Revised the description of password change for SoftAP in FAQ

mkdocs/faq.md

@@ -62,22 +62,6 @@ void loop() {
 
 Probably **WiFi.begin** failed with the specified SSID. Activating the [debug printing](advancedusage.md#debug-print) will help you to track down the cause.
 
-## <i class="fa fa-question-circle"></i> How can I detect the captive portal starting?
-
-You can use the [AutoConnect::onDetect](api.md#ondetect) exit routine. For more details and an implementation example of the onDetect exit routine, refer to the chapter "[Captive portal start detection](advancedusage.md#captive-portal-start-detection)".
-
-## <i class="fa fa-question-circle"></i> How change esp8266ap for SSID name in Captive portal?
-
-You can change both by using [AutoConnectConfig::apid](apiconfig.md#apid) and [AutoConnectConfig::psk](apiconfig.md#psk). Refer to section [Change SSID and Password for SoftAP](advancedusage.md#change-ssid-and-password-for-softap) in [Advanced usage](advancedusage.md).
-
-## <i class="fa fa-question-circle"></i> How change HTTP port?
-
-HTTP port number is defined as a macro in [AutoConnectDefs.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDefs.h#L112) header file. You can change it directly with several editors and must re-compile.
-
-```cpp
-#define AUTOCONNECT_HTTPPORT    80
-```
-
 ## <i class="fa fa-question-circle"></i> Hang up after Reset?
 
 If ESP8266 hang up after reset by AutoConnect menu, perhaps manual reset is not yet. Especially if it is not manual reset yet after uploading the sketch, the boot mode will stay 'Uart Download'. There is some discussion about this on the Github's ESP8266 core: https://github.com/esp8266/Arduino/issues/1017 [^1]
@@ -102,6 +86,22 @@ The correct boot mode for starting the sketch is **(3, x)**.
     | rst cause | 1: power on<br>2: external reset<br>4: hardware watchdog reset |
     | boot mode<br>(the first parameter) | 1: ESP8266 is in UART-down mode (and downloads firmware into flash).<br>3: ESP8266 is in Flash-boot mode (and boots up from flash). |
 
+## <i class="fa fa-question-circle"></i> How can I detect the captive portal starting?
+
+You can use the [AutoConnect::onDetect](api.md#ondetect) exit routine. For more details and an implementation example of the onDetect exit routine, refer to the chapter "[Captive portal start detection](advancedusage.md#captive-portal-start-detection)".
+
+## <i class="fa fa-question-circle"></i> How change HTTP port?
+
+HTTP port number is defined as a macro in [AutoConnectDefs.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnectDefs.h#L112) header file. You can change it directly with several editors and must re-compile.
+
+```cpp
+#define AUTOCONNECT_HTTPPORT    80
+```
+
+## <i class="fa fa-question-circle"></i> How change SSID or Password in Captive portal?
+
+You can change both by using [AutoConnectConfig::apid](apiconfig.md#apid) and [AutoConnectConfig::psk](apiconfig.md#psk). Refer to section [Change SSID and Password for SoftAP](advancedusage.md#change-ssid-and-password-for-softap) in [Advanced usage](advancedusage.md).
+
 ## <i class="fa fa-question-circle"></i> How erase the credentials saved in EEPROM?
 
 Make some sketches for erasing the EEPROM area, or some erasing utility is needed. You can prepare the sketch to erase the saved credential with *AutoConnectCredential*. The *AutoConnectCrendential* class provides the access method to the saved credential in EEPROM and library source file is including it. Refer to '[Saved credential access](credit.md#saved-credential-in-eeprom)' on section [Appendix](credit.md) for details.