Registering the "not found" handler is a different way than ESP8266WebServer. The *onNotFound* of ESP8266WebServer does not work with AutoConnect. AutoConnect overrides *ESP8266WebServer::onNotFound* to handle a captive portal. To register "not found" handler, use [*AutoConnect::onNotFound*](api.md#onnotfound).
If the [**autoReconnect**](api.md#autoreconnect) option of the [**AutoConnectConfig**](api.md#autoconnectconfig-api) class is enabled, it automatically attempts to reconnect to the disconnected past access point. When the autoReconnect option is specified, AutoConnect will not start SoftAP immediately if the first WiFi.begin fails. It will scan WiFi signal and the same connection information as the detected BSSID is stored in EEPROM as AutoConnect's credentials, explicitly apply it with WiFi.begin and rerun.
```arduino hl_lines="3"
AutoConnect Portal;
AutoConnectConfig Config;
Config.autoReconnect = true;
Portal.config(Config);
Portal.begin();
```
An autoReconnect option is available to *AutoConnect::begin* without SSID and pass passphrase.
By default, AutoConnect saves the credentials of the established connection in EEPROM. You can disable it with the [**autoSave**](api.md#autosave) parameter specified by [**AutoConnectConfig**](api.md#autoconnectconfig).
The captive portal will only be activated if the first *WiFi::begin* fails. Sketch can detect with the [*AutoConnect::onDetect*](api.md#ondetect) function that the captive portal has started. For example, the sketch can be written like as follows that turns on the LED at the start captive portal.
With [mDNS library](https://github.com/esp8266/Arduino/tree/master/libraries/ESP8266mDNS), you can access to ESP8266 by name instead of IP address after connection. The sketch can start the MDNS responder after [*AutoConnect::begin*](api.md#begin).
You can output AutoConnect monitor messages to the **Serial**. A monitor message activation switch is in an include header file [AutoConnect.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnect.h) of library source. Define [**AC_DEBUG**](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnect.h#L27) macro to output the monitor messages.
It can also prevent the captive portal from starting even if the connection at the first *WiFi.begin* fails. In this case, [*AutoConnect::begin*](api.md#begin) behaves same as *WiFi.begin*.
By default, the credentials saving area is occupied from the beginning of EEPROM area. [ESP8266 Arduino core document](http://arduino-esp8266.readthedocs.io/en/latest/filesystem.html?highlight=eeprom#flash-layout) says that:
> EEPROM library uses one sector of flash located [just after the SPIFFS](http://arduino-esp8266.readthedocs.io/en/latest/libraries.html?highlight=SPIFFS#eeprom).
So in the default state, the credential storage area used by AutoConnect conflicts with data owned by the user sketch. It will be destroyed together saved data in EEPROM by user sketch and AutoConnect each other. But you can move the storage area to avoid this.
The [**boundaryOffset**](api.md#boundaryoffset) in [**AutoConnectConfig**](api.md#autoconnectconfig-api) specifies the start offset of the credentials storage area. The default value is 0.
### <i class="fa fa-caret-right"></i> Refers the hosted ESP8266WebServer
Constructing an AutoConnect object variable without parameters then creates and starts an ESP8266WebServer inside the AutoConnect. This object variable could be referred by [*AutoConnect::host()*](api.md#host) function to access ESP8266WebServer instance as like below.
```arduino hl_lines="4"
AutoConnect Portal;
Portal.begin();
ESP8266WebServer& server = Portal.host();
server.send(200, "text/plain", "Hello, world");
```
!!! info "When host() is valid"
The host() can be referred at after *AutoConnect::begin*.
### <i class="fa fa-caret-right"></i> Usage for automatically instantiated ESP8266WebServer
The sketch can handle URL requests using ESP8266WebServer that AutoConnect started internally. ESP8266WebServer instantiated dynamically by AutoConnect can be referred to by [*AutoConnect::host*](api.md#host) function. The sketch can use the '**on**' function, '**send**' function, '**client**' function and others by ESP8266WebServer reference of its return value.
```arduino hl_lines="8 9 13 14 20 21 27"
#include <ESP8266WiFi.h>
#include <ESP8266WebServer.h>
#include <AutoConnect.h>
AutoConnect Portal;
void handleRoot() {
ESP8266WebServer& IntServer = Portal.host();
IntServer.send(200, "text/html", "Hello, world");
}
void handleNotFound() {
ESP8266WebServer& IntServer = Portal.host();
IntServer.send(404, "text/html", "Unknown.");
}
void setup() {
bool r = Portal.begin();
if (r) {
ESP8266WebServer& IntServer = Portal.host();
IntServer.on("/", handleRoot);
Portal.onNotFound(handleNotFound); // For only onNotFound.
}
}
void loop() {
Portal.host().handleClient();
Portal.handleRequest();
/* or following one line code is equ.
Portal.handleClient();
*/
}
```
!!! note "ESP8266WebServer function should be called after AutoConnect::begin"
The sketch cannot refer to an instance of ESP8266WebServer until AutoConnect::begin completes successfully.
!!! warning "Do not use with ESP8266WebServer::begin"
ESP8266WebServer is already running inside the AutoConnect.
### <i class="fa fa-caret-right"></i> Use with the [PageBuilder](https://github.com/Hieromon/PageBuilder) library
In ordinary, the URL handler will respond the request by sending some HTML. [PageBuilder](https://github.com/Hieromon/PageBuilder) library is HTML assembly aid. it can handle predefined HTML as like a template and simplify an HTML string assemble logic, and also the generated HTML send automatically.
An example sketch used with the PageBuilder as follows and it explains how it aids for the HTML generating. Details for [Github repository](https://github.com/Hieromon/PageBuilder).
AutoConnect will activate SoftAP at failed the first *WiFi.begin*. It SoftAP settings are stored in [**AutoConnectConfig**](api.md#autoconnectconfig) as the following parameters. The sketch could be configured SoftAP using these parameters, refer the [AutoConnectConfig API](api.md#autoconnectconfig-api) for details.
### <i class="fa fa-caret-right"></i> Assign user sketch's home path
"**HOME**" for returning to the user's sketch homepage is displayed at the bottom of the AutoConnect menu. It could be set using the [*AutoConnect::home*](api.md#home) function.
A home path of AutoConnect is **/\_ac** by default. You can access from the browser with http://IPADDRESS/\_ac. You can change the home path by revising [**AUTOCONNECT_URI**](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnect.h#L58) macro in the include header file as [AutoConnect.h](https://github.com/Hieromon/AutoConnect/blob/master/src/AutoConnect.h).
It is also possible to assign static IP Address to ESP8266 in STA mode. By default DHCP is enabled and it becomes the IP address assigned by the DHCP server with *WiFi.begin*.
