delayModule; // we'll add a little slapback echo
AudioMixer4 gainModule; // This will be used simply to reduce the gain before the reverb
AudioEffectReverb reverb; // Add a bit of 'verb to our tone
AudioFilterBiquad cabFilter; // We'll want something to cut out the highs and smooth the tone, just like a guitar cab.
AudioMixer4 mixer;
// Connect the input
AudioConnection inputToSos(i2sIn, 0, sos, 0);
AudioConnection inputToSolo(i2sIn, 0, delayModule, 0);
// Patch cables for the SOLO channel
AudioConnection inputToGain(delayModule, 0, gainModule, 0);
AudioConnection inputToReverb(gainModule, 0, reverb, 0);
// Output Mixer
AudioConnection mixer0input(i2sIn, 0, mixer, 0); // SOLO Dry Channel
AudioConnection mixer1input(reverb, 0, mixer, 1); // SOLO Wet Channel
AudioConnection mixer2input(sos, 0, mixer, 2); // SOS Channel
AudioConnection inputToCab(mixer, 0, cabFilter, 0);
// CODEC Outputs
AudioConnection outputLeft(cabFilter, 0, i2sOut, 0);
AudioConnection outputRight(cabFilter, 0, i2sOut, 1);
int loopCount = 0;
void OnControlChange(byte channel, byte control, byte value) {
sos.processMidi(channel-1, control, value);
#ifdef MIDI_DEBUG
Serial.print("Control Change, ch=");
Serial.print(channel, DEC);
Serial.print(", control=");
Serial.print(control, DEC);
Serial.print(", value=");
Serial.print(value, DEC);
Serial.println();
#endif
}
void setup() {
delay(100);
Serial.begin(57600); // Start the serial port
// Disable the codec first
codec.disable();
delay(100);
AudioMemory(128);
delay(5);
// Enable the codec
Serial.println("Enabling codec...\n");
codec.enable();
delay(100);
// We have to request memory be allocated to our slot.
externalSram.requestMemory(&delaySlot, SPI_MEM0_SIZE_BYTES, MemSelect::MEM0, true);
//externalSram.requestMemory(&delaySlot, 50.0f, MemSelect::MEM0, true);
// Setup MIDI
MIDI.begin(MIDI_CHANNEL_OMNI);
MIDI.setHandleControlChange(OnControlChange);
uMIDI.begin(MIDI_CHANNEL_OMNI);
uMIDI.setHandleControlChange(OnControlChange);
// Configure the LED to indicate the gate status
sos.setGateLedGpio(USR_LED_ID);
// Configure which MIDI CC's will control the effect parameters
sos.mapMidiControl(AudioEffectSOS::BYPASS,16);
sos.mapMidiControl(AudioEffectSOS::CLEAR_FEEDBACK_TRIGGER,22);
sos.mapMidiControl(AudioEffectSOS::GATE_TRIGGER,23);
sos.mapMidiControl(AudioEffectSOS::GATE_OPEN_TIME,20);
sos.mapMidiControl(AudioEffectSOS::GATE_CLOSE_TIME,21);
sos.mapMidiControl(AudioEffectSOS::FEEDBACK,24);
sos.mapMidiControl(AudioEffectSOS::VOLUME,17);
// Besure to enable the delay. When disabled, audio is is completely blocked
// to minimize resources to nearly zero.
sos.enable();
// Set some default values.
// These can be changed by sending MIDI CC messages over the USB using
// the BAMidiTester application.
sos.bypass(false);
sos.gateOpenTime(3000.0f);
sos.gateCloseTime(1000.0f);
sos.feedback(0.9f);
// Setup effects on the SOLO channel
gainModule.gain(0, 0.25); // the reverb unit clips easily if the input is too high
delayModule.delay(0, 50.0f); // 50 ms slapback delay
// Setup 2-stages of LPF, cutoff 4500 Hz, Q-factor 0.7071 (a 'normal' Q-factor)
cabFilter.setLowpass(0, 4500, .7071);
cabFilter.setLowpass(1, 4500, .7071);
// Setup the Mixer
mixer.gain(0, 0.5f); // SOLO Dry gain
mixer.gain(1, 0.5f); // SOLO Wet gain
mixer.gain(1, 1.0f); // SOS gain
}
void loop() {
// usbMIDI.read() needs to be called rapidly from loop(). When
// each MIDI messages arrives, it return true. The message must
// be fully processed before usbMIDI.read() is called again.
if (loopCount % 524288 == 0) {
Serial.print("Processor Usage, Total: "); Serial.print(AudioProcessorUsage());
Serial.print("% ");
Serial.print(" sos: "); Serial.print(sos.processorUsage());
Serial.println("%");
}
loopCount++;
MIDI.read();
uMIDI.read();
// // check for new MIDI from USB
// if (usbMIDI.read()) {
// // this code entered only if new MIDI received
// byte type, channel, data1, data2, cable;
// type = usbMIDI.getType(); // which MIDI message, 128-255
// channel = usbMIDI.getChannel(); // which MIDI channel, 1-16
// data1 = usbMIDI.getData1(); // first data byte of message, 0-127
// data2 = usbMIDI.getData2(); // second data byte of message, 0-127
// Serial.println(String("Received a MIDI message on channel ") + channel);
//
// if (type == MidiType::ControlChange) {
// // if type is 3, it's a CC MIDI Message
// // Note: the Arduino MIDI library encodes channels as 1-16 instead
// // of 0 to 15 as it should, so we must subtract one.
// OnControlChange(channel-1, data1, data2);
// }
// }
}