Added doxygen source documentation

master
Steve Lascos 7 years ago
parent 46b01dd070
commit 423af27664
  1. 3
      .gitignore
  2. 14
      README.md
  3. 91
      src/BAAudioControlWM8731.cpp
  4. 139
      src/BAAudioControlWM8731.h
  5. 14
      src/BAGpio.cpp
  6. 68
      src/BAGpio.h
  7. 11
      src/BAGuitar.h
  8. 4
      src/BASpiMemory.cpp
  9. 46
      src/BASpiMemory.h

3
.gitignore vendored

@ -0,0 +1,3 @@
.cproject
.project

@ -1,2 +1,12 @@
# libBAT
Blackaddr Audio Teensy Library
Blackaddr Audio
Teensy Guitar Audio Library
This library contains convience C++ classes to allow full and easy access to the features of the Teensy Guitar Audio Series of boards.
"Teensy" is an Arduino compatible series of boards from www.pjcr.com
This libray can be downloaded and installed into the Arduino IDE by following the instruction here for installing from a zip:
https://www.arduino.cc/en/Guide/Libraries

@ -23,6 +23,65 @@
namespace BAGuitar {
// use const instead of define for proper scoping
constexpr int WM8731_I2C_ADDR = 0x1A;
// The WM8731 register map
constexpr int WM8731_REG_LLINEIN = 0;
constexpr int WM8731_REG_RLINEIN = 1;
constexpr int WM8731_REG_LHEADOUT = 2;
constexpr int WM8731_REG_RHEADOUT = 3;
constexpr int WM8731_REG_ANALOG =4;
constexpr int WM8731_REG_DIGITAL = 5;
constexpr int WM8731_REG_POWERDOWN = 6;
constexpr int WM8731_REG_INTERFACE = 7;
constexpr int WM8731_REG_SAMPLING = 8;
constexpr int WM8731_REG_ACTIVE = 9;
constexpr int WM8731_REG_RESET = 15;
// Register Masks and Shifts
// Register 0
constexpr int WM8731_LEFT_INPUT_GAIN_ADDR = 0;
constexpr int WM8731_LEFT_INPUT_GAIN_MASK = 0x1F;
constexpr int WM8731_LEFT_INPUT_GAIN_SHIFT = 0;
constexpr int WM8731_LEFT_INPUT_MUTE_ADDR = 0;
constexpr int WM8731_LEFT_INPUT_MUTE_MASK = 0x80;
constexpr int WM8731_LEFT_INPUT_MUTE_SHIFT = 7;
constexpr int WM8731_LINK_LEFT_RIGHT_IN_ADDR = 0;
constexpr int WM8731_LINK_LEFT_RIGHT_IN_MASK = 0x100;
constexpr int WM8731_LINK_LEFT_RIGHT_IN_SHIFT = 8;
// Register 1
constexpr int WM8731_RIGHT_INPUT_GAIN_ADDR = 1;
constexpr int WM8731_RIGHT_INPUT_GAIN_MASK = 0x1F;
constexpr int WM8731_RIGHT_INPUT_GAIN_SHIFT = 0;
constexpr int WM8731_RIGHT_INPUT_MUTE_ADDR = 1;
constexpr int WM8731_RIGHT_INPUT_MUTE_MASK = 0x80;
constexpr int WM8731_RIGHT_INPUT_MUTE_SHIFT = 7;
constexpr int WM8731_LINK_RIGHT_LEFT_IN_ADDR = 1;
constexpr int WM8731_LINK_RIGHT_LEFT_IN_MASK = 0x100;
constexpr int WM8731_LINK_RIGHT_LEFT_IN_SHIFT = 8;
// Register 4
constexpr int WM8731_ADC_BYPASS_ADDR = 4;
constexpr int WM8731_ADC_BYPASS_MASK = 0x8;
constexpr int WM8731_ADC_BYPASS_SHIFT = 3;
constexpr int WM8731_DAC_SELECT_ADDR = 4;
constexpr int WM8731_DAC_SELECT_MASK = 0x10;
constexpr int WM8731_DAC_SELECT_SHIFT = 4;
// Register 5
constexpr int WM8731_DAC_MUTE_ADDR = 5;
constexpr int WM8731_DAC_MUTE_MASK = 0x8;
constexpr int WM8731_DAC_MUTE_SHIFT = 3;
constexpr int WM8731_HPF_DISABLE_ADDR = 5;
constexpr int WM8731_HPF_DISABLE_MASK = 0x1;
constexpr int WM8731_HPF_DISABLE_SHIFT = 0;
// Register 9
constexpr int WM8731_ACTIVATE_ADDR = 9;
constexpr int WM8731_ACTIVATE_MASK = 0x1;
// Reset the internal shadow register array to match
// the reset state of the codec.
void BAAudioControlWM8731::resetInternalReg(void) {
// Set to reset state
regArray[0] = 0x97;
@ -47,6 +106,7 @@ BAAudioControlWM8731::~BAAudioControlWM8731()
{
}
// Powerdown and disable the codec
void BAAudioControlWM8731::disable(void)
{
@ -62,8 +122,8 @@ void BAAudioControlWM8731::disable(void)
resetCodec();
}
bool BAAudioControlWM8731::enable(void)
// Powerup and unmute the codec
void BAAudioControlWM8731::enable(void)
{
// Sequence from WAN0111.pdf
@ -109,18 +169,12 @@ bool BAAudioControlWM8731::enable(void)
regArray[WM8731_REG_POWERDOWN] = 0x02;
delay(500); // wait for output to power up
// // Activate the audio interface
// setActivate(true);
// delay(10);
//setDacMute(false);
delay(100); // wait for mute ramp
return true;
}
// Set the PGA gain on the Left channel
void BAAudioControlWM8731::setLeftInputGain(int val)
{
regArray[WM8731_LEFT_INPUT_GAIN_ADDR] &= ~WM8731_LEFT_INPUT_GAIN_MASK;
@ -129,6 +183,7 @@ void BAAudioControlWM8731::setLeftInputGain(int val)
write(WM8731_LEFT_INPUT_GAIN_ADDR, regArray[WM8731_LEFT_INPUT_GAIN_ADDR]);
}
// Mute control on the ADC Left channel
void BAAudioControlWM8731::setLeftInMute(bool val)
{
if (val) {
@ -139,6 +194,7 @@ void BAAudioControlWM8731::setLeftInMute(bool val)
write(WM8731_LEFT_INPUT_MUTE_ADDR, regArray[WM8731_LEFT_INPUT_MUTE_ADDR]);
}
// Link the gain/mute controls for Left and Right channels
void BAAudioControlWM8731::setLinkLeftRightIn(bool val)
{
if (val) {
@ -152,6 +208,7 @@ void BAAudioControlWM8731::setLinkLeftRightIn(bool val)
write(WM8731_LINK_RIGHT_LEFT_IN_ADDR, regArray[WM8731_LINK_RIGHT_LEFT_IN_ADDR]);
}
// Set the PGA input gain on the Right channel
void BAAudioControlWM8731::setRightInputGain(int val)
{
regArray[WM8731_RIGHT_INPUT_GAIN_ADDR] &= ~WM8731_RIGHT_INPUT_GAIN_MASK;
@ -160,6 +217,7 @@ void BAAudioControlWM8731::setRightInputGain(int val)
write(WM8731_RIGHT_INPUT_GAIN_ADDR, regArray[WM8731_RIGHT_INPUT_GAIN_ADDR]);
}
// Mute control on the input ADC right channel
void BAAudioControlWM8731::setRightInMute(bool val)
{
if (val) {
@ -170,6 +228,7 @@ void BAAudioControlWM8731::setRightInMute(bool val)
write(WM8731_RIGHT_INPUT_MUTE_ADDR, regArray[WM8731_RIGHT_INPUT_MUTE_ADDR]);
}
// Dac output mute control
void BAAudioControlWM8731::setDacMute(bool val)
{
if (val) {
@ -180,6 +239,7 @@ void BAAudioControlWM8731::setDacMute(bool val)
write(WM8731_DAC_MUTE_ADDR, regArray[WM8731_DAC_MUTE_ADDR]);
}
// Switches the DAC audio in/out of the output path
void BAAudioControlWM8731::setDacSelect(bool val)
{
if (val) {
@ -190,6 +250,8 @@ void BAAudioControlWM8731::setDacSelect(bool val)
write(WM8731_DAC_SELECT_ADDR, regArray[WM8731_DAC_SELECT_ADDR]);
}
// Bypass sends the ADC input audio (analog) directly to analog output stage
// bypassing all digital processing
void BAAudioControlWM8731::setAdcBypass(bool val)
{
if (val) {
@ -200,6 +262,7 @@ void BAAudioControlWM8731::setAdcBypass(bool val)
write(WM8731_ADC_BYPASS_ADDR, regArray[WM8731_ADC_BYPASS_ADDR]);
}
// Enable/disable the dynamic HPF (recommended, it creates noise)
void BAAudioControlWM8731::setHPFDisable(bool val)
{
if (val) {
@ -210,6 +273,7 @@ void BAAudioControlWM8731::setHPFDisable(bool val)
write(WM8731_HPF_DISABLE_ADDR, regArray[WM8731_HPF_DISABLE_ADDR]);
}
// Activate/deactive the I2S audio interface
void BAAudioControlWM8731::setActivate(bool val)
{
if (val) {
@ -220,29 +284,26 @@ void BAAudioControlWM8731::setActivate(bool val)
}
// Trigger the on-chip codec reset
void BAAudioControlWM8731::resetCodec(void)
{
write(WM8731_REG_RESET, 0x0);
resetInternalReg();
}
// Direct write control to the codec
void BAAudioControlWM8731::writeI2C(unsigned int addr, unsigned int val)
{
write(addr, val);
}
// Low level write control for the codec via the Teensy I2C interface
bool BAAudioControlWM8731::write(unsigned int reg, unsigned int val)
{
Wire.beginTransmission(WM8731_I2C_ADDR);
Wire.write((reg << 1) | ((val >> 8) & 1));
Wire.write(val & 0xFF);
Wire.endTransmission();
// Serial.print(String("Wrote "));
// Serial.print((reg << 1) | ((val >> 8) & 1), HEX);
// Serial.print(" ");
// Serial.print(val & 0xFF, HEX);
// Serial.print("\n");
return true;
}

@ -1,10 +1,13 @@
/*
* BAAudioControlWM8731.h
/**************************************************************************//**
* BAAudioContromWM8731 is a class for controlling a WM8731 Codec via I2C.
* @details The Codec power ups in a silent state, with non-optimal
* configuration. This class will enable codec and set some initial gain levels.
* The user can than use the API to changing settings for their specific needs.
*
* Created on: May 22, 2017
* Author: slascos
*
* This program is free software: you can redistribute it and/or modify
* @file
* @author Steve Lascos
* @company Blackaddr Audio
* @copyright This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.*
@ -16,7 +19,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
*****************************************************************************/
#ifndef INC_BAAUDIOCONTROLWM8731_H_
#define INC_BAAUDIOCONTROLWM8731_H_
@ -25,90 +28,96 @@
namespace BAGuitar {
// use const instead of define for proper scoping
constexpr int WM8731_I2C_ADDR = 0x1A;
constexpr int WM8731_NUM_REGS = 10;
constexpr int WM8731_REG_LLINEIN = 0;
constexpr int WM8731_REG_RLINEIN = 1;
constexpr int WM8731_REG_LHEADOUT = 2;
constexpr int WM8731_REG_RHEADOUT = 3;
constexpr int WM8731_REG_ANALOG =4;
constexpr int WM8731_REG_DIGITAL = 5;
constexpr int WM8731_REG_POWERDOWN = 6;
constexpr int WM8731_REG_INTERFACE = 7;
constexpr int WM8731_REG_SAMPLING = 8;
constexpr int WM8731_REG_ACTIVE = 9;
constexpr int WM8731_REG_RESET = 15;
// Register Masks and Shifts
// Register 0
constexpr int WM8731_LEFT_INPUT_GAIN_ADDR = 0;
constexpr int WM8731_LEFT_INPUT_GAIN_MASK = 0x1F;
constexpr int WM8731_LEFT_INPUT_GAIN_SHIFT = 0;
constexpr int WM8731_LEFT_INPUT_MUTE_ADDR = 0;
constexpr int WM8731_LEFT_INPUT_MUTE_MASK = 0x80;
constexpr int WM8731_LEFT_INPUT_MUTE_SHIFT = 7;
constexpr int WM8731_LINK_LEFT_RIGHT_IN_ADDR = 0;
constexpr int WM8731_LINK_LEFT_RIGHT_IN_MASK = 0x100;
constexpr int WM8731_LINK_LEFT_RIGHT_IN_SHIFT = 8;
// Register 1
constexpr int WM8731_RIGHT_INPUT_GAIN_ADDR = 1;
constexpr int WM8731_RIGHT_INPUT_GAIN_MASK = 0x1F;
constexpr int WM8731_RIGHT_INPUT_GAIN_SHIFT = 0;
constexpr int WM8731_RIGHT_INPUT_MUTE_ADDR = 1;
constexpr int WM8731_RIGHT_INPUT_MUTE_MASK = 0x80;
constexpr int WM8731_RIGHT_INPUT_MUTE_SHIFT = 7;
constexpr int WM8731_LINK_RIGHT_LEFT_IN_ADDR = 1;
constexpr int WM8731_LINK_RIGHT_LEFT_IN_MASK = 0x100;
constexpr int WM8731_LINK_RIGHT_LEFT_IN_SHIFT = 8;
// Register 4
constexpr int WM8731_ADC_BYPASS_ADDR = 4;
constexpr int WM8731_ADC_BYPASS_MASK = 0x8;
constexpr int WM8731_ADC_BYPASS_SHIFT = 3;
constexpr int WM8731_DAC_SELECT_ADDR = 4;
constexpr int WM8731_DAC_SELECT_MASK = 0x10;
constexpr int WM8731_DAC_SELECT_SHIFT = 4;
// Register 5
constexpr int WM8731_DAC_MUTE_ADDR = 5;
constexpr int WM8731_DAC_MUTE_MASK = 0x8;
constexpr int WM8731_DAC_MUTE_SHIFT = 3;
constexpr int WM8731_HPF_DISABLE_ADDR = 5;
constexpr int WM8731_HPF_DISABLE_MASK = 0x1;
constexpr int WM8731_HPF_DISABLE_SHIFT = 0;
// Register 9
constexpr int WM8731_ACTIVATE_ADDR = 9;
constexpr int WM8731_ACTIVATE_MASK = 0x1;
constexpr int WM8731_NUM_REGS = 10; // Number of registers in the internal shadow array
/**************************************************************************//**
* BAAudioControlWM8731 provides an API for configuring the internal registers
* of the WM8731 codec.
* @details Not every single command is provided, please ask if you need something
* added that is not already present. You can also directly write any register
* you wish with the writeI2C() method.
*****************************************************************************/
class BAAudioControlWM8731 {
public:
BAAudioControlWM8731();
virtual ~BAAudioControlWM8731();
/// Mute and power down the codec.
void disable(void);
bool enable(void);
/// First disable, then cleanly power up and unmute the codec.
void enable(void);
/// Set the input gain of the codec's PGA for the left (TRS Tip) channel.
/// @param val an interger value from 31 = +12dB . . 1.5dB steps down to 0 = -34.5dB
void setLeftInputGain(int val);
/// Set the input gain of the codec's PGA for the right (TRS Ring) channel.
/// @param val an interger value from 31 = +12dB . . 1.5dB steps down to 0 = -34.5dB
void setRightInputGain(int val);
/// Mute/unmute the Left (TRS Tip) channel at the ADC input.
/// @param val when true, channel is muted, when false, channel is unmuted
void setLeftInMute(bool val);
/// Mute/unmute the Right (TRS Ring) channel at the ADC input.
/// @param val when true, channel is muted, when false, channel is unmuted
void setRightInMute(bool val);
/// Links the Left/Right channel contols for mute and input gain.
/// @details when true, changing either the left or right gain/mute controls will
/// affect both channels.
/// @param val when true, channels are linked, when false, they are controlled separately
void setLinkLeftRightIn(bool val);
/// Mute/unmute the output DAC, affects both Left and Right output channels.
/// @param when true, output DAC is muted, when false, unmuted.
void setDacMute(bool val);
/// Control when the DAC is feeding the output analog circuitry.
/// @param val when true, the DAC output is connected to the analog output. When
/// false, the DAC is disconnected.
void setDacSelect(bool val);
/// ADC Bypass control.
/// @details This permits the analog audio from the Codec's PGA to bypass the ADC
/// and go directly to the analog output of the codec, bypassing the digital domain
/// entirely.
/// @param val when true, analog ADC input is fed directly to codec analog otuput.
void setAdcBypass(bool val);
void setHPFDisable(bool val);
/// Digital High Pass Filter disable. RECOMMENDED ALWAYS TRUE!
/// @details this controls a HPF in the codec that attempts to remove the lowest
/// frequency (i.e. < 10 Hz) to improve headroom by dynamically measuring DC level.
/// In most cases, it introduces noise components by modulating the filter. This
/// is not suitable for applications where the audio is used for output, but might
/// be useful for applications like tuning, pitch detection, whre the noise components
/// can be tolerated.
/// @param val when true (recommended) the dynamic HPF is disabled, otherwise enabled.
void setHPFDisable(bool val);
/// Activates the I2S interface on the codec.
/// @param val when true, I2S interface is active, when false it is disabled.
void setActivate(bool val);
/// Soft-reset the codec.
/// @details This will cause the codec to reset its internal registers to default values.
void resetCodec(void);
/// Write a custom command to the codec via I2C control interface.
/// @details See WM8731 datasheet for register map details.
/// @param addr The register address you wish to write to, range 0 to 15.
/// @param val the 9-bit data value you wish to write at the address specifed.
void writeI2C(unsigned int addr, unsigned int val);
protected:
// A shadow array for the registers on the codec since the interface is write-only.
int regArray[WM8731_NUM_REGS];
private:
// low-level write command
bool write(unsigned int reg, unsigned int val);
// resets the internal shadow register array
void resetInternalReg(void);
};

@ -13,10 +13,6 @@ namespace BAGuitar {
BAGpio::BAGpio()
{
// Set all GPIOs to input
// for (auto i=0; i<NUM_GPIO; i++) {
// m_gpioState = 1;
// }
pinMode(static_cast<uint8_t>(GPIO::GPIO0), INPUT);
pinMode(static_cast<uint8_t>(GPIO::GPIO1), INPUT);
pinMode(static_cast<uint8_t>(GPIO::GPIO2), INPUT);
@ -28,9 +24,9 @@ BAGpio::BAGpio()
pinMode(static_cast<uint8_t>(GPIO::TP1), INPUT);
pinMode(static_cast<uint8_t>(GPIO::TP2), INPUT);
// Set the LED ot ouput
pinMode(USR_LED_ID, OUTPUT);
m_ledState = 0;
clearLed(); // turn off the LED
}
@ -51,10 +47,11 @@ void BAGpio::clearGPIO(GPIO gpioId)
digitalWrite(static_cast<uint8_t>(gpioId), 0);
}
void BAGpio::toggleGPIO(GPIO gpioId)
int BAGpio::toggleGPIO(GPIO gpioId)
{
int data = digitalRead(static_cast<uint8_t>(gpioId));
digitalWrite(static_cast<uint8_t>(gpioId), ~data);
return ~data;
}
void BAGpio::setLed()
@ -67,10 +64,11 @@ void BAGpio::clearLed()
digitalWrite(USR_LED_ID, 0);
m_ledState = 0;
}
void BAGpio::toggleLed()
int BAGpio::toggleLed()
{
m_ledState = ~m_ledState;
digitalWrite(USR_LED_ID, m_ledState);
return m_ledState;
}

@ -1,10 +1,11 @@
/*
* BAGpio.h
/**************************************************************************//**
* BAGPio is convenience class for accessing the the various GPIOs available
* on the Teensy Guitar Audio series boards.
*
* Created on: May 22, 2017
* Author: slascos
*
* This program is free software: you can redistribute it and/or modify
* @file
* @author Steve Lascos
* @company Blackaddr Audio
* @copyright This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.*
@ -16,17 +17,18 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
*****************************************************************************/
#ifndef SRC_BAGPIO_H_
#define SRC_BAGPIO_H_
namespace BAGuitar {
//constexpr int NUM_GPIO = 10;
constexpr uint8_t USR_LED_ID = 16;
constexpr uint8_t USR_LED_ID = 16; ///< Teensy IO number for the user LED.
/**************************************************************************//**
* GPIOs and Testpoints are accessed via enumerated class constants.
*****************************************************************************/
enum class GPIO : uint8_t {
GPIO0 = 2,
GPIO1 = 3,
@ -41,39 +43,47 @@ enum class GPIO : uint8_t {
TP1 = 34,
TP2 = 33
};
//// J3 - GPIO Header
//constexpr int GPIO0 = 2;
//constexpr int GPIO1 = 3;
//constexpr int GPIO2 = 4;
//constexpr int GPIO3 = 6;
//
//// J6 - GPIO Header
//constexpr int GPIO4 = 12;
//constexpr int GPIO5 = 32;
//constexpr int GPIO6 = 27;
//constexpr int GPIO7 = 28;
// Test points
//constexpr int TP1 = 34;
//constexpr int TP2 = 33;
/**************************************************************************//**
* BAGpio provides a convince class to easily control the direction and state
* of the GPIO pins available on the TGA headers.
* @details you can always control this directly with Arduino commands like
* digitalWrite(), etc.
*****************************************************************************/
class BAGpio {
public:
BAGpio();
virtual ~BAGpio();
/// Set the direction of the specified GPIO pin.
/// @param gpioId Specify a GPIO pin such as GPIO::GPIO0
/// @param specify direction as INPUT or OUTPUT which are Arduino constants
void setGPIODirection(GPIO gpioId, int direction);
/// Set the state of the specified GPIO to high
/// @param gpioId gpioId Specify a GPIO pin such as GPIO::GPIO0
void setGPIO(GPIO gpioId);
/// Clear the state of the specified GPIO pin.
/// @param gpioId gpioId Specify a GPIO pin such as GPIO::GPIO0
void clearGPIO(GPIO gpioId);
void toggleGPIO(GPIO gpioId);
/// Toggle the state of the specified GPIO pin. Only works if configured as output.
/// @param gpioId gpioId Specify a GPIO pin such as GPIO::GPIO0
/// @returns the new state of the pin
int toggleGPIO(GPIO gpioId);
/// Turn on the user LED
void setLed();
/// Turn off the user LED
void clearLed();
void toggleLed();
/// Toggle the stage of the user LED
/// @returns the new stage of the user LED.
int toggleLed();
private:
//bool m_gpioState[NUM_GPIO];
uint8_t m_ledState;
};

@ -25,16 +25,11 @@
#include "BASpiMemory.h"
#include "BAGpio.h"
/**************************************************************************//**
* BAGuitar is a namespace/Library for Guitar processing from Blackaddr Audio.
*****************************************************************************/
namespace BAGuitar {
#define AUDIO_BLOCK_SIZE 128
// Spi Memory
constexpr int SPI_MAX_ADDR = 131071;
// LED
constexpr int usrLED = 16;
}
#endif /* SRC_BATGUITAR_H_ */

@ -61,6 +61,7 @@ BASpiMemory::BASpiMemory(SpiDeviceId memDeviceId, uint32_t speedHz)
m_Init();
}
// Intitialize the correct Arduino SPI interface
void BASpiMemory::m_Init()
{
@ -93,9 +94,9 @@ void BASpiMemory::m_Init()
}
BASpiMemory::~BASpiMemory() {
// TODO Auto-generated destructor stub
}
// Single address write
void BASpiMemory::write(int address, int data)
{
@ -131,6 +132,7 @@ void BASpiMemory::write(int address, int data)
digitalWrite(m_csPin, HIGH);
}
// single address read
int BASpiMemory::read(int address)
{

@ -1,10 +1,11 @@
/*
* BASpiMemory.h
/**************************************************************************//**
* BASpiMemory is convenience class for accessing the optional SPI RAMs on
* the GTA Series boards.
*
* Created on: May 22, 2017
* Author: slascos
*
* This program is free software: you can redistribute it and/or modify
* @file
* @author Steve Lascos
* @company Blackaddr Audio
* @copyright This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.*
@ -16,7 +17,7 @@
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
*****************************************************************************/
#ifndef SRC_BASPIMEMORY_H_
#define SRC_BASPIMEMORY_H_
@ -24,25 +25,50 @@
namespace BAGuitar {
constexpr int SPI_MAX_ADDR = 131071; ///< Max address size per chip
/**************************************************************************//**
* This class enumerates access to the two potential SPI RAMs.
*****************************************************************************/
enum class SpiDeviceId {
SPI_DEVICE0,
SPI_DEVICE1
};
/**************************************************************************//**
* This wrapper class uses the Arduino SPI (Wire) library to access the SPI ram.
* @details The purpose of this class is primilary for functional testing since
* it currently support single-word access. High performance access should be
* done using DMA techniques in the Teensy library.
*****************************************************************************/
class BASpiMemory {
public:
BASpiMemory() = delete;
/// Create an object to control either MEM0 (via SPI1) or MEM1 (via SPI2).
/// @details default is 20 Mhz
/// @param memDeviceId specify which MEM to controlw with SpiDeviceId.
BASpiMemory(SpiDeviceId memDeviceId);
/// Create an object to control either MEM0 (via SPI1) or MEM1 (via SPI2)
/// @param memDeviceId specify which MEM to controlw with SpiDeviceId.
/// @param speedHz specify the desired speed in Hz.
BASpiMemory(SpiDeviceId memDeviceId, uint32_t speedHz);
virtual ~BASpiMemory();
/// write a single data word to the specified address
/// @param address the address in the SPI RAM to write to
/// @param data the value to write
void write(int address, int data);
/// read a single data word from the specified address
/// @param address the address in the SPI RAM to read from
/// @return the data that was read
int read(int address);
private:
SpiDeviceId m_memDeviceId;
uint8_t m_csPin;
SPISettings m_settings;
SpiDeviceId m_memDeviceId; // the MEM device being control with this instance
uint8_t m_csPin; // the IO pin number for the CS on the controlled SPI device
SPISettings m_settings; // the Wire settings for this SPI port
void m_Init();
};

Loading…
Cancel
Save