You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
94 lines
2.6 KiB
94 lines
2.6 KiB
|
|
/*************************************************************************
|
|
* This demo does high speed testing of the Serial1 hardware port. On
|
|
* The TGA Pro, this is used for MIDI. MIDI is essentially a Serial protocol
|
|
* running 31250 baud with port configuration 8N1.
|
|
*
|
|
* Despite there being MIDI physical circuitry on the TGA Pro, we can still
|
|
* run a serial protocol at different rates to ensure a robust design.
|
|
*
|
|
* CONNECT A MIDI CABLE FROM MIDI_INPUT TO MIDI_OUTPUT AS A LOOPBACK.
|
|
*/
|
|
constexpr unsigned LOW_RATE = 2400;
|
|
constexpr unsigned MIDI_RATE = 31250;
|
|
constexpr unsigned HIGH_RATE = 230400;
|
|
constexpr unsigned TEST_TIME = 5; // 5 second test each
|
|
|
|
unsigned baudRate = LOW_RATE; // start with low speed
|
|
uint8_t writeData = 0;
|
|
unsigned loopCounter = 0;
|
|
unsigned errorCount = 0;
|
|
bool testFailed = false;
|
|
bool testDone = false;
|
|
unsigned testPhase = 0; // 0 for low speed, 1 for MIDI speed, 2 for high speed.
|
|
|
|
void setup() {
|
|
// put your setup code here, to run once:
|
|
Serial.begin(57600);
|
|
Serial1.begin(baudRate, SERIAL_8N1);
|
|
delay(100);
|
|
while(!Serial) {}
|
|
Serial.println(String("\nRunning speed test at ") + baudRate);
|
|
|
|
// write the first data
|
|
Serial1.write(writeData);
|
|
}
|
|
|
|
|
|
void loop() {
|
|
|
|
if ((!testFailed) && (!testDone)) {
|
|
|
|
if (loopCounter >= (baudRate/4)) { // the divisor determines how long the test runs for
|
|
// next test
|
|
switch (testPhase) {
|
|
case 0 :
|
|
baudRate = MIDI_RATE;
|
|
break;
|
|
case 1 :
|
|
baudRate = HIGH_RATE;
|
|
break;
|
|
case 2 :
|
|
testDone = true;
|
|
}
|
|
|
|
if (errorCount == 0) { Serial.println("TEST PASSED!"); }
|
|
else {
|
|
Serial.println("TEST FAILED!");
|
|
}
|
|
errorCount = 0;
|
|
testPhase++;
|
|
loopCounter = 0;
|
|
|
|
if (!testDone) {
|
|
Serial.println(String("\nRunning speed test at ") + baudRate);
|
|
Serial1.begin(baudRate, SERIAL_8N1);
|
|
while (!Serial1) {} // wait for serial to be ready
|
|
} else {
|
|
Serial.println("\nTEST DONE!");
|
|
}
|
|
}
|
|
|
|
// Wait for read data
|
|
if (Serial1.available()) {
|
|
uint8_t readData= Serial1.read();
|
|
if (readData != writeData) {
|
|
Serial.println(String("ERROR: readData = ") + readData + String(" writeData = ") + writeData);
|
|
errorCount++;
|
|
}
|
|
|
|
if ((loopCounter % (baudRate/64)) == 0) { // the divisor determines how often the period is printed
|
|
Serial.print("."); Serial.flush();
|
|
}
|
|
|
|
if (errorCount > 16) {
|
|
Serial.println("Halting test");
|
|
testFailed = true;
|
|
}
|
|
|
|
loopCounter++;
|
|
writeData++;
|
|
Serial1.write(writeData);
|
|
}
|
|
}
|
|
}
|
|
|