w.i.p

src/BAHardware.h

@@ -40,7 +40,7 @@ enum class TgaBoard : unsigned {
     REV_A = 0, ///< indicates using REV A of the TGA Pro
     REV_B,     ///< indicates using REV B of the TGA Pro
     MKII_REV1, ///< indicates using MKII, Rev 1 of the TGA Pro
-    AVALON
+    MULTIVERSE ///< indicates using the Aviate Audio Multiverse
 };
 
 /// enum to specify the TGA Board revision
@@ -54,7 +54,8 @@ enum class ExpansionBoard : unsigned {
     NO_EXPANSION = 0, ///< default, indicates no expansion board is present
     REV_1,            ///< indicates using REV 1 of the Expansion Board
     REV_2,            ///< indicates using REV 2 of the Expansion Board
-    REV_3             ///< indicates using REV 3 of the Expansion Board (MKII Series)
+    REV_3,            ///< indicates using REV 3 of the Expansion Board (MKII Series)
+    MULTIVERSE        ///< indicates using the Aviate Audio Multiverse for controls
 };
 
 /// enum to specify SPI memory dize
@@ -204,9 +205,12 @@ extern BAHardware BAHardwareConfig; ///< external definition of global configura
 #define TGA_PRO_REVA(x)        BALibrary::BAHardwareConfig.set(TgaBoard::REV_A)     ///< Macro for specifying REV A of the TGA Pro
 #define TGA_PRO_REVB(x)        BALibrary::BAHardwareConfig.set(TgaBoard::REV_B)     ///< Macro for specifying REV B of the TGA Pro
 #define TGA_PRO_MKII_REV1(x)   BALibrary::BAHardwareConfig.set(TgaBoard::MKII_REV1) ///< Macro for specifying REV B of the TGA Pro
+#define MULTIVERSE(x)          BALibrary::BAHardwareConfig.set(TgaBoard::MULTIVERSE) ///< Macro for specifying REV B of the TGA Pro
 
 #define TGA_PRO_EXPAND_REV2(x) BALibrary::BAHardwareConfig.setExpansionBoard(ExpansionBoard::REV_2) ///< Macro for specifying REV 2 of the Expansion Board
 #define TGA_PRO_EXPAND_REV3(x) BALibrary::BAHardwareConfig.setExpansionBoard(ExpansionBoard::REV_3) ///< Macro for specifying REV 2 of the Expansion Board
+#define MULTIVERSE_EXPAND(x)   BALibrary::BAHardwareConfig.setExpansionBoard(ExpansionBoard::MULTIVERSE) ///< Macro for specifying Multiverse
+
 
 #define SPI_MEM0_1M(x)         BALibrary::BAHardwareConfig.set(MEM0, SPI_MEMORY_1M)   ///< Macro for specifying MEM0 is 1Mbit
 #define SPI_MEM0_4M(x)         BALibrary::BAHardwareConfig.set(MEM0, SPI_MEMORY_4M)   ///< Macro for specifying MEM0 is 4Mbit
@@ -228,9 +232,32 @@ extern uint8_t BA_EXPAND_POT3_PIN; // 16_A2_RX4_SCL1
 
 extern uint8_t BA_EXPAND_SW1_PIN;  // 2_OUT2
 extern uint8_t BA_EXPAND_SW2_PIN;  // 3_LRCLK2
+
+
 extern uint8_t BA_EXPAND_LED1_PIN;  // 4_BLCK2
 extern uint8_t BA_EXPAND_LED2_PIN;  // 5_IN2
 
+// Only used on Aviate Audio Multiverse
+// START Multiverse definitions
+extern uint8_t BA_EXPAND_POT4_PIN;
+extern uint8_t BA_EXPAND_POT5_PIN;
+extern uint8_t BA_EXPAND_POT6_PIN;
+
+extern uint8_t BA_EXPAND_SW3_PIN;
+extern uint8_t BA_EXPAND_SW4_PIN;
+extern uint8_t BA_EXPAND_SW5_PIN;
+extern uint8_t BA_EXPAND_SW6_PIN;
+
+extern uint8_t BA_EXPAND_ENC1_A_PIN;
+extern uint8_t BA_EXPAND_ENC1_B_PIN;
+extern uint8_t BA_EXPAND_ENC2_A_PIN;
+extern uint8_t BA_EXPAND_ENC2_B_PIN;
+extern uint8_t BA_EXPAND_ENC3_A_PIN;
+extern uint8_t BA_EXPAND_ENC3_B_PIN;
+extern uint8_t BA_EXPAND_ENC4_A_PIN;
+extern uint8_t BA_EXPAND_ENC4_B_PIN;
+// END Multiverse defintiions
+
 extern uint8_t GPIO0;
 extern uint8_t GPIO1;
 extern uint8_t GPIO2;
@@ -253,12 +280,12 @@ extern uint8_t SPI1_CS_PIN;
 extern uint8_t SPI1_MISO_PIN;
 extern uint8_t SPI1_MOSI_PIN;
 
-#if defined(ARDUINO_TEENSY41) || defined(__MK66FX1M0__) || defined(__MK64FX512__)
+#if defined(ARDUINO_TEENSY41) || defined(ARDUINO_TEENSY_MICROMOD) || defined(__MK66FX1M0__) || defined(__MK64FX512__)
 #define SPI1_AVAILABLE
 #endif
 
 /**************************************************************************//**
- * Teensy 4.0 Hardware Settings
+ * Teensy 4.X Hardware Settings
  *****************************************************************************/
 #if defined(__IMXRT1062__) // T4.0
 

src/LibMemoryManagement.h

@@ -80,6 +80,55 @@ public:
 	/// @returns the read position value
 	size_t getReadPosition() const { return m_currentRdPosition-m_start; }
 
+	/* Byte-based transfers */
+
+	/// Write a block of zeros (8-bit) to the memory at the specified offset
+	/// @param offsetBytes offset in 8-bit bytes from start of slot
+	/// @param numBytes number of 8-bit bytes to transfer
+	/// @returns true on success, else false on error
+	bool zero(size_t offsetBytes, size_t numBytes);
+
+	/// Write a block of 8-bit data to the memory at the specified offset
+	/// @param offsetBytes offset in 8-bit bytes from start of slot
+	/// @param src pointer to start of block of 16-bit data
+	/// @param numBytes number of 8-bit bytes to transfer
+	/// @returns true on success, else false on error
+	bool write(size_t offsetBytes, uint8_t *src, size_t numBytes);
+
+	/// Read a block of 8-bit data from the memory at the specified location
+	/// @param offsetBytes offset in 8-bit bytes from start of slot
+	/// @param dest pointer to destination for the read data
+	/// @param numBytes number of 8-bit bytes to transfer
+	/// @returns true on success, else false on error
+	bool read(size_t offsetBytes, uint8_t *dest, size_t numBytes);
+
+	/// Write a block of 16-bit data zeros in circular operation
+	/// @param numBytes number of 16-bit words to transfer
+	/// @returns true on success, else false on error
+	bool zeroAdvance(size_t numBytes);
+
+	/// Write a single 16-bit data to the next location in circular operation
+	/// @param data the 16-bit word to transfer
+	/// @returns true on success, else false on error
+	bool writeAdvance(uint8_t data); // write just one data
+
+	/// Write a block of 16-bit data from the specified location in circular operation
+	/// @param src pointer to the start of the block of data to write to memory
+	/// @param numBytes number of 16-bit words to transfer
+	/// @returns true on success, else false on error
+	bool writeAdvance(uint8_t *src, size_t numBytes);
+
+	/// Read the next byte in memory during circular operation
+	/// @returns the next 8-bit data word in memory
+	uint8_t readAdvance();
+
+	/// Read the next block of numWords during circular operation
+	/// @details, dest is ignored when using DMA
+	/// @param dest pointer to the destination of the read.
+	/// @param numBytes number of 16-bit words to transfer
+	/// @returns true on success, else false on error
+	bool readAdvance(uint8_t *dest, size_t numBytes);
+
 	/// Write a block of 16-bit data to the memory at the specified offset
 	/// @param offsetWords offset in 16-bit words from start of slot
 	/// @param src pointer to start of block of 16-bit data
@@ -100,11 +149,12 @@ public:
 	/// @returns true on success, else false on error
 	bool read16(size_t offsetWords, int16_t *dest, size_t numWords);
 
+	/* 16-bit data transfers */
+
 	/// Read the next in memory during circular operation
 	/// @returns the next 16-bit data word in memory
 	uint16_t readAdvance16();
 
-
 	/// Read the next block of numWords during circular operation
 	/// @details, dest is ignored when using DMA
 	/// @param dest pointer to the destination of the read.

src/common/BAHardware.cpp

@@ -40,6 +40,7 @@ uint8_t BA_EXPAND_POT3_PIN = A2; // 16_A2_RX4_SCL1
 
 uint8_t BA_EXPAND_SW1_PIN  = 2;  // 2_OUT2
 uint8_t BA_EXPAND_SW2_PIN  = 3;  // 3_LRCLK2
+
 uint8_t BA_EXPAND_LED1_PIN = 4;  // 4_BLCK2
 uint8_t BA_EXPAND_LED2_PIN = 5;  // 5_IN2
 
@@ -66,6 +67,27 @@ uint8_t SPI1_CS_PIN   = 38;
 uint8_t SPI1_MISO_PIN = 39;
 uint8_t SPI1_MOSI_PIN = 26;
 
+// The following pins are only used on Multiverse
+// They have dummy default values
+uint8_t BA_EXPAND_POT4_PIN = A0;
+uint8_t BA_EXPAND_POT5_PIN = A0;
+uint8_t BA_EXPAND_POT6_PIN = A0;
+
+uint8_t BA_EXPAND_SW3_PIN  = 0;
+uint8_t BA_EXPAND_SW4_PIN  = 0;
+uint8_t BA_EXPAND_SW5_PIN  = 0;
+uint8_t BA_EXPAND_SW6_PIN  = 0;
+
+uint8_t BA_EXPAND_ENC1_A_PIN  = 0;
+uint8_t BA_EXPAND_ENC1_B_PIN  = 0;
+uint8_t BA_EXPAND_ENC2_A_PIN  = 0;
+uint8_t BA_EXPAND_ENC2_B_PIN  = 0;
+uint8_t BA_EXPAND_ENC3_A_PIN  = 0;
+uint8_t BA_EXPAND_ENC3_B_PIN  = 0;
+uint8_t BA_EXPAND_ENC4_A_PIN  = 0;
+uint8_t BA_EXPAND_ENC4_B_PIN  = 0;
+
+
 BAHardware::BAHardware()
 {
 #if defined(ARDUINO_TEENSY41) || defined(ARDUINO_TEENSY40) || defined(ARDUINO_TEENSY_MICROMOD) // T4.X
@@ -88,6 +110,7 @@ void BAHardware::set(TgaBoard tgaBoard)
     if (tgaBoard == TgaBoard::MKII_REV1) {
         // No change from defaults
     }
+    return;
 #endif
 
 #if defined(__MK66FX1M0__) || defined(__MK64FX512__) || defined(__MK20DX256__) // T3.6 or T3.5 or T3.2
@@ -126,6 +149,7 @@ void BAHardware::set(TgaBoard tgaBoard)
         SPI1_MISO_PIN = 5;
         SPI1_MOSI_PIN = 21;
     }
+    return;
 #endif
 
     ////////////////////////////////////////////////////////////////////////////
@@ -162,6 +186,7 @@ void BAHardware::set(TgaBoard tgaBoard)
         SPI0_MISO_PIN = 12;
         SPI0_MOSI_PIN = 11;
     }
+    return;
 #endif
 
 #if defined(__MK66FX1M0__) || defined(__MK64FX512__) || defined(__MK20DX256__) // T3.6 or T3.5 or T3.2
@@ -199,6 +224,7 @@ void BAHardware::set(TgaBoard tgaBoard)
         SPI1_MISO_PIN = 5;
         SPI1_MOSI_PIN = 21;
     }
+    return;
 #endif
 
     ////////////////////////////////////////////////////////////////////////////
@@ -226,6 +252,7 @@ void BAHardware::set(TgaBoard tgaBoard)
         SPI0_MISO_PIN = 12;
         SPI0_MOSI_PIN = 11;
     }
+    return;
 #endif
 
 #if defined(__MK66FX1M0__) || defined(__MK64FX512__) || defined(__MK20DX256__) // T3.6 or T3.5 or T3.2
@@ -255,32 +282,57 @@ void BAHardware::set(TgaBoard tgaBoard)
         SPI1_MISO_PIN = 5;
         SPI1_MOSI_PIN = 21;
     }
+    return;
 #endif
 
     ////////////////////////////////////////////////////////////////////////////
-    // Avalon                                                                 //
+    // MULTIVERSE                                                             //
     ////////////////////////////////////////////////////////////////////////////
-#if defined(ARDUINO_TEENSY41) // T4.X
-    if (tgaBoard == TgaBoard::AVALON) {
-        BA_EXPAND_NUM_POT  = 2;
+#if defined(ARDUINO_TEENSY_MICROMOD)
+    if (tgaBoard == TgaBoard::MULTIVERSE) {
+        BA_EXPAND_NUM_POT  = 4;
         BA_EXPAND_NUM_SW   = 6;
         BA_EXPAND_NUM_LED  = 2;
         BA_EXPAND_NUM_ENC  = 4;
 
-        BA_EXPAND_POT1_PIN = A0;
-        BA_EXPAND_POT2_PIN = A1;
-        BA_EXPAND_POT3_PIN = A13;
+        BA_EXPAND_POT1_PIN = A8;
+        BA_EXPAND_POT2_PIN = A0;
+        BA_EXPAND_POT3_PIN = A2;
+        BA_EXPAND_POT4_PIN = A3;
+
+        BA_EXPAND_SW1_PIN  = 6;
+        BA_EXPAND_SW2_PIN  = 34;
+        BA_EXPAND_SW3_PIN  = 45;
+        BA_EXPAND_SW4_PIN  = 32;
+        BA_EXPAND_SW5_PIN  = 41;
+        BA_EXPAND_SW6_PIN  = 40;
 
-        BA_EXPAND_SW1_PIN  = 17;
-        BA_EXPAND_SW2_PIN  = 16;
-        BA_EXPAND_LED1_PIN = 22;
-        BA_EXPAND_LED2_PIN = 32;
+        BA_EXPAND_ENC1_A_PIN  = 33;
+        BA_EXPAND_ENC1_B_PIN  = 2;
+
+        BA_EXPAND_ENC2_A_PIN  = 31;
+        BA_EXPAND_ENC2_B_PIN  = 36;
+
+        BA_EXPAND_ENC3_A_PIN  = 5;
+        BA_EXPAND_ENC3_B_PIN  = 4;
+
+        BA_EXPAND_ENC4_A_PIN  = 3;
+        BA_EXPAND_ENC4_B_PIN  = 30;
+
+        BA_EXPAND_LED1_PIN = 9;
+        BA_EXPAND_LED2_PIN = 42;
 
         SPI0_SCK_PIN  = 13;
         SPI0_CS_PIN   = 10;
         SPI0_MISO_PIN = 12;
         SPI0_MOSI_PIN = 11;
+
+        SPI1_SCK_PIN  = 27;
+        SPI1_CS_PIN   = 43;
+        SPI1_MISO_PIN = 1;
+        SPI1_MOSI_PIN = 26;
     }
+    return;
 #endif
 }
 

src/common/ExtMemSlot.cpp

@@ -31,7 +31,7 @@ namespace BALibrary {
 bool ExtMemSlot::clear()
 {
 	if (!m_valid) { return false; }
-	m_spi->zero16(m_start, m_size);
+	m_spi->zero(m_start, m_size);
 	return true;
 }
 
@@ -43,13 +43,25 @@ bool ExtMemSlot::setWritePosition(size_t offsetBytes)
 	} else { return false; }
 }
 
-bool ExtMemSlot::write16(size_t offsetWords, int16_t *src, size_t numWords)
+bool ExtMemSlot::setReadPosition(size_t offsetBytes)
+{
+	if (m_start + offsetBytes <= m_end) {
+		m_currentRdPosition = m_start + offsetBytes;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+/////////////////////////////////////////////////////////////////////////
+// BYTE BASED TRANSFERS
+/////////////////////////////////////////////////////////////////////////
+bool ExtMemSlot::zero(size_t offsetBytes, size_t numBytes)
 {
 	if (!m_valid) { return false; }
-	size_t writeStart = m_start + sizeof(int16_t)*offsetWords; // 2x because int16 is two bytes per data
-	size_t numBytes = sizeof(int16_t)*numWords;
+	size_t writeStart = m_start + offsetBytes;
 	if ((writeStart + numBytes-1) <= m_end) {
-		m_spi->write16(writeStart, reinterpret_cast<uint16_t*>(src), numWords); // cast audio data to uint
+		m_spi->zero(writeStart, numBytes); // cast audio data to uint
 		return true;
 	} else {
 		// this would go past the end of the memory slot, do not perform the write
@@ -57,16 +69,138 @@ bool ExtMemSlot::write16(size_t offsetWords, int16_t *src, size_t numWords)
 	}
 }
 
-bool ExtMemSlot::setReadPosition(size_t offsetBytes)
+bool ExtMemSlot::write(size_t offsetBytes, uint8_t *src, size_t numBytes)
 {
-	if (m_start + offsetBytes <= m_end) {
-		m_currentRdPosition = m_start + offsetBytes;
+	if (!m_valid) { return false; }
+	size_t writeStart = m_start + offsetBytes;
+	if ((writeStart + numBytes-1) <= m_end) {
+		m_spi->write(writeStart, src, numBytes); // cast audio data to uint
+		return true;
+	} else {
+		// this would go past the end of the memory slot, do not perform the write
+		return false;
+	}
+}
+
+bool ExtMemSlot::read(size_t offsetBytes, uint8_t *dest, size_t numBytes)
+{
+	if (!dest) return false; // invalid destination
+	size_t readOffset = m_start + offsetBytes;
+
+	if ((readOffset + numBytes-1) <= m_end) {
+		m_spi->read(readOffset, dest, numBytes);
 		return true;
 	} else {
+		// this would go past the end of the memory slot, do not perform the read
 		return false;
 	}
 }
 
+bool ExtMemSlot::zeroAdvance(size_t numBytes)
+{
+	if (!m_valid) { return false; }
+
+	if (m_currentWrPosition + numBytes-1 <= m_end) {
+		// entire block fits in memory slot without wrapping
+		m_spi->zero(m_currentWrPosition, numBytes); // cast audio data to uint.
+		m_currentWrPosition += numBytes;
+
+	} else {
+		// this write will wrap the memory slot
+		size_t wrBytes = m_end - m_currentWrPosition + 1;
+		m_spi->zero(m_currentWrPosition, wrBytes);
+		size_t remainingBytes = numBytes - wrBytes; // calculate the remaining bytes
+		m_spi->zero(m_start, remainingBytes); // write remaining bytes are start
+		m_currentWrPosition = m_start + remainingBytes;
+	}
+	return true;
+}
+
+bool ExtMemSlot::writeAdvance(uint8_t data)
+{
+	if (!m_valid) { return false; }
+
+	m_spi->write(m_currentWrPosition, static_cast<uint8_t>(data));
+	if (m_currentWrPosition < m_end-1) {
+		m_currentWrPosition++; // wrote two bytes
+	} else {
+		m_currentWrPosition = m_start;
+	}
+	return true;
+}
+
+bool ExtMemSlot::writeAdvance(uint8_t *src, size_t numBytes)
+{
+	if (!m_valid) { return false; }
+
+	if (m_currentWrPosition + numBytes-1 <= m_end) {
+		// entire block fits in memory slot without wrapping
+		m_spi->write(m_currentWrPosition, reinterpret_cast<uint8_t*>(src), numBytes); // cast audio data to uint.
+		m_currentWrPosition += numBytes;
+
+	} else {
+		// this write will wrap the memory slot
+		size_t wrBytes = m_end - m_currentWrPosition + 1;
+		m_spi->write(m_currentWrPosition, src, wrBytes);
+		size_t remainingData = numBytes - wrBytes;
+		m_spi->write(m_start, src + wrBytes, remainingData); // write remaining bytes are start
+		m_currentWrPosition = m_start + remainingData;
+	}
+	return true;
+}
+
+/// Read the next in memory during circular operation
+/// @returns the next 8-bit data word in memory
+uint8_t ExtMemSlot::readAdvance() {
+	uint8_t val = m_spi->read(m_currentRdPosition);
+	if (m_currentRdPosition < m_end-1) {
+		m_currentRdPosition ++; // position is in bytes and we read two
+	} else {
+		m_currentRdPosition = m_start;
+	}
+	return val;
+}
+
+bool ExtMemSlot::readAdvance(uint8_t *dest, size_t numBytes)
+{
+	if (!m_valid) { return false; }
+
+    if (m_currentRdPosition + numBytes-1 <= m_end) {
+        // entire block fits in memory slot without wrapping
+        m_spi->read(m_currentRdPosition, dest, numBytes); // cast audio data to uint.
+        m_currentRdPosition += numBytes;
+
+    } else {
+        // this read will wrap the memory slot
+        size_t rdBytes = m_end - m_currentRdPosition + 1;
+        m_spi->read(m_currentRdPosition, dest, rdBytes);
+        size_t remainingData = numBytes - rdBytes;
+        m_spi->read(m_start, (dest + rdBytes), remainingData); // write remaining bytes are start
+        m_currentRdPosition = m_start + remainingData;
+    }
+    return true;
+}
+
+/////////////////////////////////////////////////////////////////////////
+// 16-BIT BASED TRANSFERS
+/////////////////////////////////////////////////////////////////////////
+
+bool ExtMemSlot::write16(size_t offsetWords, int16_t *src, size_t numWords)
+{
+	if (!m_valid) { return false; }
+	size_t writeStart = m_start + sizeof(int16_t)*offsetWords; // 2x because int16 is two bytes per data
+	size_t numBytes = sizeof(int16_t)*numWords;
+	if ((writeStart + numBytes-1) <= m_end) {
+		m_spi->write16(writeStart, reinterpret_cast<uint16_t*>(src), numWords); // cast audio data to uint
+		return true;
+	} else {
+		// this would go past the end of the memory slot, do not perform the write
+		return false;
+	}
+}
+
+
+
 bool ExtMemSlot::zero16(size_t offsetWords, size_t numWords)
 {
 	if (!m_valid) { return false; }

src/common/ExternalSramManager.cpp

@@ -68,7 +68,7 @@ bool ExternalSramManager::requestMemory(ExtMemSlot *slot, size_t sizeBytes, BALi
     if (!m_configured) { m_configure(); }
 
 	if (m_memConfig[mem].totalAvailable >= sizeBytes) {
-		Serial.println(String("Configuring a slot for mem ") + mem);
+		if (Serial) Serial.printf("Configuring mem %d, for size %d, available %d\n\r", (unsigned)mem, sizeBytes, m_memConfig[mem].totalAvailable);
 		// there is enough available memory for this request
 		slot->m_start = m_memConfig[mem].nextAvailable;
 		slot->m_end   = slot->m_start + sizeBytes -1;
@@ -78,13 +78,16 @@ bool ExternalSramManager::requestMemory(ExtMemSlot *slot, size_t sizeBytes, BALi
 
 		if (!m_memConfig[mem].m_spi) {
 		    if (useDma) {
+				if (Serial) { Serial.printf("Creating S for id %d\n\r", (int)mem);}
 		        m_memConfig[mem].m_spi = new BALibrary::BASpiMemoryDMA(static_cast<BALibrary::SpiDeviceId>(mem));
 		        slot->m_useDma = true;
 		    } else {
+				if (Serial) { Serial.printf("Creating BASpiMemory for id %d\n\r", (int)mem);}
 		        m_memConfig[mem].m_spi = new BALibrary::BASpiMemory(static_cast<BALibrary::SpiDeviceId>(mem));
 		        slot->m_useDma = false;
 		    }
 			if (!m_memConfig[mem].m_spi) {
+				if (Serial) { Serial.printf("Failed to create SPI for id %d\n\r", (int)mem);}
 			} else {
 				Serial.println("Calling spi begin()");
 				m_memConfig[mem].m_spi->begin();